Search results for: 'filling ca'

MODEL 1600-H2Y-1360-1710-C7H SPECIFICATION 1.MIXING BOX: 1400 X 1200 X 2200mm 2.FOAM GRINDER: 2500 X 680 X 860mm 3.FIBER OPENER (1710-A7H): 2200 X 1080 X 1070mm VOLTAGE 220 VOLTS 60Hz POWER 0.75 X 2+5.5+4 +2.2 X 3 KW = 16.2 OUTPUT 100 TO 300 KG/H MIX PERCENTAGE ABOVE 98% LABOR 3 PERSONS WEIGHT 1530 KG LABOR 3 PERSONS WEIGHT 1530KG MACHINE DETAILS ONE FOAM SHREDDING MACHINE , ONE FIBER OPENING MACHINE, ONE FEEDING MACHINE, ONE MIXING BOX, TWO FIBER OR FOAM STUFFING NOZZLES (WITH FANS) STATIONS PRODUCT INTRODUCTION :  THIS MACHINE IS A NEW MACHINE TO FILL PILLOWS, CUSHIONED SOFA SECTIONS, ETC.  ITS GREAT ADVANTAGE IS THAT IT WILL NOT PRODUCE GRANULES AND BALL GRAINS WHEN MIXING CELLUCOTTON AND FOAM, PRODUCING A PRODUCT THAT FILLS WITH EXCELLENT ELASTICITY AND A SMOOTH SURFACE (FOR PILLOWS, A SMOOTH SURFACE IS ESPECIALLY IMPORTANT.)  MAIN FUNCTION : IT CONSISTS OF A FOAM SHREDDER, A FIBER OPENER, A MIXING STATION AND TWO FILLING NOZZLES. BY SIMPLY PUTTING THE FOAM (INCLUDING SCRAP ),RAW COTTON (NON-CARDED AND CELLUCOTTON) INTO THE MACHINE, IT WILL AUTOMATICALLY OPEN THE CELLUCOTTON AND SHRED THE FOAM. THE DOSAGE RATIO OF EACH RAW MATERIAL CAN BE ADJUSTED OPTIONALLY, EVENLY MIX THEM AND THEN FILL INTO THE PRODUCT. QUANTITY: 1 Learn More

PROVIDED WITH A BRAKING SYSTEM WHICH PERMITS THE FILLING OF WADDED PILLOWS AND QUILTS WITH ALL MATERIALS (POLYESTER, FEATHER, EXPANDED POLYURETHANE, COTTON, WOOL, ETC.) USING THE SPECIAL TUBE IT IS POSSIBLE TO SUCK UP THE MATERIAL DIRECTLY FROM THE VARIOUS CONTAINERS. THE BRAKING IS VERY RAPID (ABOUT 1/10 OF SECOND) AND DOES NOT REQUIRE MAINTENANCE SINCE IT IS OBTAINED THROUGH A PNEUMATIC DEVICE. IT CAN BE SUPPLIED BOTH IN A ONE-PHASE AND IN A THREE-PHASE VERSION. THE MACHINE IS CONSTRUCTED IN CONFORMITY WITH THE EEC DIRECTIVES 2006/42/CE, 2004/108/CE E 2006/95/CE AND SUCCESSIVE MODIFICATIONS AND MARKED CE. ON REQUEST WITH SPEED VARIATION (VERSION R 3PV) Learn More

