Search results for: 'las 5 s'

J-4496 EASTMAN RAPTOR 75X- 78X7-5 MACHINE IS PRACTICALLY NEW, ONLY RAN ABOUT 200 HOURS IN PERFECT RUNNING CONDITION AVAILABLE IMMEDIATELY MADE IN THE USA STANDARD EQUIPMENT RECIPROCATING STRAIGHT KNIFE WITH QUICK-REMOVAL CLAMP, 10 SPARE BLADES 2 AUTOMATED SHARPENING DISCS, 1 EXTRA SET OF DISCS INCLUDED (CHOICE OF: 60,80,100, OR 150 GRIT) Learn More

T-9487 BENNINGER SYNTHETIC SIZING MACHINE, WORKING WIDTH 2800mm, YEAR 2001 BENNINGER ZELL SIZING MACHINE YEAR: 2001 MODEL: BEN FULLSIZE TYPE: ZMF-WKD-KSA-TF-MLT-TF-TW-BBA SET UP AS A 1 BEAM TO 1 BEAM SIZING (NO SECTIONAL CREEL) WORKING WIDTH: 2800mm PRODUCTION SPEED 0.14 TO 125 METERS PER MINUTE QUANTITY: 1 Learn More

AA-1194 FIBER LASER MACHINE FOR PAD PRINTING AND BOARD MAKING BOARD MATERIAL: ALUMINUM, CARBON STEEL AND STAINLESS STEEL. THE BEST ONE IS ALUMINUM BOARD DIMENSIONS (L x W x H): 820mm x 570mm x 1400mm POWER SUPPLY: 220V/10A 50Hz OR 60Hz Learn More

AA-1189 CONTAINER LOADING CRANE TECHNICAL PARAMETERS: TYPICAL QUAYSIDE CRANE 1. A: GANTRY SPAN: 15000 TO 35000mm 2. C: BACKREACH: 0 TO 25000mm 3. E: CLEARANCE UNDER SILL BEAM: 12000 TO 18000mm 4. G: TRAVEL WHEEL GAUGE: 18200mm 5. H: BUFFER TO BUFFER: 27000mm 6. WHEEL SPACING: 1000 TO 2000mm 7. WHEELS PER CORNER (DEPENDS ON REQUIRED WHEEL LOADS): 6/12 – SEASIDE 8. WHEELS PER CORNER (DEPENDS ON REQUIRED WHEEL LOADS): 6/12 – LANDSIDE 9. MAX. WIDTH TROLLEY AND MAIN BEAM/BOOM: 7600mm Learn More

REFERENCE NUMBER: T-6857 DORNIER HTVS8/J-190 RAPIER LOOM, YEAR 1997, JACQUARD, WORKING WIDTH 1900mm DORNIER RAPIER LOOM TYPE HTVS8/J-190 YEAR OF CONSTRUCTION 1997 NOMINAL WORKING WIDTH 1900mm ELECTRONIC JACQUARD STAUBLI TYPE CX 960 YEAR OF CONSTRUCTION 1997 FORMAT 5120 WITH 4800 HOOKS INSTALLED 8 WEFT COLORS 4 WEFT FEEDERS IRO LASER ON SUPPORT BOBBIN CREEL ELECTRONIC LET-OFF AND TAKE-UP MOTOR GROB WARP DETECTION 4800 DROPPERS 1 WARP BEAM DISPLAY PANEL AT1 TAKE-UP SYSTEM OF THE WASTE SELVEDGE WASTE DUSTBIN BATCHING M IN EXCELLENT CONDITION QUANTITY: 1 Learn More

REFERENCE NUMBER: L-6069

EASTMAN STATIC TABLE CUTTING MACHINE MODEL M9000, 20’ X 72’, YEAR 2009

 

STATIC TABLE CUTTING MACHINE

MAKE: EASTMAN

MODEL: M9000

20 FEET LONG X 72 FEET WIDE

PURCHASED IN YEAR 2009

220 VOLT, 1 PHASE

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-4421

Learn More

REFERENCE NUMBER: L-5144

EREMA R160 VE LINE WITH LASERFILTER

 

1 X USED GRANULATION LINE EREMA RGA 160 VE  - PARTLY OVERHAULED AND FUNCTIONALLY TESTED

YEAR: 1994

PARTLY OVERHAULED IN OCTOBER OF 2016

CAPACITY KG/H - DEPENDING ON MATERIAL

Learn More

P-5094 JOPER CAST IRON ROASTER 120 KILOS

THE DURABLE, LONG LASTING RELIABILITY OF THE JOPER IS DUE TO ITS CAST IRON MATERIAL BUT ALSO DUE TO ITS DRUM AND COOLING DESIGN BUILT WITH DOUBLE WALLS AND STRONG BEARINGS. ITS HEAT OF CONVECTION TRANSFER PROVIDES A SMOOTH, EVEN RELIABLE ROAST. ITS SEPARATE CYCLONE PROVIDES SAFE EFFICIENT QUICK CHAFF REMOVAL. (PREVENTION FOR FIRE.)

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5665

CHOCOLATE/SUGAR POLISHING AND COATING MACHINE – CAPACITY 200KG

 

CHOCOLATE/SUGAR COATING & POLISHING MACHINE IS MAINLY USED FOR COATING THE SHELL FOR KINDS OF NUTS, BALL BUBBLE GUM, OR CHEWING GUM, AND SOME MEDICINE PILLS.

IT IS THE LAST PROCESSING STEP TO MAKE BALL TYPE PRODUCTS.

THE SPEED CAN BE ADJUSTED AND THE HOT AIR BLOWER WILL BE EQUIPPED ON THE MACHINE.

THE COATING BOWL IS MADE OF STAINLESS STEEL AND THE FRAME IS MADE OF NORMAL STEEL WITH PAINTING

 

MODEL 200

CAPACITY 200KG/POT

BLAST POWER: 0.02KW

DIAMETER OF POT: 1250mm

REV: 28R/MIN

HEATING POWER: 3KW

WEIGHT: 400KG

DIMENSION: 1200mm x 800mm x 1600mm

 

QUANTITY: 1

Learn More