Search results for: 'Fra'

REFERENCE NUMBER: J-2640
DYEING AND FINISHING PLANT FOR SALE

ITEM 001
THIES SAMPLE DYEING MACHINE
MODEL: MINISOFT SAMPLE
CAPACITY: 50 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 002
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
3 PORT SPLIT/SPLIT
CAPACITY: 900 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 003
THIES DYEING MACHINE
MODEL: ECOSOFT PLUS
2 PORT SPLIT/SPLIT
CAPACITY: 600 KGS
YEAR: 1999
MICROPROCESSOR CONTROL
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 004
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
1 PORT SPLIT/SPLIT
CAPACITY: 300 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: A460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 005
GASTON COUNTY DYEING MACHINE
MODEL: AQUAFLOW
2 PORT
CAPACITY; 250 KGS
YEAR: 1987
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING AND UNLOADING REEL
QUANTITY: 1

ITEM 006
THIES DYEING MACHINE
MODEL: SOFT TRD
2 TUBE
CAPACITY: 700 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 007 (also our J-2647)
LAFER OPEN WIDTH COMPACTOR MACHINE
MODEL: KSA 500 2400/2200
YEAR: 1998
LAFER TEXEN CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY, VERTICAL PIN CHAIN, WITH PLATE GUIDES, RAIL OPENING, PINNING BRUSHES, PINS ONLY, WITH SUPPORT SECTION FOR THE FABRIC IN THE CENTER, AT 10’ THERE IS A STEAMING SECTION, TOTAL LENGTH OF THE TENTER IS 30’, WITH AUTOMATIC LUBRICATION FOR THE CHAIN
• KSA 500 COMPACTOR BENCH WITH TEXEN CONTROLS
• TENSIONLESS FABRIC CONVEYOR
• PLAITOR AND FABRIC SCRAY WITH OPTICAL LOAD SENSOR
• INLINE INSPECTION BATCHER MACHINE, WITHH A BACK LIGHTED BOARD, MANUAL CUT
• SCALE TO WEIGHT THE FABRIC
QUANTITY: 1

ITEM 008 (also our J-2648)
SANTEX TUBULAR 4-ROLL EXTRACTION PAD
MODEL: SANTASTRETCH PLUS 140
YEAR: 1998
COMPOSED OF TURNTABLE, DETWISTER, TUBULAR 4-ROLL PAD WITH WET SPREADERS, PLAITOR
WITH ADDITION TANKS FOR SOFTENER
REEL FABRIC PLAITOR EXIT
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 009
SANTEX CONVEYOR DRYER FOR OPEN WIDTH AND TUBULAR FABRIC
MODEL: SANTASHRINK 4/5240
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER TO
• (2) SANTEX 2-ROLL PADS, RUBBER OVER RUBBER, 102” WIDE x 12” DIAMETER, STAINLESS STEEL PAN, 10-TON PAD, SWING-AWAY PAN, TENSION BAR WITH 2 STAINLESS STEEL MIXING TANKS, 75 GALLONS EACH
• DRIVEN SCROLL ROLLS WITH EDGE GUIDE CONTROL, WIDTH 95”
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY 45°, YEAR 1998, VERTICAL PIN CHAIN, 30’ LONG WITH TANDEMATIC PLATE GUIDES, RAIL GUIDES, PINNING BRUSHES, GUIDE SUPPORT FOR THE FABRIC, FABRIC CONVEYOR TO ENTER BOTH TUBULAR OR OPEN WIDTH FABRIC TO
• CONVEYOR DRYER 100” WIDE, 5 ZONES, 3-PASS WITH MAXON BURNERS, 5 CIRCULATING FANS TO CONVEYOR BELT TO PLAITOR
• ALL MOTORS AND SANTEX CONTROLS AND MONITORS
QUANTITY: 1

ITEM 010
SANTEX AG TUBULAR COMPACTOR MACHINE
MODEL: SANTASPREAD 140
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSIONS BAR ENTRY
• OPERATOR’S PLATFORM
• TENSION DEVICE
• DRIVEN SPREADER BARS
• STEAMING DEVICE
• TUBULAR COMPACTING BENCH
• FELT BLANKET ONTO THE CONVEYOR BELT
• PRECISION PLAITOR
• TABELTOP ELECTRONIC SCALE
QUANTITY: 1

