Search results for: 'Sha'

YY-2424 USED NGR REGRANULATION LINE for BOPP FILM, FLUFF, LUMPS, MDO WASTE 900 TO 1000 KG PER H OVERCONSUMPTION: 500 KW OUTPUT: 1000 KGS PER HOUR INTENDED FOR THE FOLLOWING WASTE: OUTPUT; BOPP FILM, FLUFF, LUMPS, MDO WASTE: 900 TO 1000 KG/H; CPP FILM, FLUFF, LUMPS: 900 TO 1000 KG/H; PERFORMANCE IS PROVIDED FOR REFERENCE ONLY. THE CAPACITY OF THE DEVICE DEPENDS ON THE PROPERTIES OF THE MATERIAL, E.G. MOISTURE CONTENT, PRINTING, WEIGHT, MELT INDEX, CONTAMINATION AND DEGREE OF FILTRATION. AVERAGE POWER CONSUMPTION: 500 KW; AVERAGE COOLING WATER DEMAND: 668 L/MIN; AVERAGE FRESH WATER CONSUMPTION: 34 L/H; MAXIMUM COMPRESSED AIR CONSUMPTION: 100 L/MIN. THE VALUES GIVEN ABOVE ARE ONLY REFERENCE VALUES AND MAY DIFFER FROM THE VALUES FINAL VALUES OBTAINED AFTER CALIBRATION OF THE DEVICE. THIS DATA SHOULD NOT BE USED FOR PLANNING. Learn More

T-9889 LIBA RASCHEL WARP KNITTING MACHINES, YEAR 1980 TO 1989 ITEM 001 LIBA RASCHEL WARP KNIT MACHINE QUANTITY: 4 ITEM 002 LIBA RASCHEL WARP KNIT MACHINE QUANTITY: 1 ITEM 003 LIBA RASCHEL WARP KNIT MACHINE QUANTITY: 8 ITEM 004 LIBA RASCHEL WARP KNIT MACHINE QUANTITY: 1 ITEM 005 LIBA RASCHEL WARP KNIT MACHINE QUANTITY: 2 AVAILABLE IMMEDIATELY Learn More

J-4564 5 KILO SAMPLE SOFT FLOW MACHINE CAPACITY 5 TO 10 KILO MATERIAL CONSTRUCTION [HTHP-VESSEL] 316 L 5 mm THICKNESS PUMP SS 316 – MOTOR HP 3 HP – 1500 RPM DIAMETER OF VESSEL 1150 mm TOTAL LENTGH 2200 mm TOTAL WIDTH 3900 mm MAXIMUM WORKING HIGH TEMP. 135° C MAXIMUM WORKING PRESSURE 3 KG/ cm2 TUBE 1 TUBE SIZE DIAMETER 200 mm NOZZLE SIZE [OVERFLOW FIX ] DIAMETER 190 mm X 168 mm INSIDE WINCH (HP) 1 HP X 1 FOR FULLY AUTO COLOR TANK INJECTION PUMP 1 HP/3000 RPM UNLOADING WINCH 1 HP /200RPM GEAR BOX COLOR TANK (LITERS) 20 LITERS X 2 PIECES FILL (AUTO) DIAMETER 1.5” X 2 DRAIN [ AUTO] DIAMETER 1.5 ” X 2 OVER FLOW [AUTO] DIAMETER 1.5” X 1 HEAT [ AUTO] DIAMETER 1” COOL [ AUTO] DIAMETER 1” LIQUOR RATIO 1: 5 TO 1 : 7 [ DEPEND ON FABRIC] QUANTITY: 1 Learn More

REFERENCE NUMBER: J-1825
HIGH SPEED COMPUTERIZED CHAIN STITCH MULTI-NEEDLE QUILTING MACHINE, NEW - 1200 RPM

QUILTING WIDTH: 2450mm (96 INCHES)
CAPACITY: 60 TO 300 METERS PER HOUR
STITCH LENGTH: 3 TO 7mm
QUILTING THICKNESS: ≤80mm
NEEDLE BAR DISTANCE: 1 x 3 x 6
NEEDLE DISTANCE SIDEWAYS: 25.4mm (ONE INCH)
X-AXIS MOVEMENT DISPLACEMENT: 304.8mm (12 INCHES)
NEEDLE TYPE: 24/180 23/160 22/140 21/130
MAIN SHAFT SPEED: 500 TO 1200 RPM
VOLTAGE: 380V/50Hz, 220V/60Hz, 3-PHASE
POWER: 7 KW
DIMENSIONS: 5400 x 1650 x 2050mm
WEIGHT: 4800 KG

