Search results for: 'air+in'

REFERENCE NUMBER: P-4332

WET WIPES FOLDING MACHINE

MODEL RF

Machine  Characteristic:
Control system: PLC
Drive element: inverter control
Operate interface: LCD touch screen
Detection online: splicing  connector detect
Auto splicing: raw material automatic  splicing
Wipes counting: auto counting, set by LCD
Flow control: 2.5-4 times moisture
Moisture type: 2 liquid pipes spray
Cutting: stainless steel round knife
Protective alarm: breakdown alarm and stop

Specifications:
Raw material: spunlaced nonwoven, therbond etc. nonwoven
Raw material specification: max W250mm, Φ1100mm
Axis QTY settings: 2 rolls raw material, auto splicing
Diameter of ventilating shaft: 3"
Folding type: Z, W fold
Wet wipes size: L100mm  W50-100mm (special  specifications need be marked)
Open size: L200mm  W140-250mm
Production speed: 500-600 pieces/min, design 650 pieces/min
Machine space: L4900mm  W1200mm  H1500mm
Power: AC 380V  50/60Hz  4KW
Compressed air: 0.6-0.8Mpa   100L/min
Machine  net  weight: 2000kg

Option  equipment:  Stainless steel agitate tank Automatic  Knife  grinder

QUANTITY: 1

REFERENCE NUMBER: P-4323

WET WIPES PRODUCTION LINE

Model WL100

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface:  LCD touch screen
Packing style: end seal & reciprocating type
Frequency division detection: nonwoven, film, label detect respectively
Auto splicing: film automatic bonding, label automatic switching
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 12 fluid pipes spray independently
SUS Agitate tank: 2 sets, 600L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W350mm, φ1400mm
Axis QTY settings:12 rolls raw materials,12 electronic eyes detect online
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic bonding without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-220mm  W90-115mm
Open size: L120-220mm W150-330mm
Package size: L150-300mm W80-120mm H10-80mm
Design speed: 120bags/min &250cutting/min
Production speed: 50 bags/min &4000 pieces/min
Machine space: L16000mm W2500mm H2100mm
Power: AC 380V 50/60Hz 18KW
Compressed air: 0.6-0.8Mpa 250L/min
Machine net weight :10000kg

Option equipment: Coding machine Metal detector 

QUANTITY: 1

REFERENCE NUMBER: P-4330

ROLL TYPE WET WIPES

Model: WL-R
Machine Characteristic:
Control system: PLC
Drive element: inverter control
Operate interface: LCD touch screen
Packing style: end seal & rotary type
Detection online: raw material & film detect respectively
Moisture type: spray
SUS Agitate tank: 600L stainless steel agitate tank
Liquid level control: electronic detect control automatically

Specifications:
Raw material: spunlaced nonwoven, airlaid paper etc.
Raw material specification: max W300mm, φ1200mm
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP CPP PET/PE PET/AL etc. heat-seal material
Packing Film specification: max W280mm, φ350mm
Diameter of ventilating shaft: 3"
Rolling type: V fold
Production size:L75-180mm max  φ30mm
Open size: L150-300mm W150-300mm
Package size: L110-250mm W30-50mm
Production speed: up to packing material, design 200 bags/min
Machine space: L5000mm W3500mm H1900mm
Power: AC 380V 50/60Hz 4KW
Compressed air: 0.6-0.8Mpa 100L/min
Machine net weight : 2000kg

Option equipment: Production counting machine Coding machine

QUANTITY: 1

REFERENCE NUMBER: P-4331

PORTABLE WET WIPES MACHINE

Model: L62
Machine Characteristic
Control system: Multi-Axis Motion Controller & PLC
Drive element: servo motor
Operate interface:  LCD touch screen
Packing style: end seal & reciprocating  type
Detection online: splicing connector detect
Auto splicing: raw material automatic splicing 
Wipes counting: auto counting, set by LCD
Flow control: 2.5-4 times moisture
Moisture type: 2 liquid pipes spray
SUS Agitate tank: 600L stainless steel agitate tank
Liquid level control: electronic detect control automatically

Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W250mm, φ1100mm
Axis QTY settings:2 rolls raw materials , auto splicing
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label (paste safety label need be marked)
Label size: max W100mm φ400mm
Diameter of ventilating shaft: 3"
Folding  type: Z, W fold
Wet wipes size:L100mm  W50-100mm(special specifications need be marked)
Open size: L200mm W140-250mm
Package size: L130-200mm W55-110mm H5-50mm
Production speed: 70 bags/min &550 pieces/min
Machine space: L4900mm W4700mm H2200mm
Power: AC 380V 50/60Hz 12KW
Compressed air: 0.6-0.8Mpa 300L/min
Machine net weight : about  3000kg

