Search results for: 'air com'

TT-1316 NONWOVEN MIDDLE SPEED NEEDLE LOOM, WORKING WIDTH 3200mm MACHINE STRUCTURE FEATURES: 1. SPLICING TYPE STRUCTURE, IT IS MADE BY HIGH QUALITY Q235 STEEL PLATE WELDING, THEN FINE TEMPERING QUALITATIVELY WITH SUFFICIENT COMPLETENESS AND STABILITY. UPPER AND DOWN MACHINE GIRDERS BOTH PRECISELY PROCESSING MACHINED. 2. ECCENTRIC BEARINGS ADOPT TORRINGTON FAMOUS BRAND 3. MAIN SHAFT IS USING 42CROMO MATERIAL. AFTER CONDITIONING TREATMENT FINE FINISHING AND GRINDING. 4. NEEDLE GIRDER HIGH SPEED TURBINE ELECTRIC LIFTING, STRIPPER PLATE TURBINE ELECTRIC LIFTING, NEEDLE GIRDER ROLLER SCALE DISPLAY. AIR LOCKED THE NEEDLE PLATE TIGHTLY. 5. NEEDLE PLATE LUOYANG MADE BY MAGNESIUM ALLOY DIE CASTING PLATE COMPOSITE PU, RADON ARRANGE NEEDLES HOLE φ1.82mm 6. INPUT PVC LATTICE, OUTPUT ROLLER ADOPTS φ155mm, HIGH QUALITY SEAMLESS STEEL PIPE, AFTER FINISHING GRINDING, THE SURFACE IS PLATED WITH HARD CHROME, UPPER ROLLER ADJUSTABLE HEIGHT AIR CYLINDER. 7. MAIN MOTOR, OUTPUT ROLLER ALL FREQUENCY CONTROL. 8. INSTALLED POWER: AROUND 15.5KW, MAIN MOTOR 11 KW. QUANTITY: 1 SET Learn More

REFERENCE NUMBER: L-5934

MONFORTS 6-F TWIN AIR STENTER YEAR 2003 – WORKING WIDTH 2400mm

 

STENTER

RAMA MONFORTS

MAKE: MONFORTS

MODEL: 6-F TWIN

YEAR: 2003

440 VAC 60HZ

NATURAL GAS

AIR COMPRESSOR 7 BAR

 

QUANTITY: 1

Learn More

THIS MACHINE PROVIDED WITH A BRAKING SYSTEM WHICH PERMITS THE FILLING OF WADDING PILLOWS AND QUILTS WITH ALL MATERIALS (POLYESTER, FEATHER, EXPANDED POLYURETHANE, COTTON, WOOL, ETC.) THE PARTICULAR WIDENED SHAPE OF THE TURBINE MAKES IT POSSIBLE TO OBTAIN REMARKABLE PERFORMANCES IN THE FILLING UP USING THE SPECIAL TUBE IT IS POSSIBLE TO SUCK UP THE MATERIAL DIRECTLY FROM THE VARIOUS CONTAINERS. THE BRAKING IS VERY RAPID (ABOUT 1/10 OF SECOND) AND DOES NOT REQUIRE MAINTENANCE SINCE IT IS OBTAINED THROUGH A PNEUMATIC DEVICE. THE CONTROL DEVICE IS A PNEUMATIC FOOT-LEVER WHICH LEAVES THE OPERATOR’S HANDS UNENGAGED. SAFETY MOTOR PROTECTOR SWITCH. IT CAN BE SUPPLIED BOTH IN A ONE-PHASE AND IN A THREE-PHASE VERSION. THE MACHINE IS CONSTRUCTED IN CONFORMITY WITH THE EEC DIRECTIVES 2006/42/CE, 2004/108/CE E 2006/95/CE AND SUCCESSIVE MODIFICATIONS AND MARKED CE. ON REQUEST WITH SPEED VARIATION THE FAN SPEED IS ADJUSTABLE FROM 2000 TO 4200 RPM, IN ORDER TO OPTIMIZE THE SPEED OF FILLING TO THE SHAPE AND THE SIZE OF THE PILLOW AT MAXIMUM SPEED, THE AMOUNT OF MATERIAL FILLED IS ABOUT 200 GRAMS PER SECOND. ON THE PART OF THE MACHINE THE LOAD OF THE MATERIAL, THERE ARE 2 DAMPERS. THIS PREVENTS THE OVERLOADING OF THE TURBINE AND THE BLOCK OF MATERIAL, BECAUSE WHEN I RELASE THE PEDAL, FIRST I BLOCK THE FLOW OF MATERIAL AND THEN THE AIR FLOW. THE PARTICULAR SHAPE OF THE OUTLET PIPE ALLOWS TO FILL THE PILLOWS THAT HAVE AIR-TIGHT LINING. THE TURBINE IS MADE OF A CAST ALUMINUM. THE COMMAND TO THE DUMPERS IS GIVEN BY A PEDAL, SO THE OPERATOR HAS BOTH HANDS FREE. THE APPLICATION OF THE GRIPPERS ON THE OUTLET PIPE OF THE FILLER R 3PV ALLOWS A SINGLE OPERATOR TO USE MORE FILLERS. FURTHERMORE, IT IS POSSIBLE CHANGE THE TIME THAT THE GRIPPERS STAY CLOSED. THIS ALLOWS TO SET THE AMOUNT OF MATERIAL TO PUT INSIDE HE PILLOW, WITH A GOOD PRECISION. THE TIME IS ADJUSTABLE TO FILL DIFFERENT KINDS OF PILLOWS WITH DIFFERENT AMOUNTS OF MATERIAL. QUANTITY: 1 Learn More

