Search results for: 'Machine op'

REFERENCE NUMBER: M-5140 (1212WYNKXX11) L MACHINE TO PRODUCE VARIOUS TYPES OF COTTON PADS MODEL: 96 DESIGNED FOR PRODUCTION OF VARIOUS TYPES OF COTTON PADS ALSO CALLED COTTON ROUNDS, COTTON SQUARES, DISC COTTON, FACIAL COTTON COTTON PADS FOR HYGIENIC USE, COSMETIC USE, INDUSTRIAL USE, AND MEDICAL APPLICATIONS PRODUCT OUTPUT DEPENDS ON THE SIZE OF THE PADS AND CAN REACH UP TO 1080 PIECES/MINUTE VARIOUS SHAPES OF COTTON PADS CAN BE PRODUCED AUTOMATICALLY IF SEPARATE TOOLS OF DIFFERENT SHAPES OR SIZES ARE INSTALLED THE COTTON PAD PRODUCER HAS THE OPTION OF MANUFACTURING EITHER EMBOSSED OR PLAIN COTTON PADS THE PRODUCT IS PACKAGED IN POLYBAGS IN SEMI AUTOMATIC MODE THE MACHINE CAN ALSO BE CONNECTED TO THE AUTOMATIC PACKAGING DEVICE TO OBTAIN DIFFERENT KINDS OF PACKAGING QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4451 (1010BHAGXX9) K TRUTZSCHLER DK903 CARDING MACHINES YEAR 2003 TRUTZSCHLER DK903 CARDING MACHINES TYPE: AUTO LEVELER YEAR: 2003 MODEL: DK 903 AUTO LEVELLER AUTO CAN CHANGER CHUTE FEED CAN SIZE: 36x48 SERVO MOTOR: GERMANY INVERTER: LENZEN EXCELLENT CONDITION IN OPERATION QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-5010 (12123GHBLSD11UN) L COMPLETE GLASS FIBER PROCESSING LINE FIBER PREPARATION & WEB FORMING EQUIPMENT CURING OVEN WITH ALL AUXILIARY EQUIPMENT, CROSS CUTTER, STACKER, AND WINDER RECUPERATIVE THERMAL OXIDIZER (RTO) TO TREAT OVEN EXHAUST DUST FILTRATION SYSTEM WITH RECYCLING OF FIBER AND RESIN PHENOLIC POWDER RESIN SUPPLY SYSTEM COMPLETE ELECTRIC CONTROL SYSTEM (SIEMENS S 7) FIBER BLEND CAPABILITIES: GLASS FIBER E GLASS UP TO STAPLE LENGTH OF 3 1/4 INCH 100% GLASS FIBER BLENDS WITH ANY MAN MADE FIBERS SUCH AS PET-PA OR RAYON GLASS FIBER BLENDS WITH ANY OF THE ABOVE PLUS ORGANIC FIBERS SUCH AS CELLULOSE, WOOD, NEWSPAPER, COTTON, AND ALL NATURAL FIBERS BI-CO FIBERS USED AS BINDER FIBER WITH A STAPLE LENGTH OF 2 INCHES AND A DTEX RANGE FROM 3 TO 10 MINIMUM BLEND RATIO IS 8% FOR EACH FIBER COMPONENT BLEND ACCURACY WITH THE USE OF OUR CONTROLS AND WEIGHING SYSTEM AS OFFERED +/- 2% WEB FORMING CAPABILITES: MINIMUM WEIGHT WITH 100% GLASS FIBER IS 35 TO 40 G/FT² MAXIMUM WEIGHT WITH 100% GLASS FIBER IS 300 G/FT² PRODUCT LOFT WITH 100% GLASS FIBER AT LOWEST WEIGHT AND FIBER LENGTH OF 3 INCH IS 45 TO 55 mm PRODUCT LOFT WITH 100% GLASS FIBER AT HIGHEST WEIGHT IS 250 mm PRODUCT WEIGHT ACCURACY IF OUR WEIGHT AND CONTROL SYSTEM IS IN USE WILL BE +/- 3% IN MACHINE & CROSS MACHINE DIRECTION FIBER DISTRIBUTION AND PRODUCT APPEARANCE AT LOWEST WEIGHT +/- 5% (WINDOWS AND CLOUDS) PHENOLIC RESIN CAPABILITIES: POWDER INTRODUCTION RATE INTO THE WEB FORMER IS MIN OF 10% AND A MAX OF 40% TRADITIONALLY