Option equipment: Coding machine Automatic Knife grinder

QUANTITY: 1

REFERENCE NUMBER: P-4333

DRY WIPES FOLDING MACHINE

Model: TF
Machine Characteristic
Control system: PLC
Drive element: inverter control
Operate interface:  LCD touch screen
Detection online: bonding connector detect
Auto splicing: raw material automatic splicing 
Wipes counting: auto counting, set by LCD
Cutting: endless-belt type knife
Cut polish: sharpen online, intelligent control
Protective alarm: breakdown alarm and stop
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W300mm, φ1100mm
Axis QTY settings:2 rolls raw materials , auto splicing
Diameter of ventilating shaft: 3"
Folding  type: Z, W fold
Wet wipes size:L150mm  W50-150mm(special specifications need be marked)
Open size: L300mm W150-300mm
Production speed: 500-600 pieces/min ,design 600 pieces/min
Machine space: L4700mm W1200mm H2200mm
Power: AC 380V 50/60Hz 4KW
Compressed air: 0.6-0.8Mpa 100L/min
Machine net weight :  2000kg

QUANTITY: 1

REFERENCE NUMBER: P-4334

WET WIPES PACKING MACHINE

Model: P100
Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: Full servo motor
Operate interface: 8" LCD touch screen
End heat seal: vertical seal servo motor
End seal reciprocation: left & right servo motor
Film feeding: servo motor
Pushrod feeding: servo motor
Back seal:2 sets heat seal
Label tapping: servo motor, adjust online

Specifications
Suitable packing material: PET/PE BOPP PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm,φ350mm
Diameter of ventilating shaft :3"
Suitable label: transparent label& opaque label
Label size: max  W100mm,φ400mm
Diameter of ventilating shaft:3"
Package size: L100mm-350mm W50-160mm H5-80mm
Production speed: 40-80 bags/min     design 100 bags/min    depend  on the production
Machine space: L5300mm W1000mm H2100mm
Power: AC380V 50/60Hz 7.5KW
Compressed air:0.6-0.8Mpa  200L/min
Machine net weight: 1200kg

Option equipment: Coding machine. Safety labeling machine

QUANTITY: 1

REFERENCE NUMBER: F-1430

FEATHER FILLING MACHINE MODEL SR-180

PRODUCT FEATURES

•              FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•              AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•              FILLING TIME IS 2 TO 5 SECONDS

•              NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•              CE CERTIFICATE

•              TYPE : SR-180/280/380/480

•              DIMENSION: 1200 x 1500 x 2000MM

•              VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•              POWER: 2.2 KW

•              FILLING RANGE: 0.5-10 /1-50 G, DEPENDING ON THE MATERIAL

•              ACCURACY: ±0.2G/±0.5G

•              AIR PRESSURE: 0.5-0.8MPA

•              THE COMPUTERIZED DOWN & FEATHER WEIGHING FILLING MACHINE IS MAINLY USED TO FILL JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, COMFORTERS ETC WITH A COMPUTERIZED WEIGHING SYSTEM.

•              TWO HOPPER-SYSTEM FOR CONSTANT SUPPLY.

•              THE VACUUM FILLING FUNCTION DOES NOT HURT THE MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING.

•              ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 TO

0.5 GRAM (DEPENDING ON THE RANGE OF MEASURE). IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT AND CHOOSE GROUP ERROR OR SINGLE PIECE ERROR FROM THE CONTROL PANEL

•              THE WHOLE LINE CAN BE HANDLED BY ONLY 1 OPERATOR BY VERY SIMPLE

OPERATION WHICH SAVES YOU A BIG AMOUNT OF LABOR COSTS.

•              ALL THE MATERIALS ARE INSIDE THE HOPPERS WITHOUT PRODUCING ANY DUST THAT AFFECTS THE WORKING AREA

•              KEY ELECTRICAL COMPONENTS IMPORTED

•              THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•              ACCORDING TO DIFFERENT QUANTITY AND QUALITY PRODUCTION REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 GROUPS OF RECIPES AND EACH RECIPE CAN BE 50 SETS OF DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS

•              THE AVERAGE FILLING TIME CAN BE 4 TO 10 SECONDS (DEPENDING ON THE ACCURACY) AND THE FILLING TIME CAN BE ADJUSTE

•              DIFFERENT REQUIREMENTS OF THE CUSTOMER CAN BE CONSIDERED BY OUR PROFESSIONAL ENGINEERS TO WORK ON OUR MACHINES SO THEY ARE SUITABLE FOR YOUR PARTICULAR NEEDS

