Search results for: '100% R'

R-1701 SEYDEL 710 REBREAKER, DIAMETER 1000 X 1200, YEAR 2002

SEYDEL 710 REBREAKER
YEAR: 2002
24 INPUT-1 DELIVERY CAN
DIAMETER: 1000 X 1200
4 MANSON

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-2099 ROLAND RSU-6 YEAR 1977 6 COLORS 100x140 5 COLORS OFFSET+COATING IN THE 6TH UNIT ROLAND TYPE: RSU-6 YEAR: 1977 6 COLORS 100x140 5 COLORS OFFSET+COATING IN THE 6TH UNIT TGC COLOR ALCOHOL DAMPING IR DRYER POWDER SPRAY EXTENDED DELIVERY QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3137 (770756UF) ZINSER RM 350 SPINNING FRAMES YEAR 1996 - 1008 SPINDLES - 42mm RING ZINSER RM 350 YEAR 1996 1008 SPINDLES 70mm GAUGE 42mm DIA P3-1 DRAFTING WITH AUTODOFFING WITH BLOWER 21cm TUBE LENGTH WITH INVERTER SYSTEM STOP POSITION QUANTITY AVAILABLE: 5 SETS Learn More

REFERENCE NUMBER: M-4598 (1111SGYXX10) J MARZOLI RST1 RINGFRAMES YEAR 2003 – WITH 1008 SPINDLES – RING 40mm YEAR: 2003 NUMBER OF SPINDLES: 1008 SPINDLE GAUGE: 70mm RING TUBE LENGTH: 210mm DRAFTING: SKF PK 2025 CRADLE: SHORT RING DIAMETER: 40mm OHTC: ELECTROJET CREEL: 6 DOFFER: AUTO BOBBIN CONVEYING: PEG TRAY Learn More

REFERENCE NUMBER: M-4512 (1111PKYLXX10) D ZINSER 321E COTTON RING FRAMES 1993 WITH 1004 SPINDLES YEAR: 1993 1004 SPINDLES GAUGE: 75MM RING DIAMETER: 48MM TUBE LENGTH: 240MM PK DRAFTING ARM QUANTITY AVAILABLE: 3 Learn More

TT-3639 BAG MANUFACTURER MACHINE TO PRODUCE ECO FRIENDLY PAPERBAGS THAT ARE MAINLY USED IN BAKERIES, PHARMACIES, FASTFOOD AND RESTAURANTS – NEW, WIDTH 1000mm, YEAR 2023 BAG MANUFACTURER MACHINE TO PRODUCE ECO FRIENDLY PAPERBAGS THAT ARE MAINLY USED IN BAKERIES, PHARMACIES, FASTFOOD AND RESTAURANTS NEW YEAR: 2023 Learn More

TT-1735 ASHESAPPHIRE100/50 SLITTER REWINDER, WIDTH 1000mm, YEAR 1998 ASHESAPPHIRE100/50 SLITTER REWINDER YEAR 1998 CE COMPLIANT VERY GOOD CONDITION QUANTITY: 1 Learn More

C-2932 TOYOTA RX 240 RING FRAME WITH 1008 SPINDLES, TUBE LENGTH 210mm, YEAR 1996

TOYOTA RING FRAME
MODEL: RX 240
YEAR: 1996
NO OF SPINDLES: 1008
GAUGE: 70mm
CRADLE: SHORT
TOPARMS: SKF PK 2025
SUCTION: FLUTE TYPE PNEUMAFILL
DOFFER: AUTOMATIC
TOP ROLLER CLEARER: AVAILABLE
CREEL: 5 ROW
OHTC: ELECTROJET
WHARVE DIAMETER: 18.5mm
TUBE LENGTH: 210mm
MAIN MOTOR: 45 KW

QUANTITY: 1

Learn More

M-7402 VARIOUS FORMS OF CACAO

 