THE AMOUNT OF BINDER RESIN IN USE IS BETWEEN 18 TO 22% IN RELATION TO THE FIBER WEIGHT POWDER DISTRIBUTION WITHIN THE PRODUCT AT AN ACCURACY OF +/- 3% PRODUCTION CAPACITIES PER HOUR WITH A MAXIMUM WORKING WIDTH OF 110 INCHES: WITH THE LOWEST PRODUCTION WEIGHT OF 35 TO 40 G/FT² 14 M/MIN AND 1,660 LB/HR WITH A PRODUCT WEIGHT OF 100 G/FT² 16 M/MIN OR 52 FT/MIN AND 4,000 LB/HR HIGHER PRODUCT WEIGHT (E.G.) 200 G/FT² 8 TO 9 M/MIN OR 26 TO 30 FT/MIN AT 4,000 LB/HR THESE PRODUCTION NUMBERS ARE CONSERVATIVE AND BASED ON ACTUAL TRIALS AND EXPERIENCE THE REAL PRODUCTION OUTPUT PER HOUR CAN BE INCREASED WHEN LOWER QUALITY EXPECTATIONS ARE ACCEPTED AND THE OPERATORS HAVE ACQUAINTED THEMSELVES WITH THE FEATURES OF THE EQUIPMENT QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5035 (121255DNE11RX) L OERLIKON SAURER VOLKMANN VTS-07 COMPACT TWISTING MACHINE YEAR 2008 – 96 SPINDLES OERLIKON SAURER VOLKMANN TWISTING MACHINE YEAR OF MANUFACTURE: 2008 / ONLY 1,810 OPERATING HOURS TYPE: VTS-07 COMPACT TWISTER WITH 96 SPINDLES ASSEMBLY-WOUND FEED PACKAGES OF 6” SINGLE-PLY YARN FEED PACKAGES OF 2 x 6” VOLCOJET SYSTEM MOTOR 30KW INCLUDES BOBBIN 32,000 (6 DIFFERENT COLORS) 165X20X11X4.5mm (NEW) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1758 (6602BHBBE5U) GEOTEXTILE CALENDER MACHINE -5700mm- YEAR 2004 MAKE: BOMBI MECCANICA ITALY 5.7 M WIDE GEOTEXTILE CALENDER MACHINE YEAR: 2004 IS IN PERFECT CONDITION FEW HOUR PRODUCTION IT IS CONNECTED AND CAN BE SHOWN TO CUSTOMERS VOLTAGE: 440V / 60 HZ / 3 PHASES UNWINDER ACCUMULATORS WITH ROLLS, 50M OF CONTENT 2 ROLLS CALENDER 5.7 WIDE 200,000 KCAL/HR GAS OIL HEATER UPPER HOOD FOR THE SMOKE COLLECT METAL DETECTOR INSTALLED ON TOP OF CALENDER ADJUSTING 2 ROLLS TEMPERATURE INDEP. ACCUMULATORS WITH ROLLS, 50 M LONG CROSS CUTTER W/6 LONG SLITTERS, AND EXIT BELT WINDER OPTION ROLL DISCHARGER 2.3 M WINDER, SPEED UP TO 30 M/MIN, READY TO BE SYNCHRONIZED 2.3 M WIDE, EDGE TRIMMERS WITH 2 DISC BLADES FELT WIDTH: 5.5 METER WEB THICKNESS AT ENTRY: AROUND 1 TO 2 mm WEB PREPARATION AT THE INLET: CROSS LAPPING AND NEEDLING PRODUCTION LINE SPEED: UP TO 25 M/MIN TYPE OF TREATMENT: HEAT SETTING, SMOOTHING OF THE SURFACES AND CALIBRATION, CUTTING AND ROLLING UP FELT WEIGHT: 90 TO 300 GSM FIBERS: POLY COTTON BLEND, POLYESTER, ACRYLIC, POLYPROP THERMOSETTING TEMEPRATURE: UP TO 225°C QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1484 (66025GYT5U) KLIEVERIK TRANSFER PRINTING CALENDER MODEL TC131 YEAR 1995 – 126” BELT KLIEVERIK TRANSFER PRINTING CALENDER 126" BELT 1995 YR MODEL TC131 30" DIA. X 138" FACE CYLINDER WITH 126" BLANKET (NOMEX) ONBOARD ENCLOSED HEATING SYSTEM INCLUDES SCRAY, HIGH ENTRY WITH E&L KF-2040 GUIDER