Phone: +1 (864) 574-0404
Compare Products
  • Home
  • Search results for: 'High temperature high pressure Ma'

Search results for: 'High temperature high pressure Ma'

Items 141-150 of 170

Page
per page
Set Ascending Direction
Related search terms
High tempera
High temperat
High temperature
High temperature high p
HIGH PRES
  1. T-6546 PFE TESTER FOR PELLET FILTRATION EFFICIENCY OF SURGICAL MASK
    T-6546 PFE TESTER FOR PELLET FILTRATION EFFICIENCY OF SURGICAL MASK
    Compare
    REFERENCE NUMBER: T-6546
    PFE TESTER FOR PELLET FILTRATION EFFICIENCY OF SURGICAL MASK
     
    INTRODUCTION
    MEDICAL SURGICAL MASK PARTICLE FILTRATION EFFICIENCY PFE TESTER IS SUITABLE FOR MEDICAL INSTRUMENT INSPECTION CENTER, SAFETY PROTECTION INSPECTION CENTER, LABOR PROTECTION INSPECTION CENTER, DRUG INSPECTION CENTER, DISEASE PREVENTION AND CONTROL CENTER, TEXTILE INSPECTION CENTER, HOSPITAL, MASK AND RESPIRATOR MANUFACTURERS, ETC.
     
    FEATURES
    THE PFE TESTER FOR PARTICLE FILTRATION EFFICIENCY OF SURGICAL MASKS IS EQUIPPED WITH A SPECIAL SALT AEROSOL GENERATOR, WHICH CAN PRODUCE AEROSOLS WITH SPECIFIC PARTICLE SIZE AND CONCENTRATION.
    EQUIPPED WITH A SERIES OF SPECIAL FIXTURE, SUITABLE FOR THE DETECTION OF ALL KINDS OF MASKS.
    BUILT-IN HIGH LIFE PHOTOMETER MODULE, SAMPLING TIME ACCUMULATION, PROMPT LIGHT CLEANING.
    AUTOMATIC CONTROL OF AEROSOL GENERATION, AUTOMATIC CALCULATION OF CAPTURE EFFICIENCY AND MASK AIRFLOW RESISTANCE, REDUCE HUMAN INTERVENTION.
    BUILT-IN HIGH PRECISION ELECTRONIC FLOWMETER AND HIGH PERFORMANCE SAMPLING PUMP TO ENSURE FLOW STABILITY.
     
    PARAMETER
    TEST FLOW: PARAMETER RANGE: (5 ~ 100) L/MIN; RESOLUTION: (5 ~ 100) L/MIN;
    MAXIMUM ALLOWABLE ERROR: ±1%
    PRESSURE DETECTION RANGE: PARAMETER RANGE: (0 ~ 2500) PA; RESOLUTION: 0.1PA; MAXIMUM ALLOWABLE ERROR: ±1%
    CONCENTRATION DETECTION RANGE: PARAMETER RANGE: (0.001 ~ 100) 0 G/L;
    DETECTION ACCURACY: 1% OF THE READ VALUE IN THE RANGE OF 0.01% TO 100%
    DETECTION REPEATABILITY: 5% OF THE READ VALUE IN THE RANGE OF 0.01% TO 100% MEDIAN DIAMETER OF SALT AEROSOL PARTICLES (CMD): (0.075±0.02)
    MMEDIAN AEROSOL PARTICLE NUMBER DIAMETER (CMD) (OPTIONAL): (0.185±0.02) M
    OPERATING TEMPERATURE: 20±5C
    INSTRUMENT NOISE: <60DB(A)
    POWER SUPPLY: AC220V±10%, 50HZ
    MAIN MACHINE SIZE: (LENGTH 700 X WIDTH 720 X HEIGHT 1450) mm
     
