Search results for: 'Opera'

REFERENCE NUMBER: G-8444 PUNCHING MACHINE MODEL FST 11 MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-2077 (77082KHU6UX) ALBRECHT BAUMER IS-M VERTICAL CUTTING MACHINE WITH TURNTABLE COMPLETELY MODERNISED VERTICAL FOAM CUTTING MACHINE TYPE IS-M WITH TURNTABLE THAT IS NOW AVAILABLE. QUANTITY AVAILABLE: 1 Learn More

•ITEM NO.: F-2 •DIMENSION: APPROX. 11000*2500*3000MM •VOLTAGE: 380V 50HZ 3PHASE •POWER: 11KW •FILLING RANGE: 2-100 G, DEPENDING ON THE MATERIAL •ACCURACY: ±1G •AIR PRESSURE: 0.5-0.8MPA •THERE ARE 4 WEIGHING SYSTEM AND 2 WORKING TABLE ASSEMBLED TO THE DOWN FEATHER FILLING LINE •IT IS MAINLY USED TO MAKE DOWN FEATHER QUILTING Learn More

THIS MACHINE PROVIDED WITH A BRAKING SYSTEM WHICH PERMITS THE FILLING OF WADDING PILLOWS AND QUILTS WITH ALL MATERIALS (POLYESTER, FEATHER, EXPANDED POLYURETHANE, COTTON, WOOL, ETC.) THE PARTICULAR WIDENED SHAPE OF THE TURBINE MAKES IT POSSIBLE TO OBTAIN REMARKABLE PERFORMANCES IN THE FILLING UP USING THE SPECIAL TUBE IT IS POSSIBLE TO SUCK UP THE MATERIAL DIRECTLY FROM THE VARIOUS CONTAINERS. THE BRAKING IS VERY RAPID (ABOUT 1/10 OF SECOND) AND DOES NOT REQUIRE MAINTENANCE SINCE IT IS OBTAINED THROUGH A PNEUMATIC DEVICE. THE CONTROL DEVICE IS A PNEUMATIC FOOT-LEVER WHICH LEAVES THE OPERATOR’S HANDS UNENGAGED. SAFETY MOTOR PROTECTOR SWITCH. IT CAN BE SUPPLIED BOTH IN A ONE-PHASE AND IN A THREE-PHASE VERSION. THE MACHINE IS CONSTRUCTED IN CONFORMITY WITH THE EEC DIRECTIVES 2006/42/CE, 2004/108/CE E 2006/95/CE AND SUCCESSIVE MODIFICATIONS AND MARKED CE. ON REQUEST WITH SPEED VARIATION THE FAN SPEED IS ADJUSTABLE FROM 2000 TO 4200 RPM, IN ORDER TO OPTIMIZE THE SPEED OF FILLING TO THE SHAPE AND THE SIZE OF THE PILLOW AT MAXIMUM SPEED, THE AMOUNT OF MATERIAL FILLED IS ABOUT 200 GRAMS PER SECOND. ON THE PART OF THE MACHINE THE LOAD OF THE MATERIAL, THERE ARE 2 DAMPERS. THIS PREVENTS THE OVERLOADING OF THE TURBINE AND THE BLOCK OF MATERIAL, BECAUSE WHEN I RELASE THE PEDAL, FIRST I BLOCK THE FLOW OF MATERIAL AND THEN THE AIR FLOW. THE PARTICULAR SHAPE OF THE OUTLET PIPE ALLOWS TO FILL THE PILLOWS THAT HAVE AIR-TIGHT LINING. THE TURBINE IS MADE OF A CAST ALUMINUM. THE COMMAND TO THE DUMPERS IS GIVEN BY A PEDAL, SO THE OPERATOR HAS BOTH HANDS FREE. THE APPLICATION OF THE GRIPPERS ON THE OUTLET PIPE OF THE FILLER R 3PV ALLOWS A SINGLE OPERATOR TO USE MORE FILLERS. FURTHERMORE, IT IS POSSIBLE CHANGE THE TIME THAT THE GRIPPERS STAY CLOSED. THIS ALLOWS TO SET THE AMOUNT OF MATERIAL TO PUT INSIDE HE PILLOW, WITH A GOOD PRECISION. THE TIME IS ADJUSTABLE TO FILL DIFFERENT KINDS OF PILLOWS WITH DIFFERENT AMOUNTS OF MATERIAL. QUANTITY: 1 Learn More