ITEM	DESCRIPTION	CHARACTERISTICS
1	COCOA BUTTER	MADE FROM RAW COCOA, UTZ STANDARD. USED IN THE BEAUTY INDUSTRY: ANTIOXIDANT, SKIN (LIPID 99.6%)
2	PURE COCOA POWDER	MADE FROM 100% DRIED FERMENTED COCOA BEANS, BUTTER SEPARATES, SPECIAL FLAVOR, UTZ STANDARD (LIPID 17.6%)
3	COCOA POWDER 1.2	MADE FROM 100% FERMENTED COCOA BEANS, BASED ON UTZ STANDARDS. (LIPID 13.6%)
4	CACAO MASS	MADE FROM RAW COCOA, UTZ STANDARD, USED AS RAW MATERIALS IN THE FOOD INDUSTRY, SUCH AS PRODUCTION OF CHOCOLATE, CHOCOLATE COVERED CAKE
5	COCOA NIBS	MADE FROM 100% FERMENTED COCOA BEANS, BASED ON UTZ STANDARDS. DRINKING DIRECTLY OR USED AS MATERIALS IN THE FOOD INDUSTRY
6	DRIED COCOA BEANS	100% DRIED FERMENTED COCOA BEANS, UTZ STANDARDS
7	ROASTED COCOA BEANS	MADE FROM 100% DRIED FERMENTED COCOA BEANS AND ROASTED, UTZ STANDARDS
8	ROASTED COCOA BEANS WITHOUT SHELLS	MADE FROM 100% DRIED FERMENTED COCOA BEANS AND ROASTED, UTZ STANDARDS

Learn More

REFERENCE NUMBER: M-1480

SLITTER REWINDER 1800mm WIDTH AND 1000mm DIAMETER-NEW MACHINE

 

TECHNICAL CHARACTERISTICS:

 

UNWINDER

MAXIMUM WIDTH: 1800mm

MAXIMUM DIAMETER: 1100mm

MINIMUM WIDTH: 420mm

MAXIMUM WEIGHT: 300kgs

CORE ID: 3”

 

REWINDER:

MAXIMUM WIDTH: 1800mm

MAXIMUM DIAMETER: 1000mm

MINIMUM WIDTH: 100mm

MAXIMUM WEIGHT PER SHAFT: 300kgs

CORE ID: 3”

 

MATERIAL:

TYPE: 100% PP NONWOVEN

MINIMUM: 10gsm

MAXIMUM: 150gsm

 

TENSION:

MAXIMUM: 2 PLI

 

SPEED:

METERS PER MINUTE: 250

 

DESCRIPTION:

REWINDER MACHINE FOR NONWOVEN ROLLS: UP TO 1000 mm DIAMETER AT UNWINDER AND 1200 mm AT REWINDER.

THE WORKSTATION OFFERS EASY ACCESS TO THE TENSION CONTROL AREA AS WELL AS THE TRIMMING AREA; THIS WAY, ANY MODIFICATION ON THE MATERIAL MEASUREMENTS CAN BE DONE SAFELY.

THE WORKSTATION WILL DELIVER MODULES OF ROLLED MATERIAL WITH SPECIFIC DENSITY, AND SEPARATED FROM EACH OTHER IN ORDER TO KEEP OPERATION CONDITIONS WITHIN REQUIRED QUALITY CONTROLS.

 

UNWINDER WITH SHAFT:

THERE IS A CENTRAL UNWINDING SYSTEM SUPPORTED BY A 3” STEEL EXPANSION SHAFT.

THERE IS A TENSION CONTROL SYSTEM THAT WORKS THROUGH A PNEUMATIC DISK BRAKE WITH A REPLACEABLE PADS SYSTEM.

THE UNWINDER HAS A PIVOTABLE ROLLER SYSTEM WHEREBY TENSION MAY BE MODIFIED ON ONE END TO REDUCE TENSION DIFFERENCE ON MATERIAL IF NECESSARY.

THE SAFETY CHUCK HAS A MECHANICAL MOVEMENT SYSTEM FOR SHAFT INSERTION.

THE UNWINDER HAS AN ULTRASONIC OR LASER SENSOR FOR A REAL MEASURING OF ROLL DIAMETER. THIS INFORMATION WILL HELP TO KEEP A SPECIFIC TENSION ON MATERIAL DURING ALL THE PROCESS.