    QUANTITY: 1
    Learn More
  2. TT-8593 GE TM2500GEN08 MOBILE GAS TURBINE GENERATOR, 10.5KV, YEAR 2025
    TT-8593 GE TM2500GEN08 MOBILE GAS TURBINE GENERATOR, 10.5KV, YEAR 2025
    Compare
    TT-8593 GE TM2500GEN08 MOBILE GAS TURBINE GENERATOR, 10.5KV, YEAR 2025 1. GE TM2500GEN08 2. YEAR: JUNE 2025 3. 10.5KV 4. DUAL FREQUENCY 5. DUAL FUEL 6. DRY LOW EMISSION 7. HOURS: 0 8. WARRANTY: ONE YEAR QUANTITY: 1 Learn More
  3. TT-5274 DILO HYPERPUNCH NEEDLE LOOM, TYPE DI-LOOM OD-II 12.5, WORKING WIDTH 1250mm, YEAR 2004
    TT-5274 DILO HYPERPUNCH NEEDLE LOOM, TYPE DI-LOOM OD-II 12.5, WORKING WIDTH 1250mm, YEAR 2004
    Compare
    TT-5274 DILO HYPERPUNCH NEEDLE LOOM, TYPE DI-LOOM OD-II 12.5, WORKING WIDTH 1250mm, YEAR 2004 BRAND: DILO NEEDLE LOOMS SPECIFICATIONS CONDITION: USED QUANTITY: 1 Learn More
  4. TT-2177 GAS BASED COMBINED CYCLE POWER PLANT, 116 MW, YEAR 2021
    TT-2177 GAS BASED COMBINED CYCLE POWER PLANT, 116 MW, YEAR 2021
    Compare
    TT-2177 GAS BASED COMBINED CYCLE POWER PLANT, 116 MW, YEAR 2021 GENERAL ELECTRIC GAS TURBINE GAS TURBINE MODEL NUMBER: GE, 6FAG QUANTITY: 1 Learn More
  5. YY-2359 DM55 HOT MELT DRUM UNLOADER
    YY-2359 DM55 HOT MELT DRUM UNLOADER
    Compare
    YY-2359 DM55 HOT MELT DRUM UNLOADER DM55 HOT MELT DRUM UNLOADER MELTS AND PUMPS HOT MELT FROM 55 GALLON DRUMS WITH SPEED AND ACCURACY. THIS IS TRULY A “MELT ON DEMAND” MACHINE MELTING ONLY THE HOT MELT THAT IS NEEDED FOR THE APPLICATION. IT HAS PRECISION TEMPERATURE CONTROLS AND VARIABLE SPEED GEAR PUMP OR HIGH OUTPUT PISTON PUMP. QUANTITY: 1 Learn More
  6. C-1171 MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE, YEAR 2000, WIDTH 3600mm
    C-1171 MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE, YEAR 2000, WIDTH 3600mm
    Compare
    REFERENCE NUMBER: C-1171 MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE, YEAR 2000, WIDTH 3600mm SPECIFICATIONS: MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC ROLLERS WIDTH: 3800 MM WORKING WIDTH: 3600 MM YOC: 2000 QUANTITY AVAILABLE: 1 Learn More
  7. M-0001 MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC 3600mm YEAR 2000
    M-0001 MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC 3600mm YEAR 2000
    Compare
    REFERENCE NUMBER: M-0001 MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC 3600mm YEAR 2000 MAKE: MEZZERA/RAMALLUMIN ROLLERS WIDTH: 3800mm WORKING WIDTH: 3600mm YEAR: 2000 QUANTITY AVAILABLE: 1 Learn More
  8. M-1487 CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC YEAR 2000 WIDTH 3600mm
    M-1487 CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC YEAR 2000 WIDTH 3600mm
    Compare
    REFERENCE NUMBER: M-1487 (660125KJH5RXM) CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC YEAR 2000 WIDTH 3600mm CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC MEZZERA BIANCO ROLLERS WIDTH: 3800 mm WORKING WIDTH: 3600 mm YEAR OF CONSTRUCTION: 2000 COMPOSED OF: - DOUBLE INTRODUCTION, FRAME MANUFACTURED IN PAINTED FE PROFILES , SLINGING BY ADJUSTABLE FLYWHEELS, 2 GROUPS OF WIDENING-CENTRING ROLLERS E+L KF20, FABRIC GUIDING ROLLERS IN AISI 316, DRAGGING CALANDER WITH 3 ROLLERS. - BY-PASS AND SYNCHRONIZATION BRIDGE COMPOSED OF : FRAME IN CARBON STEEL FE37, GROUP OF GUIDING ROLLERS IN STAINLESS