YY-2908 UNUSED 15.2MW SOLAR T 130 GAS TURBINE GENERATOR PACKAGES, QUANTITY 2, 22.789 KVA, 11 KV, 50 Hz YEAR OF MANUFACTURE: 2013/14 CONDITION: AS NEW OPERATING HOURS: 0 STATUS: INSTALLED FUEL: NG OR SYNGAS QUANTITY: 2 Learn More

YY-2894 NEW SIEMENS SGT 400, YEAR 2018 SIEMENS SGT 400 (12.9 MW) GAS TURBINE · 11-STAGE COMPRESSOR, 6 COMBUSTION CHAMBERS, 2-STAGE POWER TURBINE · GAS FUEL SYSTEM · DLE COMBUSTION SYSTEM · HOT-END DRIVE · 2-SHAFT ENGINE · LEFT-HAND EXHAUST · MAIN LUBRICATION PUMP · EQUIVALENT OPERATING HOURS : 0H · TOTAL STARTS : 0 · NEW, NEVER INSTALLED OR COMMISSIONED QUANTITY: 1 Learn More

T-8540 WET WIPES MACHINE, CAPACITY 30 TO 120 PIECES PER PACK WET WIPES MACHINE CAPACITY: 30 TO 120 PIECES PER PACK DRIVE MODE: AUTOMATIC STABLE SPEED: 3500 TO 4800 PIECES PER MINUTE (25 TO 60 BAGS) MACHINE SIZE (L X W X H): 12200 × 2400 × 2200mm QUANTITY: 1 Learn More

P-5096 STA ROASTING SYSTEM MILLENIUM 3 240 KILOS

ABSOLUTE RESPECT OF THE COFFEE, BIG PERFORMANCE IN REDUCED SPACES WITH MOST HOT AIR THROUGH THE BEANS OF A DRUM BATCHING SYSTEM. 10 YEARS OF VERY EXCITING RESEARCH HAS GONE INTO THIS LINE OF MACHINES. MILLENNIUM CONCENTRATES TECNOLOGY INNOVATION IN THE RESPECT OF THE PRODUCT QUALITY WHICH HAS NEVER BEEN REALISED BEFORE. WE GIVE VALUE TO YOUR PRODUCT WHILE MAKING YOUR JOB SIMPLER.

TECHNICAL DATA:
CONTROL BOARD WITH PARTIAL OR FULL AUTOMATIC DRIVE.
COMPUTERIZED AUTOMATIC ROASTING PROCESS WITH RECORDING SYSTEM.
CONTROL THROUGH PLC. FITTING FOR PC
ALARM SYSTEM BY BUZZER AND SIGNAL LAMP WITH DISPLAY ANOMALIES
PRE-HEATING SYSTEM FOR RAW COFFEE IN STAND-BY
TEMPERATURE COFFEE CONTROL BOTH DURING ROASTING AND COOLING CYCLE
HOT AIR GENERATOR (STA IMPIANTI PATENTED SYSTEM).
"LOW INERTIA" DEVICE FOR IMMEDIATE STARTING OF PRODUCTION.
INDUSTRIAL BURNER WITH 3 LEVELS (VARIABLES) AT IMMEDIATE ANSWER
PROCESS AIR ADMITTANCE CONTROL SYSTEM.
FITTING FOR CLEANED AIR TO AIR EXCHANGER
CONTROL BOARD COMPLETE WITH LIGHTING DEVICE.
SCREENER WITH AUTOMATIC DRAWING.
WATER PUMP COMPLETE WITH TANK AND SAFETY “BY PASS” DEVICE.
PRE-COOLING SYSTEM CONNECTED TO THE ROASTING DRUM.
PRE-COOLING SYSTEM CONNECTED TO THE COOLER.
FIRE PREVENTION SYSTEM LINKED TO THE CHAFF COLLECTOR.
CYCLON FOR COOLER AND DESTONER.
SELF-CLEANING COOLING CONTAINER.
ADDITIONAL EMERGENCY DISCHARGE FOR COOLER.
INTEGRATED DESTONER.
SERVOCONTROL DEVICE FOR REMOTE ADJUSTMENT OF DESTONER.
SOUND PROOFING SYSTEM
GLOBAL SAFETY PROTECTION