CONTROLS BASED ON WINDOWS, CAD DRAWING
CONTINUOUS PATTERNS AND TACK & JUMP PATTERNS (360° AND 180°) ARE AVAILABLE
DELTA VFD (VARIABLE FREQUENCY DRIVER) DRIVES MAIN SHAFT (Z SHAFT)
PANASONIC SERVO DRIVER & MOTOR CONTROL THE SADDLE (X SHAFT) AND ROLLER (Y SHAFT)
AUTOMATIC STOP WHEN UP OR BOTTOM THREAD IS BROKEN
BOTH UP AND DOWN SAFETY INFRARED PROTECTION

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-3307

VAMATEX DYNA TERRY RAPIER and PICANOL AIRJET TERRY LOOMS

 

3 PICANOL

TYPE: TERRY PLUS

AIRJET TERRY LOOMS

YEAR: 2005 to 2006

CONDITION: ALMOST NEW

 

3 VAMATEX

TYPE: DYNA TERRY

RAPIER WEAVING MACHINES FOR TERRY FABRICS

YEAR: 2007

REED WIDTH: 2600mm

DOBBY FIMTESILE 7P, 20 SHHAFTS

8 COLORS

4 BEAMS 800+1000mm

2650 DROPPERS

6 PRE FEEDERS

2 CLOTH ROLLERS

16 HEALD FRAMES

 

3 PICANOL

TYPE: TERRY PLUS

AIRJET TERRY LOOMS

2 DOBBY and 1 JACQUARD

 

PICANOL

TYPE: TERRY PLUS 800-6-R

AIRJET LOOMS

YEAR: 2005

REED SPACE: 2600mm

6 COLORS

6 PICANOL 1131 CAN PLUS WEFT ACCUMULATORS

STAUBLI DOBBY TYPE 2861-16K FOR 16 SHAFTS

14 SHAFTS PROVIDED – DRC30 DRIVE HARNESS CONNECTION

ELSY ELECTRONIC SELVEDGE SYSTEM

PFT (PROGRAMMABLE FILLING TENSIONER) and PSO (PRE-WINDER SWITCH OFF)

GROUND WRAP BEAM 805mm DIAMETER

PILE WARP BEAM 1000mm DIAMETER

1 GROUND WARP BEAMS, TYPE 190

1 PILE WARP BEAM

2 ADAPTERS

1 CLOTH ROLLER

APPROXIMATELY 5000 DROPPERS, 5000 HEALD WIRES

380 VOLTS, 50 HERTZ

 

PICANOL

TYPE: TERRY PLUS 800-6-R

AIRJET TERRY LOOM

YEAR: 2006

REED SPACE: 2300mm

6 COLORS

6 WEFT ACCUMULATORS

STAUBLI DOBBY TYPE 2861-A6K FOR 16 SHAFTS

14 SHAFTS PROVIDED – DRC DRIVE HARNESS ONNECTION

ELSY ELECTRONIC SELVEDGE SYSTEM

PFT (PROGRAMMABLE FILLING TENSIONER) and PSO (PRE-WINDER SWITCH OFF)

GROUND WARP BEAM 805mm DIAMETER

PILE WARP BEAM 1000mm DIMAETER

1 GROUND WARP BEAM 805mm, TYPE 190

1 PILE WARP BEAM

2 ADAPTERS

1 CLOTH ROLLER

380 VOLTS, 50 HERTZ

 

PICANOL

TYPE: TERRY PLUS 800-8-J

AIRJET LOOMS

YEAR: 2006

REED SPACE: 2600mm

6 COLORS, 6 WEFT ACCUMULATORS

STAUBLI ELECTRONIC JACQUARD TYPE LX1602 FOR 3072 HOOKS AND HARNESS WITH SPRINGS AND 5756 ENDS

LIETTI STEEL JACQUARD GANTRY

ELSY ELECTRONIC SELVEDGE SYSTEM

PFT (PROGRAMMABLE FILLING TENSIONER) and PSO (PRE-WINDER SWITCH OFF)