WITH SPECIAL DEVICE TO FIX THE COVER AND ELECTRONIC TABLE WITH BALANCE IT IS A MACHINE FOR FILLING CUSHIONS, SACS, BAGS ETC. WITH ALL KIND OF MATERIALS: FEATHER, POLYESTER, BALL FIBER, POLYURETHANE, COTTON, WOOL, ETC. ADJUSTABLE SPEED: UP TO 4000 RPM THE PARTICULAR SHAPE OF THE OUTLET PIPE ALLOWS TO FILL AIR-TIGHT LINING PILLOWS THE COMMAND TO THE DUMPERS IS GIVEN BY A PEDAL THANKS TO THE SPECIAL DEVICE TO BLOCK THE COVER, THE OPERATOR HAS BOTH HANDS FREE AND CAN WORK ON TWO POSITIONS AT A TIME WHEN THE LINE IS EQUIPPED WITH TWO FILLING MACHINES (AS PER DRAWING BELOW) CONTROL PANEL SPECIAL SEWING MACHINE Learn More

REFERENCE NUMBER: M-5158 (1212CVPGXX11) L COMPLETE TERRY WEAVING PLANT 1 WEST POINT DIRECT WARPER WORKING WIDTH 1.8M, FLANGE DIAMETER BEAM OUTPUT 940 MM, PRESSURE ROLLER 1 WEST POINT V-CREEL, 504 ENDS, 504 SPARE ENDS, PITCH 400 MM, WP ELECTRO SENSE 1 WEST POINT DIRECT WARPER, WORKING WIDTH 1.8M, FLANGE DIAMETER BEAM OUTPUT 940 MM, PRESSURE ROLLER 1 WEST POINT V-CREEL, 640 ENDS, 640 SPARE ENDS, PITCH 450 MM, WP ELECTRO SENSE 1 WEST POINT SIZING UNIT, 10 POSITION CREEL, WORKING WIDTH 1.8M, DIAMETER 940 MM SINGLE SIZE BOX, ROLLER WIDTH 1.8 M, SINGLE SQUEEZING 10 DRYING CYLINDERS, TEFLON COATED, PARRAFIN WEST POINT HEAD STOCK, WORKING WIDTH 2.7 M, FLANGE 1250 MM 1 WEST POINT SIZING UNIT, 10 POSITION CREEL, WORKING WIDTH 1.8M, DIAMETER 940 MM SINGLE SIZE BOX, ROLLER WIDTH 1.8 M, SINGLE SQUEEZING 8 DRYING CYLINDERS, 7 TEFLON COATED, PARRAFIN WEST POINT HEAD STOCK, WORKING WIDTH 3.0 M, FLANGE 1250 MM 1 WEST POINT SIZING UNIT, 8 POSITION CREEL, WORKING WIDTH 1.8M, DIAMETER 940 MM SINGLE SIZE BOX, ROLLER WIDTH 1.8 M, SINGLE SQUEEZING 7 DRYING CYLINDERS, 6 TEFLON COATED, PARRAFIN WEST POINT HEAD STOCK, WORKING WIDTH 2.7 M, FLANGE 1250 MM 1 SIZE KITCHEN , 5 STAINLESS STEEL MIXING TANKS WITH HEATING 7 MOTOCONO REMAIN WINDERS, 4 POSITIONS EACH 1 WARP BEAM STORAGE, 6 ROWS, 4 LEVELS, 14 M LENGTH 3 SHELVES SINGLE SIDED, 2 SHELVES DOUBLE SIDED WITH HUBTEX WARP BEAM LIFTER, MODEL 20TS 62 SULZER TERRY PROJECTILE LOOMS WITH JACQUARD (8) MODEL P7100 B330 F4 EP J D1, YEAR 4X 1989, 2X 1990, 2X 1991 WORKING WIDTH 3,3 M / 130” (7) STAUBLI E-JACQUARD CX-870, YEAR 1998-2004, 2688 HOOKS, CONTROLLER JC-5 (1) STAUBLI E-JACQUARD CX-860, YEAR 1997, 2688 HOOKS, CONTROLLER JC-4 (M/C 1989) GROUND AND PILE WARP BEAM 940 MM DIAMETER (2) MODEL P7200 B330 F4 J Q D1, YEAR 1X 1991, 1X 1995 WORKING WIDTH 3,3 M / 130” STAUBLI E-JACQUARD CX-870, YEAR 2004, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (6) MODEL P7100 B330 F4 J D1, YEAR 1X 1991, 1X 1992, 4X 1994 WORKING WIDTH 3,3 M / 130” (4) STAUBLI E-JACQUARD CX-860, YEAR 1994, 2688 HOOKS, CONTROLLER JC-4 (2) STAUBLI E-JACQUARD CX-870, YEAR 2004, 2688 HOOKS, CONTROLLER JC-5 (M/C 1990/91) GROUND AND PILE WARP BEAM 940 MM DIAMETER (4) MODEL P7250 B330 F4 J D1, YEAR 2X 2000, 2X 2001 WORKING WIDTH 3,3 M / 130” STAUBLI E-JACQUARD CX-870, YEAR 2X 2001, 2X 2004, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (5) MODEL P7100 B390 F4 EP J D1, YEAR 1X 1991, 1X 1992, 2X 1994, 1X 1995 WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-870, YEAR 2003/2004, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940 MM DIAMETER (1) MODEL P7100 B390 F4 EP J D1, YEAR 1992 WORKING WIDTH 3,9 M / 153” SCHLEICHER MECHANICAL JACQUARD 3-08, YEAR 1990, 896 HOOKS CAM MOTION, 6 LEVERS INSTALLED, 4 FRAMES GROUND AND PILE WARP BEAM 940 MM DIAMETER (4) MODEL P7100 B390 F4 EP J D1, YEAR 1X 1992, 3X 1994 WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1602, YEAR 2006/2008, 