Search results for: 'Spa'

REFERENCE NUMBER: M-5262 (1313CBDSXX12) L

RIETER UNILAP SPARE PARTS MODEL E-32 YEAR 2002

 

QUANTITY AVAILABLE: 73

Learn More

REFERENCE NUMBER: A-1228 (0101GHBXX12) A SCHLAFHORST SRZ SE 9 ACO 288 YEARS 1993 & 1995 BELCORO 340BD 7 MACHINES 1993 1 MACHINE 1995 QUANTITY AVAILABLE: 8 Learn More

REFERENCE NUMBER: M-3803

SCHLAFHORST SRZ SE ACO 288 FOR COTTON DENIM YARNS YEAR 1993-1995

 

SCHLAFHORST OPEN END SPINNING MACHINES FOR COTTON DENIM YARNS

SCHLAFHORST SRZ SE 9 ACO 288

7 X YEAR 1993

1 X YEAR 1995

240 ROTORS PER MACHINE

ROTOR TYPE: BELCORO 340BD

NAVAL: KN4 (SCHLAFHORST)

PIECER: TWO (2) PER MACHINE

DOFFER/SHUTTLE: ONE (1) PER MACHINE

COROLAB CLEARING SYSTEM INSTALLED PER MACHINE

NO WAXING DEVICES

(1) STARTER STATION PER MACHINE

COMBING ROLL: B174

SLUBBING DEVICE: ENGINEERED TO MODEL AMSLER MACHINE

VOLTAGE: 480/60HZ

 

(5) SPARE SECTIONS (48 POSITIONS COMPLETE, 48 POSITIONS WITH SPIN BOX, BUT WINDING ENDS MISSING, 24 POSITIONS STRIPPED OF PARTS)

(3) SPARE PIECERS (MOST PARTS MISSING)

(1) SPARE DOFFER

(1) SPARE SHUTTLE

 

QUANTITY: 8

Learn More

A-2101 MURATA VORTEX MSV861 AIR JET SPINNING FRAMES, YEAR 2006-2007, 80 SPINDLES

YEAR: 2006
MODEL: MSV861
80 SPINDLES PER FRAME
6 INCH TUBE TAKE UP
3 MURATEC SPLICERS PER FRAME
1 MARATEC AUTOMATIC DOFFERS WITH FRONT YARN CONVEYORS
MURATEC “VOS II” YARN MANAGEMENT SYSTEM
WAXING DEVICES
SPINDLES INSTALLED: 1/3 (SPARE DIAMETER 1.1 & 1.2)
NEEDLE HOLDER: 2PZ8.8L8
NOZZLE: 4 HOLES ECO (Z)1
4 LINE SILVER CREELS FOR 20 INCH DIAMETER CANS
1 MACHINE SET UP FOR COTTON

YEAR: 2007
MODEL: MVS861
80 SPINDLES
6 INCH TUBE TAKE UP
3 MURATEC SPLICERS
1 MURATEX AUTOMATIC DOFFERS WITH FRONT YARN CONVEYORS
MURATEC “VOS II” YARN MANAGEMENT SYSTEM
WAXING DEVICES
SPINDLES INSTALLED: 1/3 (SPARE DIAMETER 1.1 & 1.2)
NEEDLE HOLDER: 2PZ8.8L8
NOZZLE: 4 HOLES ECO (Z)1
4 LINE SILVER CREELS FOR 20 INCH DIAMETER CANS

QUANTITY: 2

Learn More

REFERENCE NUMBER: K-4401 COMPLETE SPINNING WEAVING MILL –YEAR 2006 TO 2009 QUANTITY AVAILABLE: 1 Learn More

V-1449 RIETER E65 COMBERS WITH RIETER E32 LAP FORMER, YEAR 2006

(4) X RIETER E65 COMBING MACHINES
MAKE: RIETER
MODEL: E65
YEAR: 2006
QUANTITY: 4
NO.OF DELIVERIES: SINGLE
NO OF DOUBLING: 8
MATERIAL PROCESSED: COTTON
TROLLEYS AVAILABLE: 8
UNICOMB MAKE: GRAF
TOP COMB MAKE: GRAF
EXHAUST/WASTE SUCTION: UPWARDS
SPOOL DIAMETER: 200 mm SPOOL WIDTH: 300 mm
UNICOMB TYPE: PRIMA COMB 8015
TOP COMB TYPE: 2026
DIAMETER AND HEIGHT OF CAN: 24" X 47"
SPARE SPOOLS: 50 SPOOLS AND 6 TROLLEYS
THEY DO NOT HAVE INDIVIDUAL HEAD MONITORING
THEY HAVE ON LIGHT BARRIER TO MONITOR 8 HEADS
QUANTITY: 4

