Search results for: 'table'

COFFEE, SYRUP, LABELERS, CARTONERS AND SIMILAR EQUIPMENT

FECKEN AND KIRFEL VERTICAL FOAM CUTTER FOR SALE

BAUMER CNC MACHINE, MODEL OFS-HE3

BAUMER CNC MACHINE, MODEL OFS-HE3

REFERENCE NUMBER: L-4034

LONG SHEET FOAM PEELING MACHINE- 2300 mm X 60 METERS LONG – NEW

CUTTING WIDTH: 2300mm

CUTTING HEIGHT: 1300mm (51 inches) (beginning bun height)

CUTTING SPEED: 0 TO 60 METERS PER MINUTE

CUTTING THICKNESS: 2 TO 60mm

REFERENCE NUMBER: R-7247
NOMINAL CAPACITY: 20 TO 50 TPD
QUANTITY: 1

REFERENCE NUMBER: F-1428

FEATHER FILLING MACHINE MODEL SR-2

PRODUCT FEATURES

•             FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•             AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•             FILLING TIME IS 2 TO 5 SECONDS

•             NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•             CE CERTIFICATE

•             ITEM NO.: SR-2

•             DIMENSION: APPROX. 11000 x 2500 x 3000MM

•             VOLTAGE: 200/380415V 50/60HZ 3PHASE

•             POWER: 13KW

•             FILLING RANGE: 2 TO 100 G, DEPENDING ON THE MATERIAL

•             ACCURACY: ±1G

•             AIR PRESSURE: 0.5-0.8MPA

•             THERE ARE 4 WEIGHING SYSTEMS AND ONE WORKING TABLE FOR DOWN FEATHER

•             IT IS MAINLY USED TO MAKE DOWN FEATHER QUILT

•             IT INCLUDES TWO AUTOMATIC FILLING TABLES, THE WORKING TABLE INCLUDES PNEUMATIC CLAMPING DEVICE FOR TWO FILLING PIPES, COMPOUND SHOE CLAMPING DEVICE, RING CLAMPING DEVICE AIR SUCTION, COMPRESSED AIR RING INJECTOR

•             THE FEATHER DOWN FILLING USES VACUUM METHOD STYLE FUNCTION THAT