GROUND WARP BEAM 805mm DIAMETER

PILE WARP BEAM 1000mm DIAMETER

1 GROUND WARP BEAM 805mm DIAMETER

1 PILE WARP BEAM 1000mm DIAMETER

2 ADAPTERS FOR WORKING FROM BEAMS, TYPE 190

1 CLOTH ROLLER

APPROXIMATELY 5000 DROPPERS

 

3 VAMATEX

TYPE: DYNA-TERRY

RAPIER WEAVING MACHINES FOR TERRY FABRICS

YEAR: 2007

REED WIDTH: 2600mm

DOBBY FIMTESILE 7P-20 SHAFTS

8 COLORS

4 BEAMS 800+1000mm

6250 DROPPERS

6 PRE FEEDERS and 2 CLOTH ROLLERS

16 HEALD FRAMES

 

QUANTITY: 15

Learn More

REFERENCE NUMBER: M-1480

SLITTER REWINDER 1800mm WIDTH AND 1000mm DIAMETER-NEW MACHINE

 

TECHNICAL CHARACTERISTICS:

 

UNWINDER

MAXIMUM WIDTH: 1800mm

MAXIMUM DIAMETER: 1100mm

MINIMUM WIDTH: 420mm

MAXIMUM WEIGHT: 300kgs

CORE ID: 3”

 

REWINDER:

MAXIMUM WIDTH: 1800mm

MAXIMUM DIAMETER: 1000mm

MINIMUM WIDTH: 100mm

MAXIMUM WEIGHT PER SHAFT: 300kgs

CORE ID: 3”

 

MATERIAL:

TYPE: 100% PP NONWOVEN

MINIMUM: 10gsm

MAXIMUM: 150gsm

 

TENSION:

MAXIMUM: 2 PLI

 

SPEED:

METERS PER MINUTE: 250

 

DESCRIPTION:

REWINDER MACHINE FOR NONWOVEN ROLLS: UP TO 1000 mm DIAMETER AT UNWINDER AND 1200 mm AT REWINDER.

THE WORKSTATION OFFERS EASY ACCESS TO THE TENSION CONTROL AREA AS WELL AS THE TRIMMING AREA; THIS WAY, ANY MODIFICATION ON THE MATERIAL MEASUREMENTS CAN BE DONE SAFELY.

THE WORKSTATION WILL DELIVER MODULES OF ROLLED MATERIAL WITH SPECIFIC DENSITY, AND SEPARATED FROM EACH OTHER IN ORDER TO KEEP OPERATION CONDITIONS WITHIN REQUIRED QUALITY CONTROLS.

 

UNWINDER WITH SHAFT:

THERE IS A CENTRAL UNWINDING SYSTEM SUPPORTED BY A 3” STEEL EXPANSION SHAFT.

THERE IS A TENSION CONTROL SYSTEM THAT WORKS THROUGH A PNEUMATIC DISK BRAKE WITH A REPLACEABLE PADS SYSTEM.

THE UNWINDER HAS A PIVOTABLE ROLLER SYSTEM WHEREBY TENSION MAY BE MODIFIED ON ONE END TO REDUCE TENSION DIFFERENCE ON MATERIAL IF NECESSARY.

THE SAFETY CHUCK HAS A MECHANICAL MOVEMENT SYSTEM FOR SHAFT INSERTION.

THE UNWINDER HAS AN ULTRASONIC OR LASER SENSOR FOR A REAL MEASURING OF ROLL DIAMETER. THIS INFORMATION WILL HELP TO KEEP A SPECIFIC TENSION ON MATERIAL DURING ALL THE PROCESS.

 

CUTTING:

THE LONGITUDINAL SHEAR CUT SYSTEM GUARANTEES CLEAN AND SAFE TRIMMING AT EVERY MODULE. THE CUTTING SYSTEM ADAPTED TO THE MAIN TRANSMISSION GUARANTEES AN OVER SPEED THAT MAY BE REGULATED ACCORDING TO THE MATERIAL DURING EVERY STAGE OF PROCESS. THE PNEUMATIC ACTIVATION KNIVES WILL ALLOW A FAST MODIFICATION OF THE CUTTING MEASUREMENTS.

