Search results for: 'Continu'

YY-1136 ULTRAVIOLET STERILIZER MAINTENANCE OF UV STERILIZER: 1 CHECK REGULARLY TO ENSURE THE NORMAL OPERATION OF THE UV LAMP. 2. AFTER 9000 HOURS OR ONE YEAR OF CONTINUOUS USE, THE ULTRAVIOLET LAMP SHOULD BE REPLACED. WHEN REPLACING A NEW LAMP, FIRST UNPLUG THE POWER SOCKET OF THE LAMP AND TAKE OUT THE ULTRAVIOLET LAMP. PAY ATTENTION NOT TO TOUCH THE QUARTZ GLASS OF THE NEW LAMP WITH YOUR FINGERS, BECAUSE THE STAIN WILL AFFECT THE INTENSITY OF THE LIGHT, AND CAREFULLY PUT THE LAMP INTO THE CHAMBER OF THE STERILIZER. Learn More

INVENTORY NUMBER: E-4258 POLYESTER PACKING TAPE MACHINE (FROM RECYCLED PET SCRAP): XDC TSE-65/32 PET PRODUCTION CONDITION: NEW 1. ELECTRICAL VOLTAGE: 380V/3P/50HZ OR AS PER CUSTOMER 2. MATERIAL: PET SCRAP 3. MAX. EXTRUSION OUTPUT: 350KG PER HOUR NOTE：PRODUCTION CAPACITY DEPENDS ON RAW MATERIAL AND OPERATION. 4. SPECIFICATION：WIDTH OF TAPE 9 TO 24 mm, THICKNESS: 0.5 TO 1.2 mm 5. LINE SPEED：80M/MIN 6. CENTER HEIGHT OF EXTRUDER: 1000 mm 7. OPERATION DIRECTION: FROM RIGHT TO LEFT 8. POWER REQUIREMENT: 212KW（APPROX. 127KW AT CONTINUOUS USAGE） 9. COOLING RECYCLE: ≤20℃ ≥0.3MPA ～2T/H 10. AIR CONSUMPTION: 0.4 CUBIC METER PER MINUTE; PRESSURE ＞0.5MPA QUANTITY AVAILABLE: 1 Learn More

TT-8230 MASTER BAG 300X SQUARE BOTTOM PAPER BAG MACHINE, YEAR 2025 1. MASTER BAG 300X – SQUARE BOTTOM PAPER BAG MACHINE 2. YEAR: 2025 Learn More

TT-7967 KATO/WAUKESHA GENERATOR SETS, 4.3 MW, 60 Hz, YEAR 2001 1. NATURAL GAS 2. NEW AND NEVER INSTALLED Learn More

TT-7850 JENBACHER JGS 620F NATURAL GAS GENERATOR SYSTEM, 6.712 MW TOTAL, 11KV, 1500 RPM, YEAR 2012 1. JENBACHER GENERATOR SYSTEM 2. CONSISTING OF (2) MODEL JGS 620F JENBACHER NATURAL GAS GENSETS. 3. EACH RATED 3.356 MW; 2.9 MW NET OUTPUT; 1500 RPM; 3/50/11KV. YEAR BUILT 2012. 4. REPORTED 20,000 HOURS ON EACH UNIT. CONTROLLED BY (1) PANEL. 5. BRAND: JENBACHER 6. MODEL: JGS 620F 7. USED EQUIPMENT FACTS ABOUT THIS MACHINE 8. BRAND: JENBACHER (BY INNIO) 9. MODEL: JGS 620F 10. FUEL TYPE: NATURAL GAS 11. YEAR BUILT: 2012 QUANTITY: 1 Learn More

TT-7849 JENBACHER JGS 620F GENERATOR SYSTEM, 6.712 MW TOTAL, 11KV, 20K/23K HOURS, NATURAL GAS, 2012 1. USED JENBACHER GENERATOR SYSTEM 2. CONSISTING OF (2) MODEL JGS 620F JENBACHER NATURAL GAS GENSETS 3. EACH RATED 3.356 MW; 2.9 MW NET OUTPUT; 1500 RPM; 3/50/11KV 4. YEAR BUILT 2012 5. REPORTED 20,000 HOURS AND 23,000 HOURS. CONTROLLED BY (1) PANEL. 6. BRAND: JENBACHER 7. MODEL: JGS 620F 8. USED EQUIPMENT FACTS ABOUT THIS MACHINE 9. FUEL TYPE: NATURAL GAS QUANTITY: 1 Learn More

TT-7704 ALBRECHT BAUMER OFS-VT VERTICAL CNC FOAM CUTTING MACHINE 1. ALBRECHT BAUMER OFS-VT VERTICAL CNC FOAM CUTTING MACHINE 2. VERTICAL CNC CONTOUR CUTTER ALBRECHT BAUMER 3. MODEL OFS-VT 4. USED MACHINE QUANTITY: 1 Learn More

YY-3312 AUTOMATIC BED SHEET PRODUCTION LINE FEATURES: ENTIRE MACHINE INCLUDES FULLY ENCLOSED PROTECTION. QUANTITY: 1 Learn More

TT-7522 BENNINGER INDIGO DYEING, SIZING AND WARPING MACHINE, WIDTH 2000mm, YEAR 2007 1. BENNINGER INDIGO DYEING AND SIZING MACHINE 2. YEAR: 2007 3. BRAND: BENNINGER 4. INDIGO DYEING AND SIZING MACHINE - 14 BOXES (DYE AND WASH) 5. 2 SIZING BOXES 6. 25 TO 35 M/MIN (82 TO 115 FT/MIN) 7. 2000mm (78.7 IN) WIDTH 8. PLATE DIAMETER: 1400mm (55.1 IN) 9. CYLINDER DIAMETER: 456mm (17.95 IN) 10. MECHANISMS: ENTRY SCRAY 11. WASH BOX 1, 2, 3 12. OXIDATION ZONE 13. DYEING BOXES 1-7 14. VAPORIZER 15. WASH BOX 1, 2, 3, SIZING A & B 16. DRUM DRYER, EXIT Learn More

TT-7263 BENNINGER DENIM SIZING MACHINE, WIDTH 2000mm, YEAR 2007 1. BENNINGER DENIM SIZING MACHINE 2. YEAR: 2007 3. SPEED M/MIN: 25-35 M/MIN 4. WIDTH: 2000mm 5. CAPACITY METERS: 14 BOXES 2,000,000 METERS 6. BENNINGER DYEING AND SIZING MACHINE QUANTITY: 1 Learn More