ITEM 011
COMET NAPPER
MODEL: PEGSO-X4
YEAR: 1998
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
24 ROLLS WITH TURNING BARS FOR TUBULAR 90” WIDE
XYCOM CONTROLS
12-BAG COLLECTION SYSTEM AND PLAITOR
YEAR: 1996
QUANTITY: 1

ITEM 012
STENTEX TENTER FRAME
MODEL: STENTOTHERM 3300
YEAR: 1999
STENTEX CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION ENTRY TO TEXT-STAR TYPE GUIDER TO 2 ROLL PAD
• ADDITION TANK TOP SCRAY PAD TO TEXT-STAR TYPE GUIDER
• TWO ROLL PAD R/R 10 TON
• OPERATOR’S PLATFORM
• WORKING WIDTH 1800mm
• HORIZONTAL PIN CHAIN, KNIT ENTRY
• TANDEMATIC SPLITLEVEL DECURLERS
• OVERFEED
• PINNING BRUSHES
• STEAM BOX
• RAIL GUIDERS, 20 FEET ENTRY, 8 ZONES
• 80 FEET HOUSING
• SCREEN MONITORS
• GAS FIRED, MAXON OVEPAK 408 BURNERS
• HONEYWELL CONTROLS
• 3 FEET COOLING ZONE
• 2 COOLING CANS, SELVEDGE TRIMMERS
• PLIATOR, SCRAY
• ZONE IN LINE INSPECTION BATCHER
QUANTITY: 1

ITEM 013
ZIMMER ROTARY SCREEN PRINTING MACHINE
MODEL: R92-S153
YEAR: 1993
COMPOSED OF:
• TENSION BAR SKY ENTRY
• SCRAY
• CORINO BRUSH
• CORINO PRINT GUIDER
• ZIMMER PRINTER, 8 COLOR, 86” BLANEKT
• PRINT CONVEYOR DRYER, 30’ LONG, 3-ZONE, GAS FIRED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 014
SAFETY SWITCH BULLET NOSE SLITTER
MODEL: CUTTING
WITH REEL FABRIC PLIATOR
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

