Search results for: 'Contact++in'

YY-2424 USED NGR REGRANULATION LINE for BOPP FILM, FLUFF, LUMPS, MDO WASTE 900 TO 1000 KG PER H OVERCONSUMPTION: 500 KW OUTPUT: 1000 KGS PER HOUR INTENDED FOR THE FOLLOWING WASTE: OUTPUT; BOPP FILM, FLUFF, LUMPS, MDO WASTE: 900 TO 1000 KG/H; CPP FILM, FLUFF, LUMPS: 900 TO 1000 KG/H; PERFORMANCE IS PROVIDED FOR REFERENCE ONLY. THE CAPACITY OF THE DEVICE DEPENDS ON THE PROPERTIES OF THE MATERIAL, E.G. MOISTURE CONTENT, PRINTING, WEIGHT, MELT INDEX, CONTAMINATION AND DEGREE OF FILTRATION. AVERAGE POWER CONSUMPTION: 500 KW; AVERAGE COOLING WATER DEMAND: 668 L/MIN; AVERAGE FRESH WATER CONSUMPTION: 34 L/H; MAXIMUM COMPRESSED AIR CONSUMPTION: 100 L/MIN. THE VALUES GIVEN ABOVE ARE ONLY REFERENCE VALUES AND MAY DIFFER FROM THE VALUES FINAL VALUES OBTAINED AFTER CALIBRATION OF THE DEVICE. THIS DATA SHOULD NOT BE USED FOR PLANNING. Learn More

TT-1968 GIUDICI TG 30 FA TEXTURIZING MACHINE WITH 84 POSITIONS, YEAR 2002 GIUDICI TG 30 FA TEXTURIZING MACHINE 84 POSITIONS YEAR 2002 DOUBLE OVEN AUTODOFFING BOBBIN 290mm RUNNING CONDITION Learn More

YY-2356 CHAMP DISTILLATE SPRAY GUN SPRAY HEATED MOLTEN DISTILLATE MATERIAL WITH SPEED, ACCURACY AND LOW MAINTENANCE. CHAMP DISTILLATE SPRAY GUN ELIMINATES THE NEED FOR ADDITIVES. CUSTOMER TO PROVIDE COMPRESSED AIR ( 3.5 SCFM AT 80PSI). QUANTITY: 1 Learn More

YY-2333 PNEUMATIC LEVEL CONTROL THE PNEUMATIC LEVEL CONTROL IS USED TO DETECT ADHESIVE LEVEL IN RESERVOIR AND TO PROVIDE A SIGNAL TO OPERATE THE FILL PUMP AND MAINTAIN A CONSTANT LEVEL IN RESERVOIR (+/- 1/8"). THE CONTROL UTILIZES AN ALUMINUM TUBE INSERTED INTO THE RESERVOIR AT THE DESIRED FILL LEVEL OF THE ADHESIVE. THE CONTROL DETECTS THE LEVEL PNEUMATICALLY AND INCORPORATES A HIGH LEVEL FAILSAFE FEATURE TO ENSURE AGAINST OVERFILLING OF THE RESERVOIR. THE CONTROL ALSO INCLUDES A TIMING RELAY TO CANCEL OUT INTERMITTENT OR FALSE TRIGGER SIGNALS AND CAN BE USED TO ALLOW A GREATER DROP IN LEVEL UNTIL REFILLING OCCURS. THE OUTPUT OF THE LEVEL CONTROLLER CAN BE CONFIGURED TO GENERATE A VOLTAGE OUTPUT TO OPERATE A SOLENOID, OR A DRY ISOLATED CONTACT OUTPUT TO INTERFACE TO A PUMP CONTROL CIRCUIT. QUANTITY: 1 Learn More

TT-1726 POLYPROPYLENE TAPE LINE EXTRUDER 15 TONS DAILY CAPACITY, 264 WINDERS, YEAR 2012 POLYPROPYLENE TAPE LINE EXTRUDER 15 TONS DAILY CAPACITY CONDITION: USED MODEL: POLYPROPYLENE TAPE LINE EXTRUDER CAPACITY: 15 TONS DAILY CAPACITY YEAR: 2012 QUANTITY: 1 Learn More

