REFERENCE NUMBER: K-5243 (YOU MUST LOOK AT THE VIDEO, IT’S AMAZING)
AUTOMATIC TRIMMING MACHINE FOR FOAM BLOCKS OR FOAM MATTRESSES, FOUR SIDES
DESCRIPTION:
PU SLABS CUT FROM FOAM BLOCK BY HORIZONTAL CUTTING UNDERGO PERIMETRICAL STRETCHING, (SOMETIMES A FEW CENTIMETERS STRETCHING). IN ORDER TO ACHIEVE SATISFACTORY SIZES (±1MM EACH SIDE) THE REMOVING OF IRREGULAR EDGES IS REQUIRED.
THIS MACHINE TRIMS FOAM SLABS AND ALSO COUPLED SLABS. IT CAN BE PLACED AT THE END OF THE MATTRESS GLUING PLANT (MANUAL OR AUTOMATIC) OR BEYOND THE HORIZONTAL CUTTING MACHINE. THE COUPLED FOAM SHEETS ARE NOT ALIGNED AND NEED TO BE TRIMMED.
OFTEN THE COUPLED MATTRESSES ARE TRIMMED ONE BY ONE ALONG THE FOUR SIDES WITH A MANUAL VERTICAL CUTTING MACHINE WASTING A LARGE AMOUNT OF TIME. THIS MACHINE AUTOMATICALLY TRIMS THE FOUR SIDES OF FOAM MATTRESSES WITHOUT ANY HANDLING; THAT MEANS AN ACCURATE TRIM AND SHORT PROCESSING TIME.
QUANTITY AVAILABLE: 1 Learn More
T-8260 ALBRECHT BAUMER IS-M, 40 METERS PER MINUTE, CUT HEIGHT 1300mm, YEAR 1987
MAKE: ALBRECHT BAUMER
MODEL: IS-M
SPEED: 0 TO 40 METERS PER MINUTE
CUTTING HEIGHT: 1300mm
KNIFE MEASUREMENTS: 10 x 0.45 x 10350mm
POWER SUPPLY: 380 VOLTS, 3-PHASE, 50 Hz
POWER REQUIREMENT: 4 KW
YEAR: 1987
RIGHT TABLE: 2435mm
BUN WIDTH (RIGHT TABLE): 2200mm
BUN LENGTH: 2580mm
LEFT TABLE: 2435mm
BUN WIDTH (LEFT TABLE): 2200mm
BUN LENGTH: 2580mm)
QUANTITY: 1 Learn More
V-2197 VERTICAL FAST WIRE CONTOUR CUTTER – WITH NESTING
For Max. Block Size: Length 2440 mm (96 in), Width 1220 mm (48 in), Height 600 mm (23.6 in)
Machine for cutting pipe insulation
A programmed-control cutting machine which runs on AutoCAD, controlled by computer.
Main Features of Contour Cutter:
1. Integrated design & cutting program. Simply design and cut;
2. Big cost savings by automatically arranging the product;
3. Support numeric instrument;
4. Higher material utilization resulting from computer aided nesting of shapes;
5. Cut speed can be set to achieve the best-cut speed for different foam material;
6. Can pre-cut on the computer to check cutting course;
7. With Nesting System
Learn More
REFERENCE NUMBER: K-3236
QUILTED FOAM WASTE REPROCESSING MACHINE (NEW)
THIS MACHINE IS SUITABLE FOR FOAM WASTE REPROCESSING OR FOAM RECYCLING.
THE MACHINE'S CUTTING TOOLS ARE IMPORTED FROM GERMANY.
THE MACHINE CAN CUT THE FOAM INTO REGULAR PIECES AND WITHOUT PRODUCING WASTE POWDER AND CAN ALSO CUT QUILTED FOAM FABRIC WASTE; FOR EXAMPLE MATTRESS TICKING WITH FIBERFILL AND NONWOVEN-BACKING.
ORDINARILY QUILTED FABRIC WASTE CANNOT BE REUSED BUT WITH OUR QUILTED FABRIC WASTE AND FOAM CUTTING MACHINE, THE MANUFACTURER CAN RECLAIM THIS WASTE.
BY CUTTING THE QUILTED FABRIC WASTE IT IS TRANSFORMED INTO LITTLE PIECES, AND IT CAN BE USED AS FILLING MATERIAL FOR PILLOWS, CUSHIONS, ETC.
