Search results for: 'cross'

G-1535 FOAM DRILLING MACHINE (FOAM PERFORATING MACHINE) MODEL: NOVA 26 TECHNICAL DATA: LOADING CONVEYOR: 2100 X 2100mm (82" X 82") UNLOADING CONVEYOR: 2100 X 2100mm (82" X 82") MAXIMUM DRILLING WIDTH: 2100mm (82") MAXIMUM DRILLING HEIGHT: 180mm (7") HOLE DIAMETER: 6 TO 30mm (1/4" TO 1.18") MAXIMUM CONTEMPORANEOUS HOLES NUMBER: 26 MINIMUM DISTANCE BETWEEN THE CHUCKS: 80mm POWER: 11 KW VOLTAGE: AS PER CUSTOMER WORKING PRESSURE BAR: 6 (90 PSI) NET WEIGHT: 2293 KGS (5000 LBS) FLOOR SPACE: 4375 X 3780 H 2204mm Learn More

REFERENCE NUMBER: M-5221 (1313565TNY12RX) L
NONWOVEN LINE WIDTH 2500mm

CARD FEEDING
CARDING

QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: M-5182 (1313TWSFXX12) L BEFAMA NONWOVEN MACHINERY (2) X NON-WOVEN LINES (1) X QUILT SEWING MACHINE QUANTITY AVAILABLE: 3 Learn More

REFERENCE NUMBER: M-5010 (12123GHBLSD11UN) L COMPLETE GLASS FIBER PROCESSING LINE FIBER PREPARATION & WEB FORMING EQUIPMENT CURING OVEN WITH ALL AUXILIARY EQUIPMENT, CROSS CUTTER, STACKER, AND WINDER RECUPERATIVE THERMAL OXIDIZER (RTO) TO TREAT OVEN EXHAUST DUST FILTRATION SYSTEM WITH RECYCLING OF FIBER AND RESIN PHENOLIC POWDER RESIN SUPPLY SYSTEM COMPLETE ELECTRIC CONTROL SYSTEM (SIEMENS S 7) FIBER BLEND CAPABILITIES: GLASS FIBER E GLASS UP TO STAPLE LENGTH OF 3 1/4 INCH 100% GLASS FIBER BLENDS WITH ANY MAN MADE FIBERS SUCH AS PET-PA OR RAYON GLASS FIBER BLENDS WITH ANY OF THE ABOVE PLUS ORGANIC FIBERS SUCH AS CELLULOSE, WOOD, NEWSPAPER, COTTON, AND ALL NATURAL FIBERS BI-CO FIBERS USED AS BINDER FIBER WITH A STAPLE LENGTH OF 2 INCHES AND A DTEX RANGE FROM 3 TO 10 MINIMUM BLEND RATIO IS 8% FOR EACH FIBER COMPONENT BLEND ACCURACY WITH THE USE OF OUR CONTROLS AND WEIGHING SYSTEM AS OFFERED +/- 2% WEB FORMING CAPABILITES: MINIMUM WEIGHT WITH 100% GLASS FIBER IS 35 TO 40 G/FT² MAXIMUM WEIGHT WITH 100% GLASS FIBER IS 300 G/FT² PRODUCT LOFT WITH 100% GLASS FIBER AT LOWEST WEIGHT AND FIBER LENGTH OF 3 INCH IS 45 TO 55 mm PRODUCT LOFT WITH 100% GLASS FIBER AT HIGHEST WEIGHT IS 250 mm PRODUCT WEIGHT ACCURACY IF OUR WEIGHT AND CONTROL SYSTEM IS IN USE WILL BE +/- 3% IN MACHINE & CROSS MACHINE DIRECTION FIBER DISTRIBUTION AND PRODUCT APPEARANCE AT LOWEST WEIGHT +/- 5% (WINDOWS AND CLOUDS) PHENOLIC RESIN CAPABILITIES: POWDER INTRODUCTION RATE INTO THE WEB FORMER IS MIN OF 10% AND A MAX OF 40% TRADITIONALLY THE AMOUNT OF BINDER RESIN IN USE IS BETWEEN 18 TO 22% IN RELATION TO THE FIBER WEIGHT POWDER DISTRIBUTION WITHIN THE PRODUCT AT AN ACCURACY OF +/- 3% PRODUCTION CAPACITIES PER HOUR WITH A MAXIMUM WORKING WIDTH OF 110 INCHES: WITH THE LOWEST PRODUCTION WEIGHT OF 35 TO 40 G/FT² 14 M/MIN AND 1,660 LB/HR WITH A PRODUCT WEIGHT OF 100 G/FT² 16 M/MIN OR 52 FT/MIN AND 4,000 LB/HR HIGHER PRODUCT WEIGHT (E.G.) 200 G/FT² 8 TO 9 M/MIN OR 26 TO 30 FT/MIN AT 4,000 LB/HR THESE PRODUCTION NUMBERS ARE CONSERVATIVE AND BASED ON ACTUAL TRIALS AND EXPERIENCE THE REAL PRODUCTION OUTPUT PER HOUR CAN BE INCREASED WHEN LOWER QUALITY EXPECTATIONS ARE ACCEPTED AND THE OPERATORS HAVE ACQUAINTED THEMSELVES WITH THE FEATURES OF THE EQUIPMENT QUANTITY: 1 Learn More

