Search results for: 'Cover ba'

H-1261 GOOSE FEATHER CLEANING MACHINE

LIST OF COMPONENTS FOR THE GOOSE FEATHER CLEANING MACHINE:

1) RINSING MACHINE OF THE TYPE 2000 (STAINLESS STEEL USED FOR IT)
EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM
QUANTITY: 1

2) GOOSE FEATHER ADDING MACHINE
EXTERIOR DIMENSION: 4000×1800×3300MM
QUANTITY: 1

3) WATER TANK
EXTERIOR DIMENSION: Ф1930MM×2440MM
QUANTITY: 1

4) DEWATERING MACHINE FLAT PLATE TYPE (BEING EQUIPPED WITH VARIABLE FREQUENCY CONTROL) - 2 SETS
QUANTITY: 2

5)DRYER OF THE TYPE 2000 (BEING EQUIPPED WITH ELECTRONIC WEIGHING)
EXTERIOR DIMENSION: 4500×2100×2900MM
QUANTITY: 1

6)GOOSE FEATHER ADDING MACHINE FOR DRYER(STAINLESS STEEL USED FOR IT AND ELECTRONIC WEIGHING INCLUDED)
EXTERIOR DIMENSION: 1500×1200×3600MM
QUANTITY: 1

7)THE COOLER OF THE TYPE 4700(STEEL & WOOD STRUCTURE, OPTIMIZED MOISTURE PROOF PANEL)
EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM
QUANTITY: 1

8) SORTING EQUIPMENT
QUANTITY: 2

9) POWER DISTRIBUTION CABINET
QUANTITY: 2

RINSING MACHINE: TYPE 2000

1. EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM DIAMETER

2.THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL IS USED FOR THE WALL FOR WASHING MACHINE AND 5MM IN THICKNESS FOR BARREL

3. THE MATERIAL OF AISI 1045 IS USED FOR THE SPINDLE OF THE SQUARE SHAPE(SPECIFICATION =108MMX108MM). WRAPPED WITH 2MM STAINLESS STEEL IN THE OUTER.
10MM IN THICKNESS STAINLESS STEEL IS FOR HOOP OF VANE.
4MM IN THICKNESS STAINLESS STEEL WHICH IS FOLDED IS FOR VANE.
HOOP SCREW OF M14 X 70 (HIGH STRENGTH GRADE) ARE USED.
THE BEARING HOUSING &BEARING OF UKP318 IS USED FOR THE SPINDLE.

4.THE SIEVE OF 1.5MM IN THICKNESS STAINLESS STEEL IS USED FOR WACHING MACHINE.THE HOLE IS 1.8MM IN DIAMETER. HOLE SPACING 3.8MM .THE STAINLESS STEEL OF 2MM IS USED FOR THE OBLIQUE OF OUTPUTTING THE GOOSE FEATHER.THE OUTLET NEAR DEWATERING MACHINE FOR GOOSE FEATHER CAN BE TURNED UPWARD. FOR GOOSE FEATHER.

5.THE PIPE FOR WATER INLET IS 114MM IN DIAMETER

6.THE POWER OF FAN: 7.5KW AND SPEED: 2900R/M

7.THE PIPE FOR FEEDING GOOSE FEATHER IS 250MM IN DIAMETER.

8.THE REDUCER FOR THE SPINDLE: JZQ-400. THE POWER OF MOTOR IS 15KW AND OUTPUT SPEED IS 42 R/M

9.EXTERIOR DIMENSION OF THE BOTTOM FOR WASHING MACHINE: WIDTH=1600MM;LENGTH=3500MM.ONE SIEVE OF 1MM IN THICKNESS FOR IT.

WATER TANK

1. THE DIMENSION OF TANK: Ф1930MM×2440MM

2.THE STAINLESS STEELOF 2MM IN THICKNESS FOR ITS BARREL AND 3MM FOR THE BOTTOM.THE COVER IS CONSTUCTED WITH ANGLE IRON OF STAINLESS STEEL AND INNER COVER 2MM STAINLESS STEEL PLATE.