INVENTORY NUMBER: E-4401 NEW PILLOW FILLING MACHINES (2 NOZZLE) FOR SALE: MODEL: 1013 (PICTURES AVAILABLE) FOR POLYESTER STAPLE FIBER OPENING AND FILLING INTO UPHOLSTERY CUSHIONS OR PILLOWS. WITH A MIXING CHAMBER IN WHICH THE UPHOLSTERY MANUFACTURER CAN ADD OTHER MATERIALS, SUCH AS FOAM PIECES, FEATHERS, WOOL FIBERS INTO THE PILLOWS OR CUSHIONS DURING FILLING. MODEL 1013 TECHNICAL DESCRIPTION: WIDTH OF THE FINE OPENER: 560 MM (CYLINDER WIDTH) DRUM DIAMETER OF THE FINE OPENER: BIG CYLINDER: 320 MM (1 PCS) SMALL CYLINDER: 56MM (9 PCS) PRINCIPLE OF FILLING UNIT: BLOWING FLOOR SPACE REQUIRED: ABOUT 9.5 SQUARE METERS TOTAL INSTALLED POWER: 13.95 KW AIR CONSUMPTION: <0.5 MPA (FOR EACH FILLING) ELECTRONIC COMPONENTS- MAKE AND TYPE: ALL THE ELECTRONIC COMPONETS ARE SCHNEIDER (BRAND) CAPACITY: 120-150KG/HOUR FIBER OPENER 1001-560 BELT WIDTH: 560 MM DIMENSIONS (MM) (LXWXH): 2050 X 900 X 940 POWER: 4.75 KW NET WEIGHT: 600 KG CAPACITY: 120 - 150 KG/HR VOLTAGE: AS PER CUSTOMER TRANSFER FAN 503 DIMENSIONS (MM) (LXWXH): 610 X 520 X 800 POWER: 2.2 KW NET WEIGHT: 75 KG CAPACITY: 120 - 150 KG/HR VOLTAGE: AS PER CUSTOMER MIXING MACHINE 1003-B DIMENSIONS (MM) (LXWXH): 1840 X 1100 X 1680 POWER: 4 KW NET WEIGHT: 400 KG CAPACITY: 120 - 150 KG/HR VOLTAGE: AS PER CUSTOMER FILLING STATION (FAN) 502 DIMENSIONS (MM) (LXWXH): 850 X 540 X 960 POWER: 1.5 KW NET WEIGHT: 70 KG CAPACITY: 120 - 150 KG/HR VOLTAGE: AS PER CUSTOMER AIR PRESSURE: <0.5 MPA MODEL 1013: (4 COMPONENTS) A) FIBER OPENER: B) TRANSFER FAN: C) MIXING CHAMBER: D) FILLING STATION (FAN): E) SECOND FILLING STATION: Learn More

REFERENCE NUMBER: L-2926
1 X FIBER CARDING MACHINE
MODEL: 1001-560
1 X FIBER FEEDING MACHINE
MODEL: 503
1 X MIXING MACHINE
MODEL: 1003-B
2 X FILLING MACHINES
MODEL: 502
QUANTITY: 1 SET
FOAM SHREDDER
MODEL: 205
QUANTITY: 1

Learn More

2 WEIGHTING UNITS 1 COMPUTER CONTROL 1 FEEDING VENTILATOR 1 PANEL FOR THE OPERATOR FOR WEIGHT ADJUSTMENT SCALE 1 AND SCALE 2 1 FILLING TABLE (CAN BE REDUCED IN SIZE), SUITABLE FOR DUVETS OF UP TO 2400 X 2600 MM APPROX., SLEEPING BAGS DUVET JACKETS ETC PIPING Learn More

REFERENCE NUMBER: G-8444 PUNCHING MACHINE MODEL FST 11 MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: L-1760
FOR PUNCHING HOLES IN PU FOAM
WORKING WIDTH: 2100mm
QUANTITY: 1

Learn More

INVENTORY NUMBER: E-4400 QUILTED FOAM WASTE REPROCESSING MACHINE THIS MACHINE IS SUITABLE FOR FOAM WASTE REPROCESSING OR FOAM RECYCLING QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-3236 QUILTED FOAM WASTE REPROCESSING MACHINE (NEW) THIS MACHINE IS SUITABLE FOR FOAM WASTE REPROCESSING OR FOAM RECYCLING. THE MACHINE'S CUTTING TOOLS ARE IMPORTED FROM GERMANY. THE MACHINE CAN CUT THE FOAM INTO REGULAR PIECES AND WITHOUT PRODUCING WASTE POWDER AND CAN ALSO CUT QUILTED FOAM FABRIC WASTE; FOR EXAMPLE MATTRESS TICKING WITH FIBERFILL AND NONWOVEN-BACKING. ORDINARILY QUILTED FABRIC WASTE CANNOT BE REUSED BUT WITH OUR QUILTED FABRIC WASTE AND FOAM CUTTING MACHINE, THE MANUFACTURER CAN RECLAIM THIS WASTE. BY CUTTING THE QUILTED FABRIC WASTE IT IS TRANSFORMED INTO LITTLE PIECES, AND IT CAN BE USED AS FILLING MATERIAL FOR PILLOWS, CUSHIONS, ETC. QUANTITY AVAILABLE: 1 Learn More