OPERATOR PLATFORM E&L WIDTH MONITOR 4-ROLL ACCUMULATOR 136" WITH 12 YD CAPACITY 2-ROLL SURFACE TAKE-UP WITH EDGE GUIDING AND YARDAGE COUNTERS OPERATING SPEED OF 2-20MTR/MIN THIS MACHINE EMPLOYS A VAPOR PHASE PROCESS TO TRANSFER DYESTUFF FROM THE PAPER TO THE CLOTH UNDER THE INFLUENCE OF HEAT AND PRESSURE THE CALENDER DRUM IS HEATED BY ELECTRICAL ELEMENTS PLACED IN AN OIL BATH DIA. OF TRANSFER PAPER ROLL - 14" MACHINE SPEED - MIN. - 2 METERS/MINUTE MAX. - 20 METERS PER MINUTE MAX DRUM TEMPERATURE - 220C (464 F) DIA. HEATED DRUM - 760mm - 30.4" BLANKET WIDTH - 3500mm - 140" OAD OF CALENDER: 112.6" L. X 182.4" W. X 89" T. WEIGHT - 7,400KG (16,314 LBS). QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4868 (1111275NKG10RX) L PUB BREWERY 20HL SPECIFICATION: 1. MALT HANDLING - CYLINDER-CONIC MALT SILO WITH 25M³ CONTENT, MADE IN FIBRE GLASS / PLASTIC, STANDING OUTDOOR ON STEEL CONSTRUCTION - MALT CONVEYORS / SPIRAL CONVEYOR INTO 1ST FLOOR - 2-ROLLER MALT MILL - GRIST CASE - FALL PIPE IN MASH COPPER (FOR DUST FREE MASHING-IN) - GIBBET-LIFT FOR BAGGED SPECIAL MALTS 2. BREWHOUSE TOWER BREWHOUSE FOR 20 HL / BREW, COMPLETE IN STAINLESS STEEL, BUILT 1994, STEAM HEATED, ISOLATED AND COVERED WITH STAINLESS STEEL SHEET, 2 CRANE EYELET, 2 STAINLESS STEEL PLATFORM, WITH: - MASH- / WORT COPPER WITH BOTTOM HEATING ZONE AND INTERIOR COOKER, SIDEWAYS AGITATOR, MANWAY ENTRANCE HATCH, LIGHTNING, STEAM REGULATION VALVE - LAUTER TUN, WITH STAINLESS STEEL RAKING MACHINE WITH SEW-DRIVE FROM TOP, WITH SPENT GRAINS SLIDER, STAINLESS STEEL FALSE BOTTOM, SPENT GRAINS HATCH, VERTICAL SIGHT GLASS, LIGHTNING, SPRAY HEAD, DOME LID WITH BUILT IN CONTROL CABINET - SPINDLE STATION WITH WASHING TABLE IN STAINLESS STEEL, ABOUT 1,5M WALL ASSEMBLED - HOT WATER TANK, WITH 30 HL, IN STAINLESS STEEL, ISOLATED AND COVERED WITH STAINLESS STEEL SHEET, HEATABLE, WITH MANWAY IN THE WALL, LEVEL DISPLAY - PRESSURE RAISING PUMP - WORT COOLING, 1-STAGE PLATE APPARATUS - WORT AERATION IN STAINLESS STEEL 3. FERMENTING- AND STORAGE TANKS - 5 CCTS, WITH 40 HL NET / 46 HL GROSS CONTENT, ALL TANKS 3 BAR, BUILT 1994, STANDING ON FEET, PI-ISOLATED FULLY WELDED WITH STAINLESS STEEL JACKET, WITH JACKET COOLING FROM CONE BELOW TO ½ WALL 60 LT COOLING JACKET 3 BAR, WITH MANWAY IN THE WALL, 2 OUTLETS WITH BUTTERFLY VALVES, TEMPERATURE SENSOR PT100, SPRAY HEAD, PULLED DOWN CLEANING PIPE WITH BUTTERFLY VALVE, BUNGING ARMATURE, OVER PRESSURE VALVE, SAMPLER, 2 CRANE EYELETS, 2 OF THE TANKS WITH LEVEL DISPLAY - DIGITAL TEMPERATURE CONTROL FOR 5 TANKS IN STAINLESS STEEL CONTROL CABINET - CIRCULATING PUMP IN STAINLESS STEEL, MOBILE, WITH SWITCH - MANY GOOD BEER HOSES - 6 X 10 HL BEER DISPENSING TANKS, MAKE DUO