DEWATERING MACHINE OF TYPE 1600

1. ONE SETS OF RINSING MACHING OF THE TYPE 2000 IS EQUIPPED WITH TWO SETS DEWATERING MACHINE OF THE TYPE 1600

2.THE POWER OF MOTOR=11KW-17KW.DOUBLE SPEED MOTOR WITH VARIABLE FREQUENCY CONTROL.

DRYER OF TYPE 2000

1. EXTERIOR DIMENSION: 4500×2100×2900×Ф1800MM（DIAMETER）

2. THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL(Q345R) IS USED FOR THE WALL FOR WASHING MACHINE. 10MM STAINLESS STEEL(Q345R) IS USED FOR INNER COVER OF THE BARREL AND 10MM STAINLESS STEEL (Q345R) PLATE FOR OUTER COVER OF THE BARREL.

3. THE INNER WALL OF WIND PLATE IS 0.5MM IN THICKNESS AND THE HOLE 1.5MM IN DIAMETER STAINLESS STEEL. 3MM COLD ROLLED PLATE IS USED FOR THE OUTER GATE.

4. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 10MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M12X70

6. THERE ARE FOUR INLET OF 1.5INCH IN DIAMETER FOR STEAM.
RELIEF VALVE FROM 3 KILO TO 7 (1 SETS)
THE PRESSURE GAGE (0-16 KILO) (2 SETS)
THE THERMOMETER (0-150 DEGREE) (1 SETS)
THERE ARE THREE DRAIN HOLE OF 1.5 INCH IN DIAMETER AT THE BOTTOM

6. THERE ARE TWO LAYERS FOR GOOSE FEATHER ADDING FOR DRYER: 1.5×1.2×3.6M.THEY ARE MADE WITH STAINLESS STEEL.THE SPECIFICATION OF CHARGING SPOUT ON THE TOP OF DRYER IS 1.55 X 0.55M.

7. THE OUTLET FOR GOOSE FEATHER OF DRYER CAN BE TURNED UPWARD.THE PIPE FOR OUTPUTTING GOOSE FEATHER IS 300MM IN DIAMETER.

8. TWO FANS ARE EQUIPPED FOR PRECISE WASHING LINE.THE POWER OF FAN FOR ADDING GOOSE FEATHER IS 7.5KW,SPEED: 2900R/M.WHICH IS USED TOGETHER WITH GOOSE ADDING MACHINE OF WASHING MACHINE.THE POWER OF FAN FOR DRYER IS 5.5KW,SPEED IS 2900 R/M.

9. MAIN SHAFT SPEED REDUCER FOR BELT BRIDGE MOTOR 7.5KW.OUTPUT SPEED IS 52 R/M
THE COOLER IS OF TYPE 4700

1. EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM DIAMETER

2. THE EXTERIOR IS CONSTRUCTED WITH THE WHOLE WOOD STRUCTURE.THE MATERIAL OF STEEL WITH 4# ANGLE STEEL AND 30X30 SQUARE TUBE IS FOR THE INNER SKELETON.

3. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 14MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M16X70

4. THE DIAMETER OF WIND PIPE: MAIN PIPE IS 300MM IN DIAMETER AND BRANCH IS 250MM IN DIAMETER.THERE ARE FOUR AIR OUTLET OF 300MM IN DIAMETER EQUIPPED EQUALLY SPACE.

5. ONE SIEVE IS EQUIPPED FOR THE COOLER.THE SIEVE IS MADE WITH 0.6MM IN THICKNESS GALVANIZED STEEL SHEET.THE HEIGHT OF HOLE IS 1.1MM.THE SCREEN FRAME IS MADE WITH 3# ANGLE STEEL.