REFERENCE NUMBER: M-1758 (6602BHBBE5U) GEOTEXTILE CALENDER MACHINE -5700mm- YEAR 2004 MAKE: BOMBI MECCANICA ITALY 5.7 M WIDE GEOTEXTILE CALENDER MACHINE YEAR: 2004 IS IN PERFECT CONDITION FEW HOUR PRODUCTION IT IS CONNECTED AND CAN BE SHOWN TO CUSTOMERS VOLTAGE: 440V / 60 HZ / 3 PHASES UNWINDER ACCUMULATORS WITH ROLLS, 50M OF CONTENT 2 ROLLS CALENDER 5.7 WIDE 200,000 KCAL/HR GAS OIL HEATER UPPER HOOD FOR THE SMOKE COLLECT METAL DETECTOR INSTALLED ON TOP OF CALENDER ADJUSTING 2 ROLLS TEMPERATURE INDEP. ACCUMULATORS WITH ROLLS, 50 M LONG CROSS CUTTER W/6 LONG SLITTERS, AND EXIT BELT WINDER OPTION ROLL DISCHARGER 2.3 M WINDER, SPEED UP TO 30 M/MIN, READY TO BE SYNCHRONIZED 2.3 M WIDE, EDGE TRIMMERS WITH 2 DISC BLADES FELT WIDTH: 5.5 METER WEB THICKNESS AT ENTRY: AROUND 1 TO 2 mm WEB PREPARATION AT THE INLET: CROSS LAPPING AND NEEDLING PRODUCTION LINE SPEED: UP TO 25 M/MIN TYPE OF TREATMENT: HEAT SETTING, SMOOTHING OF THE SURFACES AND CALIBRATION, CUTTING AND ROLLING UP FELT WEIGHT: 90 TO 300 GSM FIBERS: POLY COTTON BLEND, POLYESTER, ACRYLIC, POLYPROP THERMOSETTING TEMEPRATURE: UP TO 225°C QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: J-1123 (1212KJNMXX11) NONWOVEN LINE EXIT WIDTH 2500mm MIXING/BLEND UNIT CONSIDER 1 3- COMPONENTS MIXING UNIT 1500 KG/H WITH FEET TABLE 1 MIXING CHAMBER/ MIXMASTER FÖRDERVENTLATOREN 1 CARDING WILLOW WORKING WIDTH 1700 MM CHUTE FEEDER VIBRITING UNIT BELT WEIGHTER 1 PCS. DOUBLE DOFFER CARD FOR TYP DF 680 WORKING WIDTH 2500 MM 6 ROLLER DRAWING-IN VOLANT EXIST (BUT NOT IN US, BECAUSE NOT FOR MAN-MADE FIBERS) RIM VENTILATION UPPER DOFFER WITH RANDOM DOWN DOFFER WITH TAKE-OFF ROLL ALL ELECTRIC DRIVES ARE FULL SYNCHRONIZES WITH THE MAIN DRIVERS OF THE NEEDLE PUNCH UNIT 1 PCS. TECHNOPLANTS CROSS-LAPPER TYP 2555. OC INPUT: 2`500 MM OUTPUT: 5700 MM SPEED: 80 M/MIN PROFILING UNIT 1 PCS. TECHNOPLANTS PRE-NEEDLEPUNCHE UNIT TYP PRN.50.DU.55 F WORKING WIDTH 5500 MM WITH FINGER- DRAWING-IN SYSTEM, TYP FG.5500 (CBF) 5000 NEEDLE/ METER UP 5000 NEEDLE / METER DOWN TOTAL 10'000 NEEDLE/ METER UP AND DOWN MAXI. STORKE FREQUENZ: 1200 U/MIN. STORKE HIGHT: 70 MM ENTRY SPEED. 1,2 UP TO 12 M/MIN. 1 PCS. FINISHING-NEEDLEPUNCH DILO OUG II 55 WORKING WIDTH: 5500 MM NEEDLE UP AND DOWN: 8000 + 8000 PRO LFM. TOTAL 16'000 NEEDLE 4 BOARDS MAXI STORKE FREQENZE.: 1200 U/MIN STORKE HIGHT: 60 MM ENTRY SPEED : 1,2 UP TO 12 M/MIN 1 PCS SPACER 1 PCS. LONGITUDINAL- UND CROSS CUTTING, MOD. LTC. CC-RB STAINLESS STEEL , DIAMETER 300 MM, UP TO 6 –KNIVES 1 PCS. WINDING, MODELL WM.55.M INCLUDING WEIGHING MACHINE QUANTITY AVAILABLE: 1 Learn More

JAMES HUNTER MACHINE CO Learn More

TT-8063 LATEX FINISHING COATING LINE, YEAR 1996 TO 2014 1. LATEX FINISHING COATING LINE 2. ETF PART 1996 3. BABCOCK PART 1998 4. KUSTERS PART 1998 QUANTITY: 1 Learn More

TT-8058 F.O.R./ASSELIN/FEHRER NEEDLING LINE, WORKING WIDTH 4400mm, YEAR 1968 TO 1980S 1. F.O.R./ASSELIN/FEHRER NEEDLING LINE 2. YEAR: 1968 TO 1980S 3. WORKING WIDTH: 4400mm Learn More

TT-7926 PEDERSEN 601M-16 HYDRAULIC PRESS, 1000 X 1600mm, 100 TON 1. HYDRAULIC PRESSES 2. BRAND: PEDERSEN 3. MODEL: 601M-16S 4. CONDITION: REBUILT 5. REFURBISHED QUANTITY: 1 Learn More