 

CUTTING:

THE LONGITUDINAL SHEAR CUT SYSTEM GUARANTEES CLEAN AND SAFE TRIMMING AT EVERY MODULE. THE CUTTING SYSTEM ADAPTED TO THE MAIN TRANSMISSION GUARANTEES AN OVER SPEED THAT MAY BE REGULATED ACCORDING TO THE MATERIAL DURING EVERY STAGE OF PROCESS. THE PNEUMATIC ACTIVATION KNIVES WILL ALLOW A FAST MODIFICATION OF THE CUTTING MEASUREMENTS.

THIS ROLLER IS LOCATED AT AN EASY ACCESS AREA FOR THE OPERATOR TO BE ABLE TO MAKE CHANGES ON THE CUTTING WIDTH SAFELY. THE COUNTER KNIVES ARE ASSEMBLED TO THE ROLLER BY 3 SETSCREWS THAT FIX THEIR POSITION ON THE ROLLER. THE COUNTERKNIVES HAVE TWO FACES, SO WHEN THE FIRST FACE HAS AN IMPORTANT WEAR, IT WILL BE REMOVED FROM THE ROLLER AND THE NEW FACE WILL BE PLACED INSTEAD. THIS WILL EXTEND THE LIFESPAN OF THIS IMPORTANT COMPONENT.

SHEAR CUT KNIVES: THERE IS AN ADJUSTMENT MECHANISM TO PLACE THEM ON THE COUNTER KNIFE AND TO ADJUST THE CUTTING LOAD ACCURATELY. THE COUNTER KNIVES ARE SUPPORTED TOWARDS THE ROLLER IN ORDER TO OBTAIN A CUTOFF. THE SPEED ON THIS SYSTEM IS AN OVER SPEED IN RELATION TO THAT OF THE MATERIAL, IN ORDER TO GENERATE A CLEAN CUT.

LONGITUDINAL SHEAR CUT: PNEUMATIC ACTIVATION.

COUNTER KNIVES ROLLER WITH 3 SUPPORT PLANES FOR THE COUNTER KNIVES; 120° DISPLACEMENT FROM EACH OTHER.

19 SLITTERS ARE INCLUDED.

 

REWINDER:

PERIPHERAL REWINDER FOR NONWOVEN. THIS SYSTEM HAS A COUPLE OF MAIN ROLLERS WHERE THE MATERIAL ROLL IS FORMED.

THIS SYSTEM HAS LINEAR GUIDES FOR COMPACTION THROUGH WICH A NIP IS OBTAINED ON THE MATERIAL. THE REWINDER WILL HAVE A TRANSMISSION BASED ON A VECTORIAL-TYPE MOTOR ADAPTED TO A CYCLOIDAL REDUCER. THE TRANSMISSION HAS A MECHANICAL TORQUE CONTROL SYSTEM TO CONTROL THE TORQUE DIFFERENTIAL BETWEEN MAIN ROLLS.

THIS SYSTEM WILL HAVE A 3” EXPANSION SHAFT WHERE THE CARDBOARD CORES WILL BE INSERTED AND THE MATERIAL ROLLS WILL BE FORMED.

 

FABRIC OPENING SYSTEM:

THIS SYSTEM IS BASED ON A VARIABLE CURVATURE SYSTEM BY A CENTER KNOB AND IT IS A BAR- TYPE SYSTEM. THIS KNOB IS THERE TO CONTROL THE CURVATURE OF THE BAR WHERE MATERIAL SLIDES THROUGH. THE SLIDING BAR IS MADE OUT OF AN ULTRA LOW FRICTION MATERIAL IN ORDER TO GENERATE A SMOOTH SLIDING OF MATERIAL WITHOUT ANY TENSION ADDED. THIS WILL REDUCE WRINKLES IN A SIGNIFICANT WAY.

 

AUTOMATIC TENSION SYSTEM:

THERE IS AN OPEN LOOP AUTOMATIC TENSION CONTROL SYSTEM WITH A SENSOR FOR DIAMETER MEASURING. BY THIS SYSTEM, A REAL VALUE OF DIAMETER IS OBTAINED AT THE REWINDER. PRESSURE OF PNEUMATIC BRAKE VARIES DURING PROCESS.