3072 HOOKS, CONTROLLER JC-6 GROUND AND PILE WARP BEAM 940 MM DIAMETER (6) MODEL P7100 B390 F4 EP J D1, YEAR 1X 1992, 4X 1993, 1X 1994 WORKING WIDTH 3,9 M / 153” STAUBLI MECHANICAL JACQUARD CR-520S, YEAR 1993/94, 1344 HOOKS GROUND AND PILE WARP BEAM 940 MM DIAMETER (1) MODEL P7100 B390 F4 EP J D1, YEAR 1994, WORKING WIDTH 3,9 M / 153” STAUBLI MECHANICAL JACQUARD CR-520, YEAR 1995, 1344 HOOKS GROUND AND PILE WARP BEAM 940 MM DIAMETER (2) MODEL P7100 B390 F4 EP J D1, YEAR 1995, WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1600, YEAR 2006, 3072 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940 MM DIAMETER (4) MODEL P7100 B390 F4 J D1, YEAR 1995 , WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-860, YEAR 1996, 2688 HOOKS, CONTROLLER JC-4 GROUND AND PILE WARP BEAM 940 MM DIAMETER (1) MODEL P7100 B390 F4 J D2, YEAR 1995 , WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-960, YEAR 1996, 3072 HOOKS, CONTROLLER JC-4 GROUND AND PILE WARP BEAM 940 MM DIAMETER (8) MODEL P7200 B390 F4 J Q D1, YEAR 6X 1996, 2X 1997, WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD CX-870, YEAR 1998, 2688 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (8) MODEL P7250 B390 F4 J D1, YEAR 6X 1997, 2X 1998 , WORKING WIDTH 3,9 M / 153” (4) STAUBLI E-JACQUARD LX-1600, YEAR 2000, 3072 HOOKS, CONTROLLER JC-5 (M/C 1997) (4) STAUBLI E-JACQUARD CX-870, YEAR 2000/01, 2688 HOOKS, CONTROLLER JC-5 (M/C 1997/98) GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (1) MODEL P7250 B390 F4 J D2, YEAR 1999 , WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1600, YEAR 2002, 3072 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER (1) MODEL P7250 B390 F4 J D3, YEAR 1999, WORKING WIDTH 3,9 M / 153” STAUBLI E-JACQUARD LX-1600, YEAR 2002, 3072 HOOKS, CONTROLLER JC-5 GROUND AND PILE WARP BEAM 940/1250 MM DIAMETER ALL MACHINES WITH 4 COLORS, AVERAGE 3 WEFT FEEDERS (ROH CHRONO HS AND SIMILAR), MIN. 3 CENTRAL TUCK IN UNITS PER MACHINE, SIDE TUCK IN UNITS, USTER LOOM DATA E-JACQUARD M/C WITH ELECTRONICALLY CONTROLLED COLOR SELECTION (EXCEPT 8 MECHANICAL M/CS) SPLIT BEAM EXECUTION, 1.5 PILE BEAMS, 1.5 GROUND BEAMS ON-LOOM TAKE-UP, 1.5 CLOTH ROLLS, 4 WEFT FEEDERS, 4 DROP WIRE BARS APPROX. 9000 DROP WIRES AND 4500 HEDDLES, LOOMDATA APPROX. 80% PLATINES INSTALLED STARTES OR STAUBLI HARNESS, ONE LIETTY GANTRY FOR TWO MACHINES LOOM POWER 5 OR 6 KW, JACQUARD POWER 2 KW 5 TONELLO AT GARMENT WASHING AND BLEACHING MACHINES MODEL G510, YEAR: 1 X 2002, 2 X 2003, 1 X 2004, 1 X 2007, TEMPERATURE 98C , CAPACITY 500 KG.EACH, TONELLO CONTROLS DIRECT STEAM OPERATED, CURRENTLY ALL ARE CONNECTED TO A CENTRAL DOSING SYSTEM (BUT EACH HAS ITS OWN DOSING SYSTEM AND CAN WORK AS INDEPENDENT M/C) FULL DRUM (NOT DIVIDED), 4 WATER ENTRIES AND 2 DRAINING OPENINGS CAPABLE OF WASHING, BLEACHING AND WATER EXTRACTION, HEAVY DUTY (SUITABLE FOR JEANS) 1 TONELLO AT GARMENT WASHING AND BLEACHING MACHINES MODEL G1 50 HS, YEAR 2007, TEMPERATURE 98°C, CAPACITY 50 KG. TONELLO CONTROLS, DIRECT STEAM OPERATED, AIR PRESSURE 7 BAR, HYDRAULICS 3 BAR, STEAM 10 BAR, FULL DRUM (NOT DIVIDED), 4 WATER ENTRIES AND 2 DRAINING OPENINGS CAPABLE OF WASHING, BLEACHING AND WATER EXTRACTION, HEAVY DUTY (SUITABLE FOR JEANS) 2 TRIVENETA GARMENT DRYERS, TYPE E550 PV YEAR 2001 MODEL 550 P CAPACITY 500 KG. EACH, DRYING CYCLE TIME IS HALF OF THE TONELLO = EACH MACHINE CAN SERVE 2 TONELLO MACHINES - SEMI AUTOMATIC LOADING AND DISCHARGING, STEAM OPERATED ITEMIZED SALE IS POSSIBLE – AGAINST OFFERS AVAILABLE IMMEDIATELY – STOPPED ON MILL FLOOR Learn More