(1) X RIETER E32 LAP FORMER MACHINE
MAKE: RIETER
MODEL: E32
YEAR: 2006
NUMBER OF TROLLEYS: 16
NUMBER OF DOUBLINGS SLF: 32
QUANTITY: 1

Learn More

P-2964 SCHLAFHORST SYSTEM 238 GKW DX-P AUTOMATIC WINDER YEAR 1996 20 HEADS

SCHLAFHORST
TYPE: SYSTEM 238 GKW DX-P
AUTOMATIC WINDER
YEAR: 1996
20 HEADS
SPLICER PER SPINDLE
6 INCHES TRAVERSE CYLINDRICAL WITH 2 SYMMETRICAL DRUMS
WAXING DEVICE
“LOEPFE” YARN MASTER CLEARERS FR700, TYPE TK760
AUTOSPEED
1 DOFFER + DEVICE TO AVOID WARP YARNS
“LUWA” BLOWER/SUCTION
SPARE PARTS TOGETHER WITH THIS MACHINE:
7 COMPLETE HEADS
1 SUCTION BOX
1 PALLET WITH ASSORTED SPARE PARTS
20/30 ELECTRONIC PLATES

QUANTITY: 1

Learn More

R-1732 MURATA VORTEX AIR JET SPINNING MACHINE WITH 80 SPINDLES, YEAR 2007

MURATA VORTEX AIR JET SPINNING MACHINE
YEAR: 2007
MODEL: MVS. 861
80 SPINDLES PER MACHINE
6 INCH TUBE TAKE UP
3 MURATEC SPLICERS PER FRAME
1 MURATEC AUTOMATIC DOFFERS
WITH FRONT YARN CONVEYORS
MURATEC “VOS II” YARN MANAGEMENT SYSTEM WAXING DEVICES SPINDLE INSTALLED: 1.3
(SPARE DIAMETER 1,1 & 1,2)
NEEDLE HOLDER: 2PZ8.8L8
NOZZLE: 4-HOLES ECO (Z)1
4 LINE SLIVER CREELS FOR 20 INCH DIAMETER CANS

QUANTITY: 3

Learn More

H-1261 GOOSE FEATHER CLEANING MACHINE

LIST OF COMPONENTS FOR THE GOOSE FEATHER CLEANING MACHINE:

1) RINSING MACHINE OF THE TYPE 2000 (STAINLESS STEEL USED FOR IT)
EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM
QUANTITY: 1

2) GOOSE FEATHER ADDING MACHINE
EXTERIOR DIMENSION: 4000×1800×3300MM
QUANTITY: 1

3) WATER TANK
EXTERIOR DIMENSION: Ф1930MM×2440MM
QUANTITY: 1

4) DEWATERING MACHINE FLAT PLATE TYPE (BEING EQUIPPED WITH VARIABLE FREQUENCY CONTROL) - 2 SETS
QUANTITY: 2

5)DRYER OF THE TYPE 2000 (BEING EQUIPPED WITH ELECTRONIC WEIGHING)
EXTERIOR DIMENSION: 4500×2100×2900MM
QUANTITY: 1

6)GOOSE FEATHER ADDING MACHINE FOR DRYER(STAINLESS STEEL USED FOR IT AND ELECTRONIC WEIGHING INCLUDED)
EXTERIOR DIMENSION: 1500×1200×3600MM
QUANTITY: 1

7)THE COOLER OF THE TYPE 4700(STEEL & WOOD STRUCTURE, OPTIMIZED MOISTURE PROOF PANEL)
EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM
QUANTITY: 1

8) SORTING EQUIPMENT
QUANTITY: 2

9) POWER DISTRIBUTION CABINET
QUANTITY: 2

RINSING MACHINE: TYPE 2000

1. EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM DIAMETER

2.THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL IS USED FOR THE WALL FOR WASHING MACHINE AND 5MM IN THICKNESS FOR BARREL

3. THE MATERIAL OF AISI 1045 IS USED FOR THE SPINDLE OF THE SQUARE SHAPE(SPECIFICATION =108MMX108MM). WRAPPED WITH 2MM STAINLESS STEEL IN THE OUTER.
10MM IN THICKNESS STAINLESS STEEL IS FOR HOOP OF VANE.
4MM IN THICKNESS STAINLESS STEEL WHICH IS FOLDED IS FOR VANE.
HOOP SCREW OF M14 X 70 (HIGH STRENGTH GRADE) ARE USED.
THE BEARING HOUSING &BEARING OF UKP318 IS USED FOR THE SPINDLE.