TANK, BUILT 2002, 3,0 / 4,3 BAR, COOL ABLE, ISOLATED WITH STAINLESS STEEL-JACKET FULLY WELDED, FOR INLINE-OPERATION, LYING IN RACK, SCREWED STAINLESS STEEL RACK, WITH PRESSURE ARMATURE, OUTLET ARMATURE WITH REDUCTION TO BARE CONNECTION, MANWAY WITH BIG SIGHT GLASS IN MANWAY LED - PANEL FOR 3 TYPES OF BEER 4. FILLING COMBINED BOTTLE-/KEGGING PLANT, WITH 1 CLEANING TUB, HEATED AND 1 REBUILT KEG: - BOTTLE CLEANING MACHINE FOR CLEANING OF 8 BOTTLES INSIDE AND OUTSIDE, FOR UP TO 2LT BOTTLES - BOTTLE FILLING STATION WITH HUB CYLINDER FROM BELOW, WITH SPLINTER PROTECTION - COMBINED KEG-CLEANING- AND FILLING STATION - BUILT IN CONTROL CABINET WITH SIEMENS S5 CONTROL AND OPERATING CONSOLE OP 7 5. OTHER EQUIPMENT - STEAM BOILER FOR ABOUT F280 KG/H, WITH GAS BURNER, FULLY SERVICED ON 4TH AUGUST 2014, BUILT IN 1994 - CONDENSATE TUB IN STAINLESS STEEL AT WALL AND SECOND SMALL S/S-TUB - WATER TREATMENT - STEAM REGULATION AND CONDENSATE VALVES IN CYCLE - STAINLESS STEEL CHIMNEY PLANT ABOUT 8-10M - AIR COMPRESSOR WITH WIND KETTLE, BUILT 1994 - COOLING PLANT / COLD WATER PLANT, MAKE L&R KÄLTETECHNIK, TYPE: WRK-17/SL/-5, PLANT BUILT 1997, COOLING AGENT R 407 C, WITH NEW COMPRESSOR AND NEW PLATE HEAT EXCHANGER IN 2014 FOR 10,000 € INVESTED, EVAPORATOR WITH 2 VENTILATOR OUTSIDE HANGING ON THE WALL 6.1 OTHERS - ABOUT 100 KETS, MAKE SCHÄFER, PLUS-KEGS, FLAT FITTING IN DIFFERENT SIZES, NEUTRAL - PARTY-KEGS, WITH BAVARIAN TAP, PU-COVERED IN BLACK AND WITH WOOD-OPTIC - ABOUT 800 NEUTRAL CLIP LOCK BOTTLES EACH 1 LT 6.2 DIMENSIONS THE ROOM HEIGHT IN BREWHOUSE AND CCTS IS 4.50M. THE PLANT AS ASSEMBLED ON 10.75 X 4.38M. PLEASE NOTE THAT THE BREWERY IS ONLY AVAILABLE AS A SINGLE SALE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4791 (111121RV10U) L DOUBLE NEEDLE COMPOUND FEED WALKING FOOT LOCKSTITCH SEWING MACHINE TYPICAL GC20606-D2T3 SEWING MACHINE DOUBLE NEEDLE COMPOUND FEED WALKING FOOT LOCK STITCH WITH FULL AUTOMATIC OPTIONS GAUGE IS 1/4” QUANTITY AVAILABLE: 8 Learn More

COMPUTER SHUTTLE LOCK STITCH MULTI-NEEDLE QUILTING MACHINE Learn More

REFERENCE NUMBER: M-3678 (880RUDGXX7) L (FOR SALE IN THE FUTURE) GRIBETZ QUILTER (BLUE COLOR) – CHAIN - COMPUTER TYPE/MODEL: GI-2300 CHAIN/COMPT. MACHINE SIZE: 90” ULTRA 12 NEEDLE SPACING: 1×3×6 MACHINE WIRED: 220V 3PH 60HZ AUX. TRANSFORMER: 440V 3PH 60HZ INCLUDES: (2) THREAD RACKS (1) CAT WALK (1) CLOTH TRAY (1) TRANSFORMER (1) CONTROL PANEL (2) CIRCULAR BLADES ON THE BACK (88) LOOPERS CONTROL PANEL: (1) NEMATRON-OPTI TOUCH SCREEN (1) DRIVE: MSC 850 (2) DRIVE: RAD02-2033 POWER SOURCE: 200/220/230 TOSHIBA CORPORATION (A) SERIAL NO.: 92 1296 (B) SERIAL NO.: 92 1301 (1) DRIVE: MITSUBISHI E500 QUANTITY AVAILABLE: 1 Learn More