 

MANUAL POSITIONING (OPTIONAL):

THE MANUAL POSITIONING SYSTEM IS BASED ON THE POSITION CONTROL OF THE COUNTER KNIVES. THE MODULE IS POSITIONED AT A DESIRED CUTTING PARAMETER AND THE COUNTER KNIFE WILL PHYSICALLY COME ACROSS IT. THE REAL POSITION OF MODULE WILL BE SHOWN ON A SCREEN THAT OPERATOR WILL BE CONSTANTLY SUPERVISING. THIS SCREEN WILL SHOW THE REAL MEASUREMENTS OF THE CARRIAGE IN RELATION TO THE LAST ONE OR AS AN ABSOLUTE REFERENCE. OPERATOR WILL BE ABLE TO RESET THE MEASUREMENT ONCE THE COUNTER KNIFE IS REPLACED AND WILL REPEAT THIS PROCESS EVERY TIME A COUNTER KNIFE IS POSITIONED.

A DISPLAY WILL SHOW THE DESIRED POSITION IN MILLIMETERS OR INCHES.

THIS SYSTEM CAN SHOW MEASUREMENT IN AN EITHER ABSOLUTE OR INCREASING WAY.

POSITION TOLERANCE: +/- 0.30 mm.

THE POSITIONER IS INSTALLED ON A SUPPORT THAT WILL BE LOCATED ON THE REWINDER BENCHES. THEREFORE, THERE WILL BE AN EASY ACCESS TO SYSTEM AND AN EASY REPETITION OF POSITIONING PROCESS.

 

UNLOADING ROLL TABLE:

A HYDRAULIC PIVOTEABLE TABLE WILL HAVE AS MAIN FUNCTION THE UNLOADING OF FINISHED ROLLS THAT THEN WILL BE LOCATED ON FLOOR LEVEL. THIS SYSTEM WILL EJECT THE ROLL AND THEN IT WILL BE RECEIVED AT THE PIVOTING TABLE FOR AN EFFICIENT UNLOADING.

THE UNLOADING TABLE WILL ALSO WORK AS A PROTECTION FOR THE OPERATOR.

THIS EQUIPMENT WILL HAVE SECURITY CURTAINS AT FRONT TO KEEP OPERATOR FROM ENTERING THE REWINDING AREA. THERE WILL BE AN EMERGENCY STOP BUTTON OR WIRE WHERE OPERATOR WORKS AND WILL ALSO HAVE PHYSICAL PROTECTION WITH SECURITY SWITCHES AT CUTTING AREA.

 

CONTROL:

HMI CENTRAL CONTROL SYSTEM WITH TOUCH SCREEN TO PROGRAM THE OPERATION CYCLE AND ALL THE MATERIAL CHARACTERISTICS. OPERATOR WILL HAVE ACCESS TO ALL OPERATION PARAMETERS IN ORDER TO BE ABLE TO MAKE CHANGES ON THE EQUIPMENT OPERATION CONDITIONS, AND THEREFORE OBTAIN MATERIAL ROLLS WITH SPECIFIC DENSITIES.

TRANSMISSION: VECTORIAL MOTO REDUCER WITH 1000:1 TORQUE.

DIGITAL METER COUNTER WITH DISPLAY AND AUTOMATIC STOP AT DEFINED DISTANCE.

 

DOCUMENTS INCLUDED:

THE MACHINE WILL BE DELIVERED WITH THE FOLLOWING DOCUMENT:

OPERATION MANUAL

MAINTENANCE MANUAL

SAFETY MANUAL

ELECTRIC DIAGRAMS

CONTROL SYSTEM MANUAL

PLC BACKUP

REQUIREMENTS:

ELECTRIC 15 KW, 440 VAC, TRI PHASE.

PNEUMATIC 6 BAR - 60 LTS. / MIN.

 

DUCTS AND WIRING:

DUCTS AND WIRES RUNNING FROM UTILITIES SOURCES TO THE CONTROL PANEL AND FROM THE CONTROL PANEL TO THE MACHINE WILL BE AT CUSTOMER COSTS AND MUST BE DONE ACCORDING TO THE INSTRUCTIONS SHOWN IN OUR DIAGRAMS

 

SIEMENS PLC

Learn More