THIS ROLLER IS LOCATED AT AN EASY ACCESS AREA FOR THE OPERATOR TO BE ABLE TO MAKE CHANGES ON THE CUTTING WIDTH SAFELY. THE COUNTER KNIVES ARE ASSEMBLED TO THE ROLLER BY 3 SETSCREWS THAT FIX THEIR POSITION ON THE ROLLER. THE COUNTERKNIVES HAVE TWO FACES, SO WHEN THE FIRST FACE HAS AN IMPORTANT WEAR, IT WILL BE REMOVED FROM THE ROLLER AND THE NEW FACE WILL BE PLACED INSTEAD. THIS WILL EXTEND THE LIFESPAN OF THIS IMPORTANT COMPONENT.

SHEAR CUT KNIVES: THERE IS AN ADJUSTMENT MECHANISM TO PLACE THEM ON THE COUNTER KNIFE AND TO ADJUST THE CUTTING LOAD ACCURATELY. THE COUNTER KNIVES ARE SUPPORTED TOWARDS THE ROLLER IN ORDER TO OBTAIN A CUTOFF. THE SPEED ON THIS SYSTEM IS AN OVER SPEED IN RELATION TO THAT OF THE MATERIAL, IN ORDER TO GENERATE A CLEAN CUT.

LONGITUDINAL SHEAR CUT: PNEUMATIC ACTIVATION.

COUNTER KNIVES ROLLER WITH 3 SUPPORT PLANES FOR THE COUNTER KNIVES; 120° DISPLACEMENT FROM EACH OTHER.

19 SLITTERS ARE INCLUDED.

 

REWINDER:

PERIPHERAL REWINDER FOR NONWOVEN. THIS SYSTEM HAS A COUPLE OF MAIN ROLLERS WHERE THE MATERIAL ROLL IS FORMED.

THIS SYSTEM HAS LINEAR GUIDES FOR COMPACTION THROUGH WICH A NIP IS OBTAINED ON THE MATERIAL. THE REWINDER WILL HAVE A TRANSMISSION BASED ON A VECTORIAL-TYPE MOTOR ADAPTED TO A CYCLOIDAL REDUCER. THE TRANSMISSION HAS A MECHANICAL TORQUE CONTROL SYSTEM TO CONTROL THE TORQUE DIFFERENTIAL BETWEEN MAIN ROLLS.

THIS SYSTEM WILL HAVE A 3” EXPANSION SHAFT WHERE THE CARDBOARD CORES WILL BE INSERTED AND THE MATERIAL ROLLS WILL BE FORMED.

 

FABRIC OPENING SYSTEM:

THIS SYSTEM IS BASED ON A VARIABLE CURVATURE SYSTEM BY A CENTER KNOB AND IT IS A BAR- TYPE SYSTEM. THIS KNOB IS THERE TO CONTROL THE CURVATURE OF THE BAR WHERE MATERIAL SLIDES THROUGH. THE SLIDING BAR IS MADE OUT OF AN ULTRA LOW FRICTION MATERIAL IN ORDER TO GENERATE A SMOOTH SLIDING OF MATERIAL WITHOUT ANY TENSION ADDED. THIS WILL REDUCE WRINKLES IN A SIGNIFICANT WAY.

 

AUTOMATIC TENSION SYSTEM:

THERE IS AN OPEN LOOP AUTOMATIC TENSION CONTROL SYSTEM WITH A SENSOR FOR DIAMETER MEASURING. BY THIS SYSTEM, A REAL VALUE OF DIAMETER IS OBTAINED AT THE REWINDER. PRESSURE OF PNEUMATIC BRAKE VARIES DURING PROCESS.

 

MANUAL POSITIONING (OPTIONAL):

THE MANUAL POSITIONING SYSTEM IS BASED ON THE POSITION CONTROL OF THE COUNTER KNIVES. THE MODULE IS POSITIONED AT A DESIRED CUTTING PARAMETER AND THE COUNTER KNIFE WILL PHYSICALLY COME ACROSS IT. THE REAL POSITION OF MODULE WILL BE SHOWN ON A SCREEN THAT OPERATOR WILL BE CONSTANTLY SUPERVISING. THIS SCREEN WILL SHOW THE REAL MEASUREMENTS OF THE CARRIAGE IN RELATION TO THE LAST ONE OR AS AN ABSOLUTE REFERENCE. OPERATOR WILL BE ABLE TO RESET THE MEASUREMENT ONCE THE COUNTER KNIFE IS REPLACED AND WILL REPEAT THIS PROCESS EVERY TIME A COUNTER KNIFE IS POSITIONED.