STEEL COMPLETE WITH SELF-ALIGNED BEARINGS TO GUIDE THE FABRIC TO THE FOLLOWING SECTION . - ROLLER WASHING UNIT IN OPEN WIDTH , MOD. ACTIVA 30, WITH DOUBLE FABRIC DWELLING. - 5 INTERMEDIATE SQUEEZERS - SLAT WIDENING UNIT FOR DOUBLE ROW - SQUEEZING SYSTEM WITH : 2 ROLLERS COATED RUBBER/EBONITE, RUBBER HARDNESS 75-80 SHA, WORKING PRESSURE 3000 KG, A.C. MOTOR GEARBOX, INVERTER, PNEUMATIC DRIVE. - ROLLER WASHING UNIT IN OPEN WIDTH , MOD. ACTIVA 30, WITH DOUBLE FABRIC DWELLING. - 5 INTERMEDIATE SQUEEZERS - SLAT WIDENING UNIT FOR DOUBLE ROW - SQUEEZING SYSTEM WITH : 2 ROLLERS COATED RUBBER/EBONITE, RUBBER HARDNESS 75-80 SHA, WORKING PRESSURE 3000 KG, A.C. MOTOR GEARBOX, INVERTER, PNEUMATIC DRIVE. - ROLLER WASHING UNIT IN OPEN WIDTH, MOD. ACTIVA 20, WITH SIMPLE FABRIC DWELLING - INTERMEDIATE SEPARATOR FOR TANK SPLITTING - 5 INTERMEDIATE SQUEEZERS - SLAT WIDENING UNIT FOR DOUBLE ROW - DELIVERY GROUP WITH PNEUMATIC FOULARD OF 10 TON RUBBER/EBONITE, COMPLETE WITH BEARING FRAME AND PROTECTION CASING. RUBBER ROLLER WITH HIGH SQUEEZING EFFECT ROLLIN - SECOND DISCHARGING STACK - PUMP FOR THE BATH RECYCLING IN THE NEUTRALIZATION PART - PH-METER WITH DOSING PUMP TO NEUTRALIZE IN THE FIRST SECTION OF THE LAST TANK - BIG BATCHER, ADHERING TYPE, DRIVEN BY MOTOR WITH VARIABLE SPEED. - SLAT WIDENING UNIT FOR DOUBLE ROW - 2 DUCTING FOR THE WATER RECOVERY BETWEEN THE 2 WASHING UNITS IN OPEN WIDTH - 3 TEMPERATURE AUTOMATIC CONTROLS PER EACH WASHING UNIT - 4 SETS OF PROPORTIONAL VALVES WITH LITER COUNTER - COMPLETE MOTORIZATION OF THE LINE WITH MOTORS GROUP, ELECTRIC CONTROL CABINET AND SYNOPTICAL PANEL. - VERTICAL DRYER RAMALLUMIN COMPOSED OF 2 COLUMNS WITH 8 ROLLERS, IN ORDER TO DRY BOTH FACES OF THE FABRIC, FOR A TOTAL OF 16 DRYING ROLLERS. O MAX. WORKING WIDTH: 3600 mm. O MAX. MECHANICAL SPEED: 80 MT./MIN. O MAX. WEIGHT OF THE FABRIC, IN WIDTH 3400 mm 900 GR./LINEAR METER O FORESEEN WORKING SPEED WITH FABRIC W=3400mm W=850 GR. 40/45 MT./MIN. O FORESEEN WORKING SPEED WITH FABRIC W=3400 W=425 GR. 80 MT./MIN. O MODIFIED, AS FOLLOWS, WITH ADDITIONS OF : 2 COOLING ROLLERS, 1 SET OF ACCESSORIES FOR THE FEEDING AND RETURN OF THE COOLING WATER, SET OF COMPONENTS FOR THE CONTROL, 4 RETURN CYLINDERS, COMPENSATING GROUP ON THE INTRODUCTION SIDE, 3 SUCTIONING HOODS, 1 EXHAUSTER. Learn More
  9. TT-5007 COMPLETE EQUIPMENT AND LAMINATION FOR BACKING FABRICS FOR ABRASIVES, YEAR 1986 TO 2021
    TT-5007 COMPLETE EQUIPMENT AND LAMINATION FOR BACKING FABRICS FOR ABRASIVES, YEAR 1986 TO 2021
    Compare
    TT-5007 COMPLETE EQUIPMENT AND LAMINATION FOR BACKING FABRICS FOR ABRASIVES, YEAR 1986 TO 2021 MACHINES STILL UNDER PRODUCTION AND INSPECTION ANYTIME POSSIBLE. THE ENTIRE PLANT IS OPERATED BY 12 PEOPLE. ALL AVAILABLE SPARE PARTS, SPECIAL TOOLS AND OPERATING MATERIALS ARE SUPPLIED WITH THE PLANT. Learn More
  10. YY-3069 MAN HIGH SPEED MARINE ENGINE, MODEL 12VP185, ENGINE SPEED 1937
    YY-3069 MAN HIGH SPEED MARINE ENGINE, MODEL 12VP185, ENGINE SPEED 1937
    Compare
    YY-3069 MAN HIGH SPEED MARINE ENGINE, MODEL 12VP185, ENGINE SPEED 1937 MAN HIGH SPEED MARINE ENGINE MODEL: 12VP185 ENGINE POWER: 2720 KWB ENGINE SPEED: 1937 IDLING SPEED: 600 REV/MIN ROTATION: ANTI-CLOCKWISE LOOKING ON FLYWHEEL QUANTITY: 1 Learn More