6.THERE ARE TWO SORTING BOX WHICH IS CONSTRUCTED WITH STEEL FRAME AND WOODEN STRUCTURE. SIEVE 14 MESH GALVANIZED MESH BOLD

7. ONE FAN IS FOR THE COOLER.THE POWER OF THE FAN IS 11KW AND OUTPUT SPEED IS 2900 R/M

8. THE MOTOR FOR THE MAIN SPINDLE IS 15KW (6 POLE).THE SPEED OF 140 R/M IS FOR THE COOLER.

QUANTITY: 1

Learn More

P-4920 SSM DP3 C DIGICONE PRECIFLEX AIR COVERING YEAR 2012 40 POSITIONS

SSM
TYPE: DP3 C DIGICONE PRECIFLEX
AIR COVERING
YEAR: 2012
MECHANICAL SPEED UP TO 1200m/min
PACKAGE SHAPE PROGRAMMABLE THIS MOMENT
LENGTH: 2900mm
JET HEBERLEIN
40 POSITIONS
SUPERIOR CREEL FOR BOBBINS
INDIVIDUALLY CONTROLLED ELECTRONIC SINGLE DRIVES
INSTALLED POWER 500W FOR SPINDLE
AIR COVERING 6 BARS TO 10 BARS OF THE JET
ALL POSITIONS RUNNING

QUANTITY: 1

Learn More

L-1184 SSM AIR COVERING DP3 C DIGICONE PRECIFLEX YEAR 2012

BRAND: SSM
MODEL: DP3 C DIGICONE PRECIFLEX
YEAR: 2012
MECHANICAL SPEED UP TO 1200 M/MIN
PACKAGE SHAPE PROGRAMMABLE (RIGHT NOW AT 290m)
JET HEBERLAIN
N. 40 POSITIONS
SUPERIOR CREEL FOR BOBBINS
INDIVIDUALLY CONTROLLED ELECTRONIC SINGLE DRIVES
INSTALLED POWER: 500 W FOR SPINDLE
AIR COVERING 6 BAR TO 10 BAR OF THE JET
ALL POSITONS RUNNING

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-0461 COMPLETE COMBED COTTON RING SPINNING MILL -10,560 SPINDLES -YEAR 1993 QUANTITY AVIAILABLE: 1 Learn More

P-4706 TOYODA FL-100 ROVING FRAMES YEAR 1997 96 and 120 SPINDLES

TOYODA
MODEL: FL-100
ROVING FRAMES
YEAR: 1997
2 SETS WIITH 96 SPINDLES
2 SETS WITH 120 SPINDLES
STAFF (4 SPINDLES); 440mm
FULL BOBBIN DIAMETER: 152mm
LIFT: 406mm
EASY DOFFING DEVICE
DRAFTING SYSTEM: 4-ROLLER DOUBLE APRON D-TYPE
FOR 100% COTTON, COMBED OR CARDED
PROCESSING FIBRE UP TO 38mm, Ne 10-20s
WEIGHTING ARM: SKF-PK1500-001938
SHORT BOTTOM APRON
CRADLE TYPE: SKF OH 514-110
CCRADLE RADIUS: 34.5mm, WIDTH: 40mm
BOTTOM ROLLER = 28.5 (F) x 28.5 (S) x 28.5 (T) x 28.5 (B)
TOP ROLLER SKF
LP 315-110 (F) x LP 315-110 (S) x LP 317-110 (T) x LP 315-110 (B)
DIAMETER OF FLYER SPINDLE, 22mm
LIGHT ALLOW METAL FLYER, SL REINFORCED, SLIT LESS TYPE (FL 100)
SIZE OF FEEDING CAN: 508mm (20 INCHES) x 1321mm (52INCHES) SIZE
SINGLE SILVER FEEDING TYPE
INDICATOR: 3 SHIFTS
CLEARER: POSITIVE INTERMITTENT ROVING CLEARER WITH COMB FOR TOP AND BOTTOM ROLLERS
ELECTRIC CUSHION STARTER CONTROL FOR RUN AND INCHING
AUTOMATIC LUBRICATION FOR FLYER AND BOBBIN GEAR
MACHINE BACK COVER WITH BOBBIN JUMP PREVENTION DEVICE
VOLTAGE: AC 220/60Hz