•              MATERIAL HOPPER:        1200 x 1500 x 2000MM                               1PCS

•              WEIGHING SYSTEM:        1200 x 400 x 1000MM                  1PCS

•              FILLING TABLE :1200 x 550 x 1500                                            1PCS

•              PLC CONTROL SYSTEM AND CONTROL PANEL:                     1SETS

•              BLOWER:                                                                                             1PCS

•              PIPE SYSTEM

REFERENCE NUMBER: M-4009

FORMALDEHYDE PLANT & SYSTEMS -90,000 TON PER YEAR

90,000 TON/YEAR
(200 MILLION LBS/YR @ 37% CONCENTRATION)

SHUT DOWN: SPRING 2010

PLANT PRODUCES A 37% AND A 50% FORMALDEHYDE SOLUTION BY PARTIAL OXIDATION AND DEHYDROGENATION OF METHANOL.

RAW MATERIALS:

METHANOL

SILVER CATALYST

ORIGINAL PLANT EQUIPPED WITH:

MONSANTO PROCESS

(2) CONVERTERS AND ASSOCIATED EQUIPMENT, ABSORBER AND DISTILLATION COLUMN

MODIFICATIONS:

ADDED 3RD CONVERTER FOR CAPACITY IMPROVEMENTS

METHANOL VENTS SCRUBBER ADDED

WASTE HEAT BOILER ADDED

INSTALLED A DCS ON THE REACTOR SECTION (2006)

PRODUCT SPECIFICATIONS:

CLEAR AQUEOUS SOLUTIONS OF:

50U: 50.0 - 50.45% FA, <1.05% MEOH, <0.055% FORMIC ACID

37U: 37.0 - 37.3% FA, <1.05% MEOH, <0.035% FORMIC ACID

37M: 37.0 - 37.5% FA, 9 - 13% MEOH

OTHER CONCENTRATIONS AS REQUIRED UP TO 50% BOTH INHIBITED AND UNINHIBITED

CONTACT IPP FOR A COMPLETE PROCESS DESCRIPTION AND FLOW DIAGRAM

COMPLETE DOCUMENTATION AVAILABLE

FORMALDEHYDE PROCESS UNITS FOR SALE
(MAJOR UNITS ONLY. CONTACT IPP FOR A COMPLETE LIST)

2.9 - 20 MM BTU/HR JOHN ZINK THERMAL OXIDIZER SYSTEM

DESIGNED TO INCINERATE TWO SOLVENT LADEN GAS STREAMS USING A SMALL AMOUNT OF NATURAL GAS.

ONE SMALL SOLVENT GAS STREAM WITH A FLOW OF 120 - 320 SCFM, THE OTHER LARGER OFF GAS STREAM OF 8,200 - 17,500 LBS/HR.

GAS BURNER IS RATED FOR 2.9 - 20 MM BTU/HR (INSTALLED NEW IN 2006)

THE WASTE HEAT BOILER PORTION GENERATES STEAM AT 25,000 LBS/HR WITH A PRESSURE OF 75 PSIG (NORMAL) UP TO 125 PSIG (DESIGN).

THE UNIT USES STAGED BURNER TECHNOLOGY TO REDUCE OR ELIMINATE NOX.

CONTACT IPP FOR A MAJOR LIST OF COMPONENTS

DISTILLATION COLUMN SYSTEM 

13,000 LBS/HR LIGHT ALDEHYDES AND LIGHT ALCOHOL DISTILLATION

COMPLETE SYSTEM INCLUDES:

72" DIA. X 75' 316LSS BUEHLER-MORRIS DISTILLATION TRAY COLUMN

(2) SS SHELL AND TUBE HEAT EXCHANGERS

2,889 SQ. FT. 304SS, 1,090 SQ. FT. 316SS

(2) 316SS PLATE AND FRAME HEAT EXCHANGERS

478.35 SQ. FT., 73.2 SQ. FT.

(3) PUMPS

241 LBS/HR TO 13,000 LBS/HR

BEPEX BRIQUETTER SYSTEM

MODEL 300 MS28

SKID MOUNTED

2.5" DIA.

3,000 PSI MAX. OPERATING PRESSURE

22 RPM ROLL SPEED

INCLUDES 300 HP SIEMENS AC MOTOR, FOOTE JONES GEARBOX AND FEED HOPPER

316SS 3-EFFECT BUFLOVAK-BLAW KNOX EVAPORATION SYSTEM

36,900 LBS/HR (16,000 KG/HR)

FIRST EFFECT: 1,480 SQ. FT.

SECOND AND THIRD EFFECT: 2,950 SQ. FT.

INCLUDES (3) VAPOR BODIES WITH 1,900 GALLON CAPACITY, (3) STEAM CHESTS AND (2) OVERHEAD CONDENSERS (1,728 SQ. FT AND 1,605 SQ. FT.)