4.THE SIEVE OF 1.5MM IN THICKNESS STAINLESS STEEL IS USED FOR WACHING MACHINE.THE HOLE IS 1.8MM IN DIAMETER. HOLE SPACING 3.8MM .THE STAINLESS STEEL OF 2MM IS USED FOR THE OBLIQUE OF OUTPUTTING THE GOOSE FEATHER.THE OUTLET NEAR DEWATERING MACHINE FOR GOOSE FEATHER CAN BE TURNED UPWARD. FOR GOOSE FEATHER.

5.THE PIPE FOR WATER INLET IS 114MM IN DIAMETER

6.THE POWER OF FAN: 7.5KW AND SPEED: 2900R/M

7.THE PIPE FOR FEEDING GOOSE FEATHER IS 250MM IN DIAMETER.

8.THE REDUCER FOR THE SPINDLE: JZQ-400. THE POWER OF MOTOR IS 15KW AND OUTPUT SPEED IS 42 R/M

9.EXTERIOR DIMENSION OF THE BOTTOM FOR WASHING MACHINE: WIDTH=1600MM;LENGTH=3500MM.ONE SIEVE OF 1MM IN THICKNESS FOR IT.

WATER TANK

1. THE DIMENSION OF TANK: Ф1930MM×2440MM

2.THE STAINLESS STEELOF 2MM IN THICKNESS FOR ITS BARREL AND 3MM FOR THE BOTTOM.THE COVER IS CONSTUCTED WITH ANGLE IRON OF STAINLESS STEEL AND INNER COVER 2MM STAINLESS STEEL PLATE.

DEWATERING MACHINE OF TYPE 1600

1. ONE SETS OF RINSING MACHING OF THE TYPE 2000 IS EQUIPPED WITH TWO SETS DEWATERING MACHINE OF THE TYPE 1600

2.THE POWER OF MOTOR=11KW-17KW.DOUBLE SPEED MOTOR WITH VARIABLE FREQUENCY CONTROL.

DRYER OF TYPE 2000

1. EXTERIOR DIMENSION: 4500×2100×2900×Ф1800MM（DIAMETER）

2. THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL(Q345R) IS USED FOR THE WALL FOR WASHING MACHINE. 10MM STAINLESS STEEL(Q345R) IS USED FOR INNER COVER OF THE BARREL AND 10MM STAINLESS STEEL (Q345R) PLATE FOR OUTER COVER OF THE BARREL.

3. THE INNER WALL OF WIND PLATE IS 0.5MM IN THICKNESS AND THE HOLE 1.5MM IN DIAMETER STAINLESS STEEL. 3MM COLD ROLLED PLATE IS USED FOR THE OUTER GATE.

4. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 10MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M12X70

6. THERE ARE FOUR INLET OF 1.5INCH IN DIAMETER FOR STEAM.
RELIEF VALVE FROM 3 KILO TO 7 (1 SETS)
THE PRESSURE GAGE (0-16 KILO) (2 SETS)
THE THERMOMETER (0-150 DEGREE) (1 SETS)
THERE ARE THREE DRAIN HOLE OF 1.5 INCH IN DIAMETER AT THE BOTTOM

6. THERE ARE TWO LAYERS FOR GOOSE FEATHER ADDING FOR DRYER: 1.5×1.2×3.6M.THEY ARE MADE WITH STAINLESS STEEL.THE SPECIFICATION OF CHARGING SPOUT ON THE TOP OF DRYER IS 1.55 X 0.55M.

7. THE OUTLET FOR GOOSE FEATHER OF DRYER CAN BE TURNED UPWARD.THE PIPE FOR OUTPUTTING GOOSE FEATHER IS 300MM IN DIAMETER.

8. TWO FANS ARE EQUIPPED FOR PRECISE WASHING LINE.THE POWER OF FAN FOR ADDING GOOSE FEATHER IS 7.5KW,SPEED: 2900R/M.WHICH IS USED TOGETHER WITH GOOSE ADDING MACHINE OF WASHING MACHINE.THE POWER OF FAN FOR DRYER IS 5.5KW,SPEED IS 2900 R/M.

9. MAIN SHAFT SPEED REDUCER FOR BELT BRIDGE MOTOR 7.5KW.OUTPUT SPEED IS 52 R/M
THE COOLER IS OF TYPE 4700

1. EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM DIAMETER

2. THE EXTERIOR IS CONSTRUCTED WITH THE WHOLE WOOD STRUCTURE.THE MATERIAL OF STEEL WITH 4# ANGLE STEEL AND 30X30 SQUARE TUBE IS FOR THE INNER SKELETON.

3. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 14MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M16X70

4. THE DIAMETER OF WIND PIPE: MAIN PIPE IS 300MM IN DIAMETER AND BRANCH IS 250MM IN DIAMETER.THERE ARE FOUR AIR OUTLET OF 300MM IN DIAMETER EQUIPPED EQUALLY SPACE.

