Search results for: 'roller+p)())",...''

REFERENCE NUMBER: M-3973 (99016AVEZ8RX)-D HOTMELT POWDER SCATTERING AND LAMINATING MACHINE-2200mm 1.LAMINATING LINE : MAKE : VILLARS (CH) ACTUALLY SANTEX YEAR: 1993 WORKING WIDTH : 2200mm (NOMINAL WIDTH 2M10) VOLTAGE: 3X380(400)V TOTAL POWER : 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION : INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997) : 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS : 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED 2.ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM : MAKE : MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR: 1999 OPERATING VOLTAGE : 3X380V CAPACITY ACCUMULATOR : +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) 3. SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE : MAKE: MENZEL YEAR: 2000 OPERATING VOLTAGE : 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT KNOWN PROBLEM : PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) 4.MISCELLANEOUS : SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS Learn More

TT-8601 BENNINGER SLASHER INDIGO LINE, YEAR 2003 RECONDITIONED 2021 1. BENNINGER SLASHER INDIGO LINE 2. YEAR: 2003 RECONDITIONED 2021 3. RUNNING AT THE MOMENT IN PERFECT CONDITION Learn More

TT-8282 BEAM WINDER OF BEAM DYEING MACHINE, WIDTH 3660mm, WITH PAD FOULARD 1. WINDER OF BEAM DYEING MACHINE IS SUITABLE FOR RAW MATERIALS OF FABRIC SPOOLS OR A-SHAPED FRAMES. 2. IT UNDERGOES WIDENING FOR DE-CREASING WRINKLES, LASER ALIGNMENT, WATER TANK IMMERSION, WATER REMOVAL BY ROLLING, TENSION CONTROL, AND THE WINDING IS DONE ON THE AXIAL WINDING DRUM OR THE DEDICATED EQUIPMENT OF THE A-SHAPED FRAME. 3. MAIN PARAMETERS: 4. MATERIAL: STAINLESS STEEL 304 5. WIDTH OF FABRIC: 3660mm QUANTITY: 1 SET Learn More

TT-7989 RYOBI 756G XL-6-E, YEAR 2013 1. RYOBI 756G XL-6-E 2. YEAR OF MANUFACTURED 2013 3. BLANKET CLEANING CLOTH - UV 4. HIGH GRADE TYPE FEEDER QUANTITY: 1 Learn More

TT-7495 COMPLETE OPEN END SPINNING PLANT, 8432 ROTORS, YEAR 2017 TO 2019 PRODUCTION IN 24 HOURS X 30 DAYS NE 24: 2,000 TONS Learn More

TT-6389 AUTOMATIC NON-EMBOSSING REWINDING MACHINE, WIDTH 1800mm -FOR TISSUE PAPER OR TOILET PAPER QUANTITY: 1 Learn More

TT-3999 KUHNE 5-LAYER BLOWN FILM CO-EXTRUSION LINE, WIDTH 2000mm, YEAR 2012 KUHNE 5-LAYER BLOWN FILM CO-EXTRUSION LINE YEAR 2012 TYPE SELLING QUANTITY: 1 Learn More

TT-4887 KUSTERS 3 ROLLS THERMOBONDING CALENDER, WORKING WIDTH 3200mm, YEAR 1985 KUSTERS 3 ROLLS THERMOBONDING CALENDER BRAND: KUSTERS, GERMANY YEAR: 1985 USED QUANTITY: 1 Learn More

TT-4228 KUSTERS THERMOBONDING CALENDER, WORKING WIDTH 3200mm, YEAR 1985 THERMOBONDING CALENDER BRAND: KUSTERS 3 ROLLS YEAR: 1985 QUANTITY: 1 Learn More

TT-2959 CIBITEX CONTINUOUS OPEN WIDTH SANFORIZING MACHINE, WIDTH 2400mm, YEAR 2013 BRAND: CIBITEX / ITALY MODEL: HEATED PIPE YEAR: 2013 QUANTITY: 1 Learn More