304SS STRUTHERS WELLS "KRYSTAL" CRYSTALLIZER SYSTEM

7' DIA. X 60" WITH 9' CONE BOTTOM

THIS UNIT WILL EVAPORATE APPROXIMATELY 4,400 LBS/HR OF H2O (5 LBS PER SQ. FT. SURFACE AREA OF HEATER)

INCLUDES COMPLETE ACCESSORY PACKAGE: VAPORIZER AND SUSPENSION CONTAINER, STEAM CHEST HEATER, 4,000 GALLON 347SS TANK, LIGHTNIN RIGHT ANGLE MIXER, ELBOW PUMP, OVERHEADS CONDENSER AND HYPULSE FILTER

25,400 CFM 321SS FULLER FLUIDIZED BED DRYER

12' DIA. CHAMBER

1,555 CU. FT. DRYING CHAMBER CAPACITY

DESIGNED TO DRY 8,560 LBS/HR OF PELLETS (@ 15% MOISTURE) WITH A DENSITY OF 40 LBS/CU. FT.

114,240 LBS/HR AIR FLOW

1,325,000 BTU/HR HEAT TRANSFER

INCLUDES (3) HEATING COILS (40 PSI STEAM) FOR UNDER BED HEATING

REFERENCE NUMBER: C-4239

ER-WE-PA LAMINATOR EXTRUSION LAMINATING COATING, WORKING WIDTH 1240mm, YEAR 2012

BRAND: ER-WE-PA

LAMINATOR EXTRUSION LAMINATING COATING

MADE IN GERMANY

YEAR: 2012
TYPE (SOLVENT, SOLVENTLESS, COMBI): NOT RELEVANT
WORKING WIDTH: 1240mm (NET PRODUCT 1200mm)
MATERIALS: BOPP 15-50 MIC – PAPER30-200 G/M2- ALUMINIUM 7-25 MIC
THICKNESS: FOR THE COATING IT IS:

MIN: 8 GR/SQM

MAX: 60 GR/SQM

THE OVERALL THICKNESS UP TO-180 MIC

SPEED: 400 M/MIN
DIAM REELS: 1000mm
POWER INSTALLED
AVAILABILITY OF MIXER
AVAILABILITY OF CORONA TREATMENT

ANNUAL CAPACITY OF 5,000 TONS

UP TO 1200MM FINISH PRODUCT

MAXIMUM MASTER ROLL OD –1300 MM (CORE 6")

CO-EX CAPABILITY: 3 EXTRUDERS, 5 LAYERS

CORONA TREATMENT FOR EACH UNWINDER

PRIMING STATION

CAPABLE TO PROCESS VARIETY RESINS CHEMISTRIES

PRODUCTS

FILMS FOR INSULATION,

FOOD INDUSTRY,

PERSONAL CAR AND MEDICAL AID,

LIDS

TAILOR MADE FILMS

HIGH BARRIER PROPERTIES AGAINST MOISTURE AND OXYGEN.

NO SOLVENTS -GREEN TECHNOLOGY.

HIGH REFLECTANCE

PET /XPE/AL FOIL

PET-MET /XPE /AL FOIL

HIGH BARRIER REFLECTIVE FILM LAMINATED TO AN INSULATING LAYER IT PROVIDES THERMAL INSULATION FOR ALL KINDS OF ROOFS, OUTSIDE WALLS, CEILINGS, ETC.

HIGH BARRIER REFLECTIVE FILM HEAT LAMINATED TO POLYETHYLENE INSULATING LAYER IT PROVIDES THERMAL INSULATION IN CONSTRUCTION, AIR-CONDITIONING, ETC.

MULTILAYERFILMSWITHHIGHBARRIERFORTRANSPORTATIONOFPARTSTHATARESENSITIVETOHUMIDITYANDOXYGEN:

MULTILAYERFILMSWITHHIGHBARRIERFORPROTECTIONOFCOMMUNICATIONSCABLES

FILM FOR PACKAGING OF POVIDONE-IODINE PADS, SWAB STICKS AND OTHER AGGRESSIVE MATERIALS.

FILM FOR PACKAGING OF ALCOHOL PADS, VASELINE BASED PADS, LUBRICANT, JELLY, ETC.

QUANTITY: 1

C-4014 MACHTEX SPRAYCOATING AND LAMINATING MACHINE, WORKING WIDTH 1600mm, YEAR 1994

MAKE: MACHTEX
TYPE: ES3 - 150
YEAR: 1994
WORKING WIDTH: 1600mm
MACHINE LENGTH: 2250mm
MACHINE WIDTH: 2000mm
MACHINE HIGH: 2200mm

QUANTITY: 1