QUANTITY AVAILABLE: 1 Learn More
YY-1356 VERTICAL CONTINUOUS FOAM MACHINE, DIAMETER 1500mm
APPLICATION:
THIS CONTINUOUS FOAM PLANT PRODUCES FLEXIBLE PU FOAM,
AUTOMATIC SYSTEM:
- AUTOMATIC PPG TANK MIXING AND HEATING AND COOLING SYSTEM
- AUTOMATIC TDI TANK MIXING AND HEATING AND COOLING SYSTEM
- AUTOMATIC POWDER TANK MIXING SYETEM
- AUTOMATIC CONVEYOR SYSTEM
- AUTOMATIC FOAM BLOCK CUTTING SYSTEM
- AUTOMATIC PNEUMATIC FOAM DELIVERY SYSTEM
- AUTOMATIC FOAM BLOCK LIFT SYSTEM
- AUTOMATIC PNEUMATIC VALVE SYSTEM
MACHINE HEIGHT: 8500mm
FLOORSPACE DIMENSIONS: 6000 x 6000 x 11000mm
OVERALL HEIGHT REQUIRED: 11000mm
OTHER SPACE REQUIRED FOR RAW MATERIALS AND FINISH MATERIALS: 1000m2 TO 12000m2 FOR RAW MATERIALS AND FINISHED ROLLS Learn More
E-4175 FOAM CUTTING MACHINESINVENTORY NUMBER: E-4175 FOAM CUTTING MACHINES MODEL SL-HC HORIZONTAL CUTTER MODEL SL-RC CAROUSEL CUTTER MODEL SL-VC VERTICAL CUTTER QUANTITY AVAILABLE: 3 Learn More
K-5243 AUTOMATIC TRIMMING MACHINE FOR FOAM BLOCKS OR FOAM MATTRESSES, FOUR SIDESREFERENCE NUMBER: K-5243 (YOU MUST LOOK AT THE VIDEO, IT’S AMAZING) AUTOMATIC TRIMMING MACHINE FOR FOAM BLOCKS OR FOAM MATTRESSES, FOUR SIDES DESCRIPTION: PU SLABS CUT FROM FOAM BLOCK BY HORIZONTAL CUTTING UNDERGO PERIMETRICAL STRETCHING, (SOMETIMES A FEW CENTIMETERS STRETCHING). IN ORDER TO ACHIEVE SATISFACTORY SIZES (±1MM EACH SIDE) THE REMOVING OF IRREGULAR EDGES IS REQUIRED. THIS MACHINE TRIMS FOAM SLABS AND ALSO COUPLED SLABS. IT CAN BE PLACED AT THE END OF THE MATTRESS GLUING PLANT (MANUAL OR AUTOMATIC) OR BEYOND THE HORIZONTAL CUTTING MACHINE. THE COUPLED FOAM SHEETS ARE NOT ALIGNED AND NEED TO BE TRIMMED. OFTEN THE COUPLED MATTRESSES ARE TRIMMED ONE BY ONE ALONG THE FOUR SIDES WITH A MANUAL VERTICAL CUTTING MACHINE WASTING A LARGE AMOUNT OF TIME. THIS MACHINE AUTOMATICALLY TRIMS THE FOUR SIDES OF FOAM MATTRESSES WITHOUT ANY HANDLING; THAT MEANS AN ACCURATE TRIM AND SHORT PROCESSING TIME. QUANTITY AVAILABLE: 1 Learn More
E-6265 COMPLETE FOAM PLANT FOR SALEINVENTORY NUMBER: E-6265 COMPLETE FOAM PLANT FOR SALE: FOAM MAKING MACHINE FOAM BLOCK FORMING MACHINE MODEL F-3# HORIZONTAL CUTTER HORIZONTAL FOAM CUTTING MACHINE MODEL PQ-2150: VERTICAL CUTTER VERTICAL CUTTING MACHINE MODEL LQ-4L PEELER FOAM PEELER GRINDING MACHINE FOAM GRINDER (CRUSHING) MACHINE MODEL: FS-22 ROUND BLOCK MOLD ROUND FOAM MOLD: ROUND MOLD TO FEED PEELER MACHINE HORIZONTAL ROUND BLOCK BORING MACHINE QUANTITY AVAILABLE: 1 Learn More
T-8260 ALBRECHT BAUMER IS-M, 40 METERS PER MINUTE, CUT HEIGHT 1300mm, YEAR 1987T-8260 ALBRECHT BAUMER IS-M, 40 METERS PER MINUTE, CUT HEIGHT 1300mm, YEAR 1987 MAKE: ALBRECHT BAUMER MODEL: IS-M SPEED: 0 TO 40 METERS PER MINUTE CUTTING HEIGHT: 1300mm KNIFE MEASUREMENTS: 10 x 0.45 x 10350mm POWER SUPPLY: 380 VOLTS, 3-PHASE, 50 Hz POWER REQUIREMENT: 4 KW YEAR: 1987 RIGHT TABLE: 2435mm BUN WIDTH (RIGHT TABLE): 2200mm BUN LENGTH: 2580mm LEFT TABLE: 2435mm BUN WIDTH (LEFT TABLE): 2200mm BUN LENGTH: 2580mm) QUANTITY: 1 Learn More