Items 141-150 of 170

Page
per page
Set Ascending Direction
Shop By
Shopping Options
Category
  1. BRANDS 9 item
  2. COATING AND LAMINATING MACHINES 1 item
  3. DYEING AND FINISHING 11 item
  4. MEDICAL MASKS 3 item
  5. MEDICAL EQUIPMENT 5 item
  6. NONWOVEN MACHINES 10 item
  7. FOAM MAKING, PROCESSING, SHREDDING 9 item
  8. MATTRESS MANUFACTURING MACHINERY, QUILTERS, BEDSPREADS, AND RELATED MACHINES 4 item
  9. PILLOW PROCESSING MACHINES 1 item
  10. POWER GENERATION EQUIPMENT AND PLANTS 2 item
  11. SPINNING MACHINES SHORT FIBER 1 item
  12. FOOD MACHINERY 5 item
  13. PILLOW MANUFACTURING MACHINERY 1 item
  14. Wet Wipes 2 item
  15. PAPER MACHINE 1 item
  16. BOILERS 2 item
  17. STABILITY CHAMBER 1 item
  18. GENERATORS 6 item
  19. WASHING MACHINE 1 item
  20. Pet Line 1 item
  21. Filling Systems 1 item
  22. GAUZE SWAB PACKING MACHINES 1 item
  23. DRILLING MACHINES 1 item
  24. HIGH SPEED BOBBIN WINDING MACHINES 1 item
  25. PET PAD MAKING MACHINES 1 item
  26. CONSTANT TEMPERATURE AND HUMIDITY TEST CHAMBERS 5 item
  27. GAS TURBINES 7 item
  28. DRILLING RIG 2 item
  29. GAS TURBINE GENERATORS 4 item
  30. SLOT DIE COATING MACHINES 3 item
  31. AGGLOMERATORS 1 item
  32. DRILLING RIGS 2 item
  33. COMPLETE SPUNLACE LINES 1 item
  34. OIL RIGS 1 item
  35. POLYPROPYLENE TAPE LINE EXTRUDERS 1 item
  36. STEAM TURBINE PLANTS 1 item
  37. HIGH PRESSURE DOSING SYSTEMS 1 item
  38. WATERMAKERS 1 item
  39. AUTOMATIC GLUE SPRAY MACHINES 1 item
  40. GAS FIRED STEAM BOILERS 3 item
  41. SPINNING SYSTEMS 1 item
  42. REGRANULATION LINES 1 item
  43. DIESEL GENERATORS 2 item
  44. COATING RANGE 1 item
  45. STEAM TURBINES 4 item
  46. WIRE BENDING MACHINES 1 item
  47. GENERATOR SETS 4 item
  48. AUTOMATIC ADHESIVE SPREADING LINES 1 item
  49. NATURAL GAS GENSETS 2 item
  50. NAPKIN MACHINES 1 item
  51. FULLY AUTOMATIC BALING PRESS MODEL LIFT BOX 1500 ADW (DOUBLE ROTATING LIFT BOXES) WITH FULLY AUTOMATIC STRAPPING AND FILM WRAPPING 1 item
  52. AUTOMATIC MACHINES TO PRODUCE COMPRESSED FACE PAD, FACE TOWELS AND NAPKINS 1 item
  53. SOLAR TITAN 250S TURBINE-DRIVEN C51 CENTRIFUGAL COMPRESSORS SETS 1 item
  54. MAN MARINE ENGINES 1 item
  55. GENERAL ELECTRIC (GE) STEAM TURBINES 1 item
  56. STEAM BOILERS 3 item
  57. COMPLETE EQUIPMENT AND LAMINATION FOR BACKING FABRICS FOR ABRASIVES 1 item
  58. NATURAL GAS TURBINE GENERATOR SETS 1 item
  59. NATURAL GAS LIQUIDS EXTRACTION PLANT 1 item
  60. STEAM TURBINE POWER PLANT 1 item
  61. COMPLETE BOTTLING LINES 1 item
  62. COFFEE POD MAKING MACHINES 1 item
  63. PROCESSING AND PACKAGING LINES FOR COFFEE PODS 1 item
Compare Products
  1. Remove This Item
Compare
Clear All
You have no items to compare.
Copyright © 2013-present Magento, Inc. All rights reserved.