Search results for: 'compression'

L-6683 DOUBLE BELT COMPRESSION THERMOBONDING OVEN SYSTEM 6000mm X 3300mm WIDE

INCLUDING:

THERMOBONDING OVEN
- DOUBLE COMPRESSION CONVEYORS SYSTEM SINGLE PASS
- DOUBLE BELT SOFT & HARD WADDING OVEN (6000mm LONG)
WORKING WIDTH: 3300mm
LENGTH OF HEATING CHAMBER: 6000mm
PANELS ARE 100mm THICK
TEMPERATURE INSIDE: UP TO 220 C
GAS BURNER 25 CUBIC METER PER HOUR DEPENDING ON MATERIAL THICKNESS
TWO GAS BURNERS ONE ON EACH SIDE 80 START AND 25 RUN CBM/H WITH MAINLINE 2 INCH
REDUCED TO 1” AT BURNER, PRESSURE 10 TO 15 KPascal
TWO HOT AIR FANS 22 KW EACH
ONE EXHAUST FAN 5.5 KW
WORKING SPEED: 1 TO 8 METERS PER MINUTE
DOUBLE TEFLON BELT WITH SINGLE PASS, WEAVE IS 2mm X 2mm
SUCTION HOOD AT THE ENTRANCE
THICKNESS OF FINAL PRODUCT 20 TO 150mm DEPENDING

COOLING UNIT
- FOUR COOLING PRESS ROLLERS 200mm diameter , 10mm shell thickness, with chiller
12,000 watt output power , input power 5700 watt , capacity 65 liter per minute
WORKING WIDTH: 3300mm
- LENGTHWISE CUTTER – 7 KNIVES ,pneumatically activated , BLADE DIAMETER 650mm
-SINGLE MOTOR
- MOVABLE SIDEWAYS
- CROSS CUTTER 2.2 KW MOTOR . UP TO 4 CUTS PER MINUTE
MAXIMUM LENGTH 2000mm
WORKING WIDTH: 2800mm
PVC CONVEYOR AT THE EXIT

ELECTRICAL CONTROL SYSTEM
-ELECTRICAL CABINET UL COMPONENTS

QUANTITY: 1

Learn More

V-1360 SANTEX THERMOBONDING COMPRESSION OVEN FOR NONWOVENS ON ROLL, 80 TO 400 G/M, YEAR 1986

WORKING WIDTH: 2500mm
ROLL FACE WIDTH: WORKING WIDTH + 50mm
MATERIAL FIBERS: NONWOVEN WEB OF POLYESTER OR DIFFERENT FIBERS MIXED WITH 10 TO 25% POLYESTER BI-COMPONENT BINDER FIBERS OR DIFFERENT BINDER FIBERS
MACHINE SPEED: 1 TO 20 M/MIN. (OTHERS UPON REQUEST)
COMPOSITION OVEN: 2 HEATING ZONES OF 2 M EACH + 1 COOLING SECTION

QUANTITY: 1

Learn More

REFERENCE NUMBER: L-1502
MODEL: UE2410
QUANTITY: 1

Learn More

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

Learn More

H-1134 FIBERFILL LOW MELT THERMOBONDING LINE, WORKING WIDTH 2800mm

DETAILS:
CAN DO LIGHT WEIGHT AND CONDENSED WEIGHTS FOR MATTRESSES
WORKING WIDTH: APPROX. 110”/2800mm

THE LINE CONSISTS OF THE FOLLOWING:
OFFER 001
AZTEC 2 BURNER GAS COMPRESSION OVEN
MEASURING 130” W X 25' L
WITH TOP AND BOTTOM COMPRESSION BELTS
QUANTITY: 1

OFFER 002
COOLING CHAMBER

OFFER 003
HUNTER 60” SINGLE SECTION GARNETS

OFFER 004
CAMELBACK LAPPERS

OFFER 005
CROSS LAPPER

OFFER 006
FLOOR APRON

OFFER 007
BLEND LINE
WITH (6) 60” HOPPERS
WITH ALUMINUM WEIGH PANS, BLENDER AND CONVEYOR

OFFER 008
60” CLAW TOOTH PICKER

OFFER 009
130” HIGH SPEED SLITTER
WITH 11 CIRCULAR KNIVES

OFFER 010
130” WIND UP
ALL CONTROLS, MOTORS, DRIVES, PLATFORMS, ETC.

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: C-1159 SPINNBAU NON WOVEN CARDING MACHINE, YEAR 1989, WIDTH 3000MM QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: J-2912 SANTEX THERMOBONDING OVEN FOR HIGH DENSITY NONWOVENS, WORKING WIDTH 2600mm -CURRENTLY PROCESSING VIRGIN AND RECYCLED PET MAKE: SANTEX FOR PROCESSING HIGH DENSITY NONWOVENS FOR AUTOMOTIVE INDUSTRY, SOUND ABSORBENT MATERIALS, BEDDING AND FURNITURE WADDING YEAR: 1996 (PERMANENTLY OVERHAULED SO IN GOOD CONDITION) WORKING WIDTH: 2500mm (WEB WIDTH) CAPACITY: 100 TO 4000 gr/m2 WITH MODIFICATIONS TO ALLOW PROCESSING OF 4000 gr/m2 TO 25mm HEIGHT, INLET HEIGHT 5 TO 100mm WITH DOUBLE COMPRESSION GLASS-FIBER BELT GAS HEATED, SINGLE BURNER COOLING ZONE FLOORSPACE REQUIRED (FOR FULLY ERECTED OVEN) APPROXIMATE LENGTH: 9000mm + 3000mm INTAKE TRANSPORT BAND WIDTH: 5500mm HEIGHT: 3500mm + SPACE FOR FANS AND PIPING HEATING CHAMBER LENGTH: APPROXIMATELY 5000mm BURNER BTU (OR KILOCALORIES): INFORMATION COMING SOON IT IS POSSIBLE TO FEED THE OVEN WITH THE WEB WIDTH OF 2600mm, WHICH WILL ALLOW FOR THE TRIMMED WIDTH OF 2500mm AND TAKING OUT TWO PANELS EACH OF 1220mm FROM THIS STATUS: CURRENTLY RUNNING AND POSSIBLE TO SEE UNTIL END OF JUNE, 2020 QUANTITY: 1 Learn More

REFERENCE NUMBER: F-1234 NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 4500mm QUANTITY: ONE PRODUCTION LINE Learn More

REFERENCE NUMBER: M-3471 (880OKRSHH7) L NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 4500mm TECHNICAL DATA: RAW MATERIALS: NYLON, POLYESTER, POLYPROPYLENE, GLASS FIBER, ETC. FINENESS OF FIBER: 2.5 TO 10DENIER LENGTH OF FIBER: 38 TO 76mm MIXING RATIO BETWEEN TWO FIBERS: 20 TO 100% SPEED: 6m/min (PER 2.5-6D× 38-51mm) MAX. 5000 KG/DAY (PER 22 HOURS/DAY) RANGE OF GRAM WEIGHT: 100 TO 250g/m2 CARDING MACHINE FEATURES ARE ACCORDING GRAM WEIGHT: 250G/M², 300G/M² PROCESS FLOW CHART: BALE OPENER---PER-OPENER—FINE OPENER--FEEDER---CARDING MACHINE-- CROSSLAPPER--TRANSIT APRON---HIGH-SPEED PRE-NEEDLE LOOM---(2) HIGH-SPEED MAIN NEEDLE LOOM--CALENDER---CUTTER AND REWINDER QUANTITY AVAILABLE: 1 Learn More