A DISPLAY WILL SHOW THE DESIRED POSITION IN MILLIMETERS OR INCHES.

THIS SYSTEM CAN SHOW MEASUREMENT IN AN EITHER ABSOLUTE OR INCREASING WAY.

POSITION TOLERANCE: +/- 0.30 mm.

THE POSITIONER IS INSTALLED ON A SUPPORT THAT WILL BE LOCATED ON THE REWINDER BENCHES. THEREFORE, THERE WILL BE AN EASY ACCESS TO SYSTEM AND AN EASY REPETITION OF POSITIONING PROCESS.

 

UNLOADING ROLL TABLE:

A HYDRAULIC PIVOTEABLE TABLE WILL HAVE AS MAIN FUNCTION THE UNLOADING OF FINISHED ROLLS THAT THEN WILL BE LOCATED ON FLOOR LEVEL. THIS SYSTEM WILL EJECT THE ROLL AND THEN IT WILL BE RECEIVED AT THE PIVOTING TABLE FOR AN EFFICIENT UNLOADING.

THE UNLOADING TABLE WILL ALSO WORK AS A PROTECTION FOR THE OPERATOR.

THIS EQUIPMENT WILL HAVE SECURITY CURTAINS AT FRONT TO KEEP OPERATOR FROM ENTERING THE REWINDING AREA. THERE WILL BE AN EMERGENCY STOP BUTTON OR WIRE WHERE OPERATOR WORKS AND WILL ALSO HAVE PHYSICAL PROTECTION WITH SECURITY SWITCHES AT CUTTING AREA.

 

CONTROL:

HMI CENTRAL CONTROL SYSTEM WITH TOUCH SCREEN TO PROGRAM THE OPERATION CYCLE AND ALL THE MATERIAL CHARACTERISTICS. OPERATOR WILL HAVE ACCESS TO ALL OPERATION PARAMETERS IN ORDER TO BE ABLE TO MAKE CHANGES ON THE EQUIPMENT OPERATION CONDITIONS, AND THEREFORE OBTAIN MATERIAL ROLLS WITH SPECIFIC DENSITIES.

TRANSMISSION: VECTORIAL MOTO REDUCER WITH 1000:1 TORQUE.

DIGITAL METER COUNTER WITH DISPLAY AND AUTOMATIC STOP AT DEFINED DISTANCE.

 

DOCUMENTS INCLUDED:

THE MACHINE WILL BE DELIVERED WITH THE FOLLOWING DOCUMENT:

OPERATION MANUAL

MAINTENANCE MANUAL

SAFETY MANUAL

ELECTRIC DIAGRAMS

CONTROL SYSTEM MANUAL

PLC BACKUP

REQUIREMENTS:

ELECTRIC 15 KW, 440 VAC, TRI PHASE.

PNEUMATIC 6 BAR - 60 LTS. / MIN.

 

DUCTS AND WIRING:

DUCTS AND WIRES RUNNING FROM UTILITIES SOURCES TO THE CONTROL PANEL AND FROM THE CONTROL PANEL TO THE MACHINE WILL BE AT CUSTOMER COSTS AND MUST BE DONE ACCORDING TO THE INSTRUCTIONS SHOWN IN OUR DIAGRAMS

 