5. ONE SIEVE IS EQUIPPED FOR THE COOLER.THE SIEVE IS MADE WITH 0.6MM IN THICKNESS GALVANIZED STEEL SHEET.THE HEIGHT OF HOLE IS 1.1MM.THE SCREEN FRAME IS MADE WITH 3# ANGLE STEEL.

6.THERE ARE TWO SORTING BOX WHICH IS CONSTRUCTED WITH STEEL FRAME AND WOODEN STRUCTURE. SIEVE 14 MESH GALVANIZED MESH BOLD

7. ONE FAN IS FOR THE COOLER.THE POWER OF THE FAN IS 11KW AND OUTPUT SPEED IS 2900 R/M

8. THE MOTOR FOR THE MAIN SPINDLE IS 15KW (6 POLE).THE SPEED OF 140 R/M IS FOR THE COOLER.

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-3150

COMPLETE OPEN END PLANT WITH 1200 ROTORS YEAR 1990-2005

 

COMPLETE OPEN END PLANT WITH 1.200 ROTORS

YEAR FROM 1990 TO 2005

 

1 LINE WORKED  100% PURE COTTON

1 LINE WORKED  100% COTTON WASTE 

PRODUCTION CAPACITY  MAX 10.000 KGS PER DAY

NE COUNTS: FROM NE 5 TO NE 30

380 VOLTS 50 HZ

 
BLOWROOM

01 TRUETZSCHLER BLENDOMAT BDT-019/2.300 , YEAR 1993, W.W. 2.300 MM
01 RIETER MONOCYLINDER B4/1, YEAR 1990

01 RIETER FEEDER B3/3R, YEAR 1990

01 RIETER UNIMIX B7/3, YEAR 1990

01 TRUETZSCHLER CAGE CONDENSER BRC01,YEAR 2005

01 TRUETZSCHLER MXU6- MULTI MIXER, YEAR 2005
01 TRUETZSCHLER MXU6- MULTI MIXER INCORPORATE WHIT CLC1, YEAR 2005

01 TRUETZSCHLER SCFO SECUROMAT FOREIGN FIBRE DETECTOR, YEAR 2005

01 TRUETZSCHLER FEEDER BOU3, YEAR 2005
01 TRUETZSCHLER CVT3 CLEANER, YEAR 1999

02  TRUETZSCHLER DX DUSTEX, YEAR 1993 AND 2005
01 JOSSI VISION SHELD, YEAR 2007

CARDS

10  TRUTZSCHLER DK 803 CARDS, YEAR  1999

TRUTZSCHLER CHUTE FEED
ALLUMINIUM FLATH
CANS DIA 1000MM X 1190MM
AUTOMATIC  CAN CHANGERS

DRAWFRAMES

02 RIETER SB 51 DRAWFRAMES, YEAR 1990
CAN DIA 600MM X 1200MM
AUTOMATIC CAN CHANGER

 

01 RIETER RSB 51 DRAWFRAMES,  YEAR 1990
CAN DIA 600MM X 1200MM
AUTOMATIC CAN CHANGER

 
01 RIETER RSB D30 DRAWFRAMES , YEAR 2001
CAN DIA 450MM X 1070MM
WITH AUTO LEVELLING AND AUTOMATIC CAN CHANGERS

 

01 RIETER RSB D35 DRAWFRAMES , YEAR 2005
CAN DIA 450MM X 1070MM
WITH AUTO LEVELLING AND AUTOMATIC CAN CHANGERS

02  VOUK  SH802 , YEAR 1994 AND 1995
CAN DIA 450MM X 1070MM
WITH AUTO LEVELLING AND AUTOMATIC CAN CHANGERS

 

OPEN END
03 SCHLAFHORST AUTOCORO OPEN END SPINNING FRAME , 2 X YEAR 2000 , 1 X YEAR 2001
TYPE ACO 288 WITH SE 11 SPINBOX , SRZ  6”
240 ROTORS , ROTOR 33/36/40 ,OPENING ROLLER TYPE B174 OR OB20
WAXING, WITH  CLEARERS COROLAB MODEL V.3.6. 2 X AUTOMATIC YARN PIECER ASW

02 SCHLAFHORST AUTOCORO OPEN END SPINNING FRAME , YEAR 1995
TYPE ACO 288 WITH SE 9 SPINBOX , SRZ  6”
240 ROTORS , ROTOR 33,OPENING ROLLER TYPE B174 OR OB20
WAXING, CLEARERS COROLAB FOREING FIBER MODEL V.3.6.U1.39 ,  2 X AUTOMATIC YARN PIECER ASW

INCLUDED IN THE PLANT

CENTRAL SUCTION
CANS

02 HORIZONTAL PRESS  RIETER A5/1, YEAR 1990 ,WHIT FASER COMPACTOR  

SPARE PARTS

CATALOGS

Learn More