QUANTITY: 1

Learn More

THIES AIR STREAM 2 ROPES HT 140 °C 2 x ROPE DYEING MACHINE THIES AIR STREAM 4 ROPES HT 140 °C 3 x ROPE DYEING MACHINE Learn More

REFERENCE NUMBER: A-1876
END OF LINE UNIT T4.0 FOR NEEDLEPUNCHED PRODUCTS – 4000mm

PRODUCT TO BE PROCESSED: NEEDLEPUNCHED NONWOVENS
PRODUCT WIDTH: 4.000 MM

WORKING SPEED: 1 – 20 M/MIN

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4007

NITRIC ACID PLANT -1,000 TONS PER DAY & 500 TONS PER DAY

 

UNUSED 1,000 TON/DAY NITRIC ACID PLANT
(SEE 500 TON/DAY NITRIC ACID PLANT BELOW)

• PRODUCT: WEAK NITRIC ACID
• MAJOR EQUIPMENT:
  (CONTACT IPP FOR A COMPLETE LIST)
• ABSORBER COLUMN:
• 304LSS CONSTRUCTION
• (37) SIEVE TRAYS
• AIR COMPRESSOR:
• 201,100 NM³/HR (DRY)
• TYPE AV63-14, AXIAL
• 14.3 MW
• 5,199 RPM
• NOX COMPRESSOR:
• 181,000 NM³/HR
• TYPE E90-3, CENTRIFUGAL
• 8.6 MW
• 5,820 RPM
• EXPANDER:
• 161,000 NM³/HR (DRY)
• TYPE WP15.5-870/380, CENTRIFUGAL
• 5,200 RPM
• STEAM TURBINE:
• 48.96 TON/HR
• TYPE NK40/45/40, CONDENSING
• 9.1 MW
• AMMONIA BURNER
• CONTACT IPP FOR A COMPLETE PROCESS DESCRIPTION AND FLOW DIAGRAM
• COMPLETE DOCUMENTATION AVAILABLE

500 TON/DAY NITRIC ACID PLANT

• PRODUCES 65% CONCENTRATED NITRIC ACID
• TURN-DOWN CAPABILITIES AS LOW AS 300 TON/DAY
• TECHNOLOGY: WEATHERLY MEDIUM-PRESSURE
• THIS PLANT IS A NET STEAM EXPORTER WITH 550, 175, AND 60 PSIG STEAM BEING PRODUCED ON THE WASTE HEAT BOILERS AND 520 PSIG STEAM BEING CONSUMED BY THE AIR COMPRESSOR STEAM TURBINE DRIVE
• MAJOR EQUIPMENT:
  (CONTACT IPP FOR A COMPLETE LIST)
• ABSORBER COLUMN:
• 11' DIA. X 127'
• 304LSS CONSTRUCTION
• (49) SIEVE TRAYS
• OPERATES AT 98% EFFICIENCY
• AIR COMPRESSOR:
• INGERSOLL RAND 2-STAGE CENTRIFUGAL
• INCLUDES 520 PSIG TERRY STEAM TURBINE DRIVE ASSISTED BY A DRESSER-RAND TAIL GAS TURBINE DRIVE
• CONVERTER:
• 304LSS CONSTRUCTION WITH AN INCONEL 617 BASKET
• CATALYST COMPOSITION IS 90% PLATINUM, 5% RHODIUM AND 5% PALLADIUM
• HEAT TRAIN:
• CONTACT IPP FOR COMPONENT DETAILS
• INCLUDES EXPANDER GAS HEATER, MEDIUM-PRESSURE WASTE HEAT BOILER, TAIL GAS HEATER, FILTER AND LOW-PRESSURE WASTE HEAT BOILER
• CONTACT IPP FOR A COMPLETE PROCESS DESCRIPTION AND FLOW DIAGRAM

COMPLETE DOCUMENTATION AVAILABLE

Learn More