SIEMENS PLC

Learn More

REFERENCE NUMBER: M-4444 (10101NVBZFD9RF) K LOT OF VAMATEX LOOMS WIDTH 2100mm AND SULZER G6500 WIDTH 2200mm 22 VAMATEX RAPIER LOOMS MODEL LEONARDO , WIDTH 2100 , YEAR 2001, STAUBLI ELECTRONIC DOBBY , MODEL 2861 - 16 SHAFTS , ELECTRONIC LEFT & RIGHT SPLITZ ELECTRONIC WEFT SELECTOR 4 COLORS FOR 11 LOOMS , 8 COLORS FOR 11 LOOMS 1 VAMATEX RAPIER LOOMS MODEL LEONARDO SILVER HD, WIDTH 2100 , YEAR 2001, FIMTEXTILE ELECTRONIC DOBBY , MODEL RD3060 - 20 SHAFTS , ELECTRONIC LEFT & RIGHT SPLITZ ELECTRONIC WEFT SELECTOR 8 COLORS , ELECTRONIC WEFT CUTTING DEVICE 8 VAMATEX RAPIER LOOMS MODEL LEONARDO SILVER HS, WIDTH 2100 , YEAR 2006, FIMTEXTILE ELECTRONIC DOBBY , MODEL SR 6P – 20/16/16 SHAFTS , ELECTRONIC LEFT & RIGHT SPLITZ , ELECTRONIC WEFT SELECTOR 8 COLORS , ELECTRONIC WEFT CUTTING DEVICE 16 VAMATEX RAPIER LOOMS MODEL LEONARDO SILVER HS, WIDTH 2100 , YEAR 2006, STAUBLI ELECTRONIC DOBBY , MODEL 2670 – 20/16/16 SHAFTS , ELECTRONIC LEFT & RIGHT SPLITZ ELECTRONIC WEFT SELECTOR 8 COLORS , ELECTRONIC WEFT CUTTING DEVICE 1SULZER TEXTIL RAPIER LOOM , MODEL G 6500 , WIDTH 2200 , YEAR 2004 , STAUBLI ELECTRONIC DOBBY , MODEL 2670 – 20/16/16 SHAFTS , ELECTRONIC LEFT & RIGHT SPLITZ ELECTRONIC WEFT SELECTOR 8 COLORS , ELECTRONIC WEFT CUTTING DEVICE , ELECTRONIC WEFT BREAKER EQUIPMENT EACH LOOM : 14 HEALD FRAMES , 6000 HEDDLESS , 6000 DROP WIRES , 5 ROY WEFT FEEDERS , 2 WARP BEAMS , EXTERNAL – UNDER MINI BATCHER , + MANY SPARE PARTS DELIVERY : 12 LOOMS SEPTEMBER, 12 LOOMS OCTOBER, 12 LOOMS NOVEMBER , 11 LOOMS DECEMBER 2014. QUANTITY AVAILABLE: 48 Learn More

TT-7853 SIEMENS SGT600DLE GAS TURBINE - NEW, 50Hz, 25MW, YEAR 2011 1. SIEMENS SGT600DLE GAS TURBINE 2. MODEL: SGT600DLE 3. DUAL SHAFTS 4. EMISSION TYPE: DLE (DRY LOW EMISSION) 5. MADE IN SEWDEN 6. YEAR: 2011 QUANTITY: 1 Learn More

TT-6573 SIEMENS GAS TURBINE SGT600DLE, 25MW, YEAR 2011, 60Hz 1. SIEMENS GAS TURBINE 2. MODEL: SGT600DLE 3. DUAL SHAFTS 4. EMISSION TYPE: DLE (DRY LOW EMISSION) 5. MADE IN SEWDEN QUANTITY: 1 Learn More

YY-2073 COMPUTERIZED CHAIN STITCH NON-SHUTTLE MULTI-NEEDLE QUILTING MACHINE, QUILTING WIDTH 2450mm -PRODUCTION SPEED 60 TO 300 METERS PER HOUR DETAILS: TECHNICAL PARAMETERS DIMENSIONS (L X W X H): 5400 X 1650 X 2360mm GROSS WEIGHT: 5800 KG MAIN SHAFT SPEED: 500 TO 1300 RPM PRODUCTION SPEED: 60 TO 300 METERS PER HOUR STITCH LENGTH: 3 TO 8mm NEEDLE TYPE: 24/180, 23/160, 22/140, 21/130 SPACE BETWEEN NEEDLE ROWS: (50.8, 76.2, 127) 5″, (76.2, 76.2, 152.4) 6″ SPACE BETWEEN NEEDLES: 12.7 / 25.4mm MAXIMUM HORIZONTAL MOVEMENT: 304.8mm QUILTING WIDTH: 2450mm QUILTING THICKNESS: ≤80mm VOLTAGE: 220 VOLTS OR 380 VOLTS, 50/60Hz, 3-PHASE POWER: 11 KW QUANTITY: 1 Learn More