SPECIAL OPTIONS INCLUDED ARE:
ROVING TENSION CONTROLLER
FLYER SPEED CONTROL BY INVERTOR
MAIN GEARING IN OIL BATH
DRAFT GEARING GREASE
IRREGULAR ROVING [REVENTING DEVICE
PACKAGE SHOULDER COLLAPSE PREVENTING DEVICE
STOP MOTION UPON LENGTH MEASURED SETTING COMPLETION

QUANTITY: 4 SETS

Learn More

REFERENCE NUMBER: M-5373 (220RJAMHH1) L OPEN END SPINNING PLANT OPENER – CARDS (2) X RIETER UNIFLOC A1/2 BALE PLUCKER YEAR 1988 (12) X RIETER C4 CARDS YEAR 1988 (12) X RIETER AEROFEED TYPE U CHUTE FEED YEAR 1988 (3) X RIETER UNIMIX B-7/3R MIXER YEAR 1997 (1) X RIETER UNIMIX B-7/3R MIXER YEAR 2000 (1) X RIETER UNIMIX B-7/3R MIXER YEAR 1988 (1) X RIETER UNIMIX B-7/3 MIXER YEAR 1997 (2) X RIETER B-3/3R MIXER-OPENER YEAR 1988 (1) X RIETER B-1 OPENER YEAR 1988 (1) X RIETER B-50 OPENER YEAR 1988 (2) X RIETER B-50 OPENER YEAR 1997 (1) X RIETER ERM-B5/5 OPENER YEAR 1988 (1) X RIETER MONOCYLINDER B 4/1 OPENER YEAR 1988 (1) X RIETER UNIBLEND A80 (3 CHAMBERS) YEAR 1997 (1) X RIETER UNIBLEND A80 (2 CHAMBERS) YEAR 1997 (2) X RIETER UNISTORE A77 YEAR 1997 (1) X RIETER B-2/5 WASTE OPENER YEAR 1988 (1) X TRUTZSCHLER ABGANGOFFNER WASTE OPENER YEAR 1979 (1) X OMMI BLENDER YEAR 1998 DRAW FRAMES (2) X RIETER D1/2 DRAW FRAMES YEAR 1988 ROTOR SPINNING FRAMES (2) X SCHLAFHORST ACO-288 (SE-10) AUTOCORO (240 ROTORS) YEAR 1997 (3) X SCHLAFHORST-SUSSEN ACO-240 (SE-08/SC1-M) AUTOCORO (216 ROTORS) YEAR 1998-1995 (1) X SCHLAFHORST ACO-240 (SE-08) AUTOCORO (216 ROTORS) YEAR 1988 (4) X RIETER R-20 OPEN END (240 ROTORS) YEAR 1997 (4) X RIETER R-20 OPEN END (280 ROTORS) YEAR 1997 MISCELLANEOUS (1) X C+M WASTE PRESS YEAR 2001 (1) X SAN GRATO KALIE V3 PACKING MACHINE YEAR 1988 (1) X ITIPAC VKC/F-O WRAPPING MACHINE YEAR 1995 (1) X DALMEC BOX LIFT (1) X SAN GRATO PELLICANO PACKING MACHINE YEAR 1997 (1) X ITIPAC VKC/F-O WRAPPING MACHINE YEAR 1995 (1) X DALMEC BOX LIFT (1) X LUWA WASTE PRESS (1) X LAROCHE WASTE OPENER (3) X RIETER CONDENSER INFORMATION – DETAILS A. SE-10 AUTOCORO SCHLAFHORST OPEN-END YEAR 1997 MODEL ACO 288 TYPE SRK 240 POSITIONS NOZZLE KN 4 ROTORS T 231 BD YARN PRESENCE DEVICE EXIT CONICAL 4°20 6” TRAVERSE CLEARERS BARCO COROLAB 7 SPINNING BOX SE-10 01 SHUTTLE FOR 240 SPINDLES 02 ASW PIECERS WITH INTERNAL RESERVE WITH WAXING DEVICE BIG BELT FOR WASTE REMOVAL CONE DELIVERY WITH TWO BELTS 2 MAIN MOTOR DRIVEN BY FREQUENCY INVERTER VOLTAGE 