TT-8339 DIGITAL OSCILLATING CUTTING MACHINETT-8339 DIGITAL OSCILLATING CUTTING MACHINE 1. MODEL: 1 DIGITAL KNIFE 5 X 8 FEET 2. MODEL: 2 DIGITAL KNIFE 4 X 4 FEET 3. 1 DIGITAL KNIFE CUTTING TABLE WITH OSCILLATING KNIFE AND VACUUM TABLE MACHINE 4. 2 DIGITAL KNIFE CUTTING TABLE WITH OSCILLATING KNIFE AND VACUUM TABLE MACHINE 5. OSCILLATING KNIFE: OSCILLATING KNIFE FOR CUTTING GASKET, FIBER, RUBBER, SILICONE, CARDBOARD, PAPERBOARD, CORRUGATED BOARD, FOAM, LEATHER, FOAM, PET FELT. ETC Learn More
TT-3155 SITOLA SCC-W HORIZONTAL CNC CONTOUR CUTTING MACHINE, YEAR 2021TT-3155 SITOLA SCC-W HORIZONTAL CNC CONTOUR CUTTING MACHINE, YEAR 2021 AVAILABILITY SHORT DELIVERY TIMES UPON AGREEMENT. Learn More
V-2197 VERTICAL FAST WIRE CONTOUR CUTTER – WITH NESTINGV-2197 VERTICAL FAST WIRE CONTOUR CUTTER – WITH NESTING For Max. Block Size: Length 2440 mm (96 in), Width 1220 mm (48 in), Height 600 mm (23.6 in) Machine for cutting pipe insulation A programmed-control cutting machine which runs on AutoCAD, controlled by computer. Main Features of Contour Cutter: 1. Integrated design & cutting program. Simply design and cut; 2. Big cost savings by automatically arranging the product; 3. Support numeric instrument; 4. Higher material utilization resulting from computer aided nesting of shapes; 5. Cut speed can be set to achieve the best-cut speed for different foam material; 6. Can pre-cut on the computer to check cutting course; 7. With Nesting System Learn More
K-3236 QUILTED FOAM WASTE REPROCESSING MACHINE (NEW)REFERENCE NUMBER: K-3236 QUILTED FOAM WASTE REPROCESSING MACHINE (NEW) THIS MACHINE IS SUITABLE FOR FOAM WASTE REPROCESSING OR FOAM RECYCLING. THE MACHINE'S CUTTING TOOLS ARE IMPORTED FROM GERMANY. THE MACHINE CAN CUT THE FOAM INTO REGULAR PIECES AND WITHOUT PRODUCING WASTE POWDER AND CAN ALSO CUT QUILTED FOAM FABRIC WASTE; FOR EXAMPLE MATTRESS TICKING WITH FIBERFILL AND NONWOVEN-BACKING. ORDINARILY QUILTED FABRIC WASTE CANNOT BE REUSED BUT WITH OUR QUILTED FABRIC WASTE AND FOAM CUTTING MACHINE, THE MANUFACTURER CAN RECLAIM THIS WASTE. BY CUTTING THE QUILTED FABRIC WASTE IT IS TRANSFORMED INTO LITTLE PIECES, AND IT CAN BE USED AS FILLING MATERIAL FOR PILLOWS, CUSHIONS, ETC. QUANTITY AVAILABLE: 1 Learn More
YY-1356 VERTICAL CONTINUOUS FOAM MACHINE, DIAMETER 1500mmYY-1356 VERTICAL CONTINUOUS FOAM MACHINE, DIAMETER 1500mm APPLICATION: THIS CONTINUOUS FOAM PLANT PRODUCES FLEXIBLE PU FOAM, AUTOMATIC SYSTEM: - AUTOMATIC PPG TANK MIXING AND HEATING AND COOLING SYSTEM - AUTOMATIC TDI TANK MIXING AND HEATING AND COOLING SYSTEM - AUTOMATIC POWDER TANK MIXING SYETEM - AUTOMATIC CONVEYOR SYSTEM - AUTOMATIC FOAM BLOCK CUTTING SYSTEM - AUTOMATIC PNEUMATIC FOAM DELIVERY SYSTEM - AUTOMATIC FOAM BLOCK LIFT SYSTEM - AUTOMATIC PNEUMATIC VALVE SYSTEM MACHINE HEIGHT: 8500mm FLOORSPACE DIMENSIONS: 6000 x 6000 x 11000mm OVERALL HEIGHT REQUIRED: 11000mm OTHER SPACE REQUIRED FOR RAW MATERIALS AND FINISH MATERIALS: 1000m2 TO 12000m2 FOR RAW MATERIALS AND FINISHED ROLLS Learn More