T-1652 SGT 400 GAS TURBINE, 50Hz, YEAR 2017, 11 KV, 12.9 MW SGT 400 GAS TURBINE TYPE: STANDARD BRAND: SIEMENS CATEGORY: ENGINES/GENERATORS/MOTORS/TRANSMISSIONS SUBCATEGORY: TURBINE IN STOCK: YES CONDITION: EXCELLENT TYPE: UNUSED SGT-400 GAS TURBINE GENERATOR SET, WITH INTEGRAL LOCAL EQUIPMENT ROOM: UNIT(S) TO BE SUPPLIED ARE UNUSED, WITH ZERO RUNNING HOURS, NEVER INSTALLED THESE UNITS HAVE BEEN STORED INDOORS SINCE MANUFACTURE. QUANTITY: 2 Learn More

YY-2260 AUTOMATIC HIGH SPEED SLITTING REWINDING MACHINE, SLITTING WIDTH 30 TO 1700 mm, WINDING DIAMETER UP TO 1400mm SUITABLE MATERIALS REEL-SHAPED PLASTIC FILMS, LAMINATED FILMS, PAPER, ETC. SPEED: 0 TO 400M/MIN; SLITTING WIDTH: 30 TO 1700mm; UNWINDING DIAMETER: MAXIMUM Ø1400mm; WINDING DIAMETER: Ø610mm; MACHINE WEIGHT: 1800KG; TOTAL MOTOR POWER: 29KW; DIMENSIONS: W 3200 × L 3500 × H 1900 (mm); RETRACTABLE PAPER CORE: 3" (DIAMETER Φ76mm DIAMETER Φ92mm); CORRECTION ACCURACY: ≤ 0.30mm; TENSION SETTING RANGE: 2 ~ 30KG; WINDING MOTOR POWER: 7.5KW X 2; TRACTION MOTOR: 7.5KW; MACHINE COLOR STANDARD WHITE (OR AS REQUIRED). QUANTITY: 1 Learn More

TT-1644 PLASTIC AGGLOMERATOR, WITH CONVEYOR FEED MACHINE TECHNICAL SPECIFICATIONS 1. FEEDING METHOD: BY CONVEYOR BELT 2. BELT WIDTH: 600mm 3. BELT LENGTH: 4500mm 4. MOTOR POWER: 2.2KW 380V 50Hz 3-P (OR 440 VOLTS AVAILABLE) 5. MACHINE TYPE: X800 6. CHAMBER VOLUME: 800LITER 7. CHAMBER MATERIAL: 12mm STAINLESS STEEL 8. CAPACITY: 500KG PER HOUR 9. ROTATING KNIFE: 4 PCS, CAN BE ADJUSTABLE 10. FIXED BLADES: 9 PCS 11. KNIFE LIFE TIME: MORE THAN 1000 TONS AT THE FIRST TIME THEN IT CAN BE RE-SHARPENED TO USE AGAIN. 12. BLADE & KNIFE MATERIAL: 9CRSI 13. ROTARY SPEED: 680 RPM 14. MOTOR POWER: 132KW (OR 440 VOLTS AVAILABLE) 380V-50Hz-3P 15. MOTOR MANUFACTURE: WNF FAMOUS 16. DISCHARGE METHOD: PNEUMATIC 17. ELECTRIC CONTROL CASE: SOLID METAL SHEET. 18. CONTACTORS AND SWITCHES: SIEMENS Learn More

TT-1606 VECOPLAN SHREDDER VAZ 1300-M – NEW, YEAR 2022 VECOPLAN SHREDDER VAZ 1300-M – NEW (IN PLANT - COMPANY DECIDED NOT TO USE IT - AVAILABLE IMMEDIATELY - STILL IN WRAPPER) QUANTITY: 1 Learn More

YY-2215 USED GRANUTECH SATURN MODEL 62-40 HT DUAL SHAFT SHREDDER, CUTTER DIAMETER 20.5" AT HOOKS INLET 55" X 38"; OUTSIDE DIMENSIONS ARE 130" X 61" X 43"; POWER UNIT DIMENSIONS ARE 96" X 86" X 96"; WEIGHT IS 20.000 LBS; POWER UNIT IS 8000 LBS (DRY); CUTTER SHAFT TORQUE: FAST 64.776 FT/LBS, TORQUE: SLOW 78.653 FT/LBS; CUTTER SHAFT SPEED: FAST 22, SPEED: SLOW 18; CUTTER FORCE FAST: 77.732 LBS, SLOW: 94.383 LBS; CUTTER DIAMETER 20.5" AT HOOKS; POWER UNIT OPEN LOOP, SKID MOUNTED; ELECTRICAL POWER 200 HP (2 X 100) (OPTIONAL 150-300HP); HYDRAULIC FLOW 156 GPM; QUANTITY: 1 Learn More