REFERENCE NUMBER: M-4608 (11116SWJK10R) L VILLARS-SANTEX HOTMELT POWDER SCATTERING AND LAMINATING MACHINE YEAR 1993 WIDTH 2100mm LAMINATING LINE MANUFACTURER: VILLARS (CH) ACTUALLY SANTEX YEAR OF CONSTRUCTION: 1993 WORKING WIDTH: 2200mm (NOMINAL WIDTH 2100mm) OPERATING VOLTAGE: 3X380(400)V TOTAL POWER: 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION: INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997): 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS: 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED. ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM MANUFACTURER: MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR OF CONSTRUCTION: 1999 OPERATING VOLTAGE: 3X380V CAPACITY ACCUMULATOR: +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE MANUFACTURER: MENZEL YEAR OF CONSTRUCTION: 2000 OPERATING VOLTAGE: 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT. KNOWN PROBLEM: PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) MISCELLANEA SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS CAN BE INSPECTED BUT NOT IN PRODUCTION MACHINE WILL BE DISMANTLED AT END OF NOV 2014 QUANTITY AVAILABLE: 1 Learn More

TT-8285 POWER BARGE, 16.2MW EACH (TOTAL 120MW), YEAR 1998, 50Hz TECHNICAL DETAILS LIKE LENGTH, WIDTH, DEPTH OF THE BARGE: L= 96540mm, B= 30480mm DEPTH = 6090mm YEAR OF BUILT: 1998 SINGLE BARGE: YES Learn More

TT-8234 SIEMENS CORE SGT300 ENGINE, 7.9MW, YEAR 2020 CONDITION FULLY OVERHAULED & ZERO HOURED QUANTITY: 1 Learn More