253 – 51 x 74 13.5G 4.5” (12)
QUANTITY: 61

253 – 51 x 71 13.5g 4.5” (12)
QUANTITY: 29

253 – 59 x 74 13.5g 4.5” (12)
QUANTITY: 4

336 FE 4/6 (48x68) 13g 6” (16)
QUANTITY: 9

336 FE 5/0 (54x73) 13g 6” (16)
QUANTITY: 7

336 FE C/K (69x76) 13g 6” (14)
QUANTITY: 9

336 FE 6/6 (69x73) 13g 6” (14)
QUANTITY: 8

4/6 OPEN COIL 13.75 5.25” (20)
QUANTITY: 10

364 4/6XL 13-6 5.25” (16)
QUANTITY: 90

609 FE 4” 6/6 POCK COIL 15G (40)
QUANTITY: 14

588 FE 8” 4/6 POCKET COIL 15G/2.0mm (48x68x8) (44)
QUANTITY: 11

488 FE 8” 5/0 POCKET COIL 15G/2.0mm (54x74x8) (40)
QUANTITY: 4

C/K QE BOLSA 896/1057 15-16 8” TB (3KEV) (20)
QUANTITY: 20

396 BR 7” 3/3 13.75G (14)
QUANTITY: 10

396 BR 7” 3/3XL 13.75G (14)
QUANTITY: 14

396 BR 7” 4/6 13.75 (14)
QUANTITY: 21

396 BR 7” 5/0 13.75G (14)
QUANTITY: 8

396 BR 7” 6/6 13.75G (14)
QUANTITY: 9

368 FE 6” 4/6 (45.5x65.5) 12.5g (16)
QUANTITY: 13

5/5 1131/1386 17 1” NANO COIL (3KBU30) (60)
QUANTITY: 25

789 ACTIVE EDGE 3/3 8” (3KFT56) LEGGETT (36)
QUANTITY: 9

789 ACTIVE EDGE 3/3XL 8” (3KFT56) LEGGETT (36)
QUANTITY: 20

5/0 CPE BOLSA 580/682 13 ¾-16 8” (3KFT53) (28)
QUANTITY: 11

660 3/3XL INNERACT 14.5-6g 6” (16)
QUANTITY: 31

660 4/6 INNERACT 14.5-6g 6” (16)
QUANTITY: 7

660 72x80 INNERACT 14.5-6g 6” (16)
QUANTITY: 56

660 CK INNERACT 14.5-6g 6” (14)
QUANTITY: 11

DORNIER PTV16/S YEAR 2005
NOMINAL WIDTH: 3800mm
AT2 CONTROLLER
8 ECS COLOR SELECTORS
STÄUBLI DOBBY WITH MAX 24 HARNESS FRAMES
LET-OFF AND TAKE-UP BOTH ELECTRONIC
WITH 16 HARNESS FRAMES
4 WEFT FEEDERS
6000 HEDDLES/DROPPERS + 1 EXTERNAL BATCHING MOTION + 2 SPLIT BEAMS

QUANTITY: 1

NARROW CONVOLUTER 27 7/8 inches wide (708 mm)

REFERENCE NUMBER: L-6029

ARTIFICIAL GRASS CUT TUFTER, 5/8 GAUGE, 4100mm

SEWING WIDTH: 4100mm

GAUGE: 5/8”

VARIABLE ELECTRONIC DRIVE

BRAND NEW GRASS-CUT PILE

SINGLE INLINE INDIVIDUAL NEEDLE BAR

QUANTITY: 1

REFERENCE NUMBER: J-1404

48” PROTEIN BAR (BAR LINE), YEAR 2015

REFERENCE NUMBER: M-7873

CHOCOLATE CEREAL AND GRANOLA BAR AUTOMATIC LINE

AUTOMATIC LINE

FOR CHOCOLATE CEREAL AND GRANOLA BARS

AUTOMATIC COMBINATION BETWEEN THE FREEZING, FORMING, AND PRESSING ROLLERS, AND THE SLITTING TECHNOLOGY.

THIS PRODUCING LINE IS A MULTI-FUNCTION LINE WHICH CONSISTS OF KITCHEN EQUIPMENTS, FORMING AND SHEETING SYSTEM, NUTS SPRINKLING SYSTEM, FORMING AND PRESSING ROLLER, REFRIGERATION SYSTEM, COOLING TUNNEL, CANDY BAR SLITTING, CUTTING AND CONVEYING SYSTEM, AND CHOCOLATE ENROBING MACHINE, ETC.

THIS LINE TAKES THE PLACE OF THE TRADITIONAL, MANUAL WORKSHOP PRODUCTION WITH FULL AUTOMATIC MACHINERY PRODUCTION. THIS LINE WILL BE IDEAL FOR THE CANDY BAR LEISURE FOOD INDUSTRY, WITH MODERN AND LARGE QUANTITY PRODUCTION.

REFERENCE NUMBER: L-5508 

FILLING STORAGE: 12 KGS
4 NOZZLES
WEIGHING RANGE: 0.2 TO 8G/ 0.2 TO 20G
0.01 G
SCALES BY FILLING PIPE: ¾
WITH DOWN RETURNING SYSTEM
WITH HUMIDITY CONTROL SYSTEM
OPTIONAL SEALING FUNCTION
FILLING MATERIAL: 50 TO 90% DOWN
OVERALL DIMENSIONS: 2100 X 4380 X 2100mm

QUANTITY: 1

REFERENCE NUMBER: M-7677
HIGH SPEED ALUMINUM NESPRESSO FILLING SEALING MACHINE
TECHNICAL PARAMETERS:
MODEL #1:
SPEED: 8,500 TO 9,600 CUPS PER HOUR
WORKING STATION: 4 LANES
MACHINE SIZE (LxWxH): 5000mm x 1000mm x 2600mm
MODEL #2:
SPEED: 4,000 TO 4,800 CUPS PER HOUR
WORKING STATION: 2 LANES
MACHINE SIZE (LxWxH): 5000mm x 900mm x 2600mm

BRAND: BENNINGER
TYPE: BENCREEL
CATEGORY: WARPING MACHINES
YEAR: 1999
NUMBER OF POSITIONS: 630 POSITIONS X 2 SIDES (42 SWIVELLING FRAMES OF 3X5TIERS)
AIR PRESSURE: 6 TO MAX. 8 BAR
OTHER SPECIFICATIONS: TENSION CONTROL TYPE BEN-TENS
YARN DETECTION TYPE BEN-GARD
DIMENSIONS: +/- LENGTH 30M X WIDTH +/- 6M
ELECTRICAL CONNECTION 400V/50HZ

QUANTITY: 1