380.3.50HZ COMBING ROLLER B 174 WITH ELECTRONIC YARN BREAK DETECTOR B. (4) X AUTOCORO SCHLAFHORST OPEN-END SPINNING MACHINES YEAR 1988/1997 MODEL ACO 240/SC1-M (3 MACHINES), ACO 240 SE08 (1 MACHINE) TYPE SRK 216 POSITIONS FEEDING CANS 500mm x 1160mm WITHOUT WHEELS NOZZLE KN4 ROTORS T 231 BD (1 MACHINE), T 236 BD (1), T 233 BD (1), T 33 (1) EXIT CONICAL 4°20 6” TRAVERSE CLEARERS USTER UPG4 SPINNING BOX THREE MACHINES SC1-M, ONE MACHINE SE08 1 SHUTTLE FOR 216 SPINDLES ONE MACHINE WITH 2 ASW PIECERS, THREE MACHINES WITH 1 ASW PIECER WITH INTERNAL RESERVE WITH WAXING DEVICE BIG BELT FOR THE WASTE REMOVAL CONE DELIVERY WITH TWO BELTS VOLTAGE 380.3.50HZ COMBING ROLLER B174 C. (12) X C4 RIETER CARDING MACHINES YEAR 1988 FEEDING BY CHUTE FEED AEROFEED U WORKING WIDTH 1000mm CARD CLOTHING FOR COTTON REVOLVING FLATS CENTRALIZED WASTE COLLECTION INTERMITTENT FIX FLATS IN ENTRY AND EXIT RIETER AUTOLEVELLER 1850-582 DIGITAL METER COUNTER IN METER MODEL DZ1 COILERS SIZE 1100mm x 1200mm DOFFER DRIVEN BY FREQUENCY INVERTER SAFETY COVERS FOR THE OPERATORS VOLTAGE 380.3.50HZ STATUS: STOPPED QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5320 (220AFWYXX1) L TRUTZSCHLER BLOW ROOM, CARDS, AND DRAWING FRAMES YEAR 2006-2008 (1) X TRUTZSCHLER BLENDOMAT BO-A 2300 AUTOMATIC BALE OPENER, WORKING WIDTH 2.3M (6) X TRUTZSCHLER BR-EU EXTENSION UNIT (1) X TRUTZSCHLER BR-FD500 FAN (1) X TRUTZSCHLER BR-COU CONDENSER (1) X TRUTZSCHLER SP-ICH BUILT IN HEAVY PARTICLE SEPARATOR (1) X TRUTZSCHLER SP-EM ELECTRONIC METAL SEPARATOR (1) X TRUTZSCHLER BR-2W 2-WAY DISTRIBUTOR (1) X TRUTZSCHLER BR-F425 FAN (1) X TRUTZSCHLER MX-16 MULTI MIXER (1) X TRUTZSCHLER BR-WS SERVICING AREA (1) X TRUTZSCHLER CLEANOMAT CL-C4 CLEANER (1) X TRUTZSCHLER BR-MC MANUAL FEEDER (1) X TRUTZSCHLER BR-FD425 FAN (1) X TRUTZSCHLER SP-F FOREIGN PART SEPARATOR (1) X TRUTZSCHLER BR-FD425 FAN (1) X TRUTZSCHLER BR-COU CONDESNOR (1) X TRUTZSCHLER BR-TD T-DISTRIBUTOR (1) X TRUTZSCHLER LC-12 INSTALLATION CONTROL (1) X TRUTZSCHLER BR-WC WASTE COLLECTOR (1) X TRUTZSCHLER BR-R1 DUCT CARDING DRAWING SPARE PARTS WESSNER AIR CONDITIONING PLANT MADE IN GERMANY Learn More

INVENTORY NUMBER: E-6016 TRUTZSCHLER PREPARATION LINE FOR COTTON FIBERS YEAR 2003 FOR SALE AS A COMPLETE PLANT ONLY TRUTZSCHLER COTTON PROCESSING MACHINE, C/O, MODEL SC 1552002 QUANTITY AVAILABLE: 1 Learn More