Search results for: 'COMPRE'

YY-2176 AUTOMATIC PILLOW VACUUM PACKING MACHINE (HYDRAULIC SYSTEM) WITH FRONT AND BACK FEED CONVEYOR POWER: 7.5KW SEALING WIDTH: 800mm TABLE AREA: 800 X 800mm COMPRESSION STROKE: 350mm THE COMPRESSION HEIGHT CAN BE ADJUSTED AIR PRESSURE: <0.8MPA CAPACITY: 300 TO 350 PCS/H MAXIMUM PRESSURE: 5 TONS (OIL HYDRAULIC SYSTEM) OVERALL DIMENSIONS: 4100 X 1250 X 2030mm QUANTITY: 1 Learn More

TT-1224 COLINES AIR BUBBLE LINE, WIDTH 1600mm, YEAR 2010 RAW MATERIAL: HDPE IN GRANULES, LDPE IN GRANULES, M.F.I. 1.7-2, DENSITY 0.919 WITH THE POSSIBILITY OF USING 30% LLDPE OR METALLOCENE LLDPE - 70% LDPE BLENDS FOR THE PRODUCTION OF BUBBLE FILMS AND THE THIRD LAYER MAX FILM WIDTH: 1500mm MAX CAPACITY OF THE EXTRUDERS: ABOUT 300 KG / HR MAX LINE MECHANICAL VELOCITY: 45 M / MIN MIN-MAX WEIGHT: 50-300 GR / M2 MAX REEL DIAMETER: 1000mm QUANTITY: 1 Learn More

TT-1045 ELECTROMECHANICAL UNIVERSAL TESTING MACHINE TENSILE TESTING EQUIPMENT KEY SPECIFICATIONS: MAX. CAPACITY: 10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN,10KN,20KN DISPLAY: LCA MODE FORCE RESOLUTION: 1/100,000 FORCE ACCURACY: ≤+/-0.5% STROKE RESOLUTION: 0.5mm TEST SPEED: 1-500mm/MIN, CAN SET WITH UP & DOWN FAST ADJUSTMENT BUTTON OF GRIPS FORCE UNIT SWITCH: KGF, N, IBF, G, TON, MPA MACHINE DRIVE: MOTOR DRIVE DIMENSIONS: 720 X 620 X 1400mm (W X D X H) WEIGHT: 150KG STANDARD ACCESSORIES: 1 SET OF GRIP QUANTITY: 1 Learn More

YY-1966 MELTBLOWN LINE, PRODUCTION SPEED MAXIMUM 100 METERS PER MINUTE 1750mm final trim width (68 inches) DETAILS: CONTAINERS TO SHIP APPROXIMATELY: 15 CONTAINERS 40” OT (THERE MAY BE NEEDED SOME HC OR OUT OF GAUGE CONTAINERS) IT HAS COOLING CALENDER IT HAS WINDER WITH SLITTERS IT PRODUCES 1 TO 5 MICRON (EVEN UNDER 1 MICRON) RANGE OF GSM: IT PRODUCES 15 TO 300 GSM STATUS: ASSEMBLED, IT CAN RUN PRODUCTION YEAR: THE LINE HAS BEEN PRODUCED IN SEPTEMBER 2020 AND IT HAS BEEN IN PRODUCTION ONLY FOR ONE YEAR. QUANTITY: 1 Learn More

J-4128 AUTOMATIC VACUUM PACKING MACHINE, 6 TO 8 PIECES PER MINUTE AUTOMATIC VACUUM PACKING MACHINE CAPACITY: 6 TO 8 PIECES PER MINUTE WORKING AREA: 800 x 800mm SEALING LENGTH: 800mm POWER: 1.5 KW QUANTITY: 1 Learn More

T-8540 WET WIPES MACHINE, CAPACITY 30 TO 120 PIECES PER PACK WET WIPES MACHINE CAPACITY: 30 TO 120 PIECES PER PACK DRIVE MODE: AUTOMATIC STABLE SPEED: 3500 TO 4800 PIECES PER MINUTE (25 TO 60 BAGS) MACHINE SIZE (L X W X H): 12200 × 2400 × 2200mm QUANTITY: 1 Learn More

J-2210 DRILLING MACHINE, 2100mm MAX DRILLING WIDTH, 6 TO 28mm HOLE DIAMETER DRILLING MACHINE VERTICAL DRILLING OF MATTRESSES AND PILLOWS BY MEANS OF SPECIAL INTERCHANGEABLE DRILLS WITH DIFFERENT DIAMETERS MATERIALS: EXPANDED PU FOAM, PE FOAM, VISCO, BONDED FOAM AND SIMILAR, LATEX EXCLUDED VERTICAL AND LATERAL MOVEMENTS OF THE THRUST YOKE ALLOW STRAIGHT AND CROSSED DRILLING, POSSIBLE TO OBTAIN 9 TYPES OF DRAWINGS FOR EACH MATTRESS COMPRESSED AIR JET TAKES FOAM SCRAPS OUT LEAVING HOLES FREE, WASTE EVACUATED WITH SMALL CONVEYOR AND SUCKED AND CONVEYED TO PROPER COLLECTOR STATION FOR RECYCLING CONTROLLED LUBRICATION DEVICE FOR DRILLS PNEUMATIC COMPRESSED DEVICE KEEPS MATTRESS FIRM DURING PERFORATION AND GUARANTEES BETTER PERFORMANCE EASY AND FAST REMOVING AND REPLACING OF DRILLS FEEDING AND UNLOADING CONVEYORS ARE CONTROLLED BY INVERTERS CONTROL CONSOLE COMPLETE WITH MULTIFUNCTION DEVICE (NEXUS) DRILLING SIMULATION AND PRODUCTION TIME AND COST COMPUTATION SOFTWARE INTERCONNECTION (INDUSTRY 4.0) QUANTITY: 1 Learn More

T-7966 SANFORIZER, NOMINAL WIDTH 2200mm MACHINE HAND: LEFT OR RIGHT HAND WIDTH: 2200mm SPEED (M/MIN): 5~80M/MIN PRESHRINKAGE: 16%, VARIED FROM VARIETY SHRINKING RATE: ≤1% STEAM PRESSURE OF PRESS ROLLER: 0.5MPA DIAMETER OF DRYING CYLINDER OF FELT FINISH: Φ2000mm FELT: ABOUT 2200G/M2 WATER CONSUMPTION (TON /HR): 1 STEAM CONSUMPTION (KG/HR): 500 TRANSMISSION AND CONTROL: PLC CONTROL, PARAMETERS ON LINE DISPLAY IN COLOR TOUCH SCREEN, MULTI-UNIT AC FREQUENCY CONVERSION DRIVE INSTALLED POWER (KW): 38.45 OVERALL DIMENSION (L X W X H): 12010(L) X 4168(W) X 3925(H)mm QUANTITY: 1 SET Learn More

T-7951PRE AND FINISH – NEEDLER, WIDTH 2800mm TO 2900mm ITEM 001 PRE - NEEDLER QUANTITY: 1 ITEM 002 FINISH - NEEDLER QUANTITY: 1 Learn More

AJ-2098 PILLOW FILLING MACHINE FOR DOWN, 2 NOZZLES -FOR DOWN BALL FIBER, SHORT POLYESTER FIBER & FEATHER MAIN CASE DIMENSIONS: 1600mm x 1200mm x 1950mm OVERALL DIMENSIONS: 2000mm x 2000mm MACHINE WEIGHT: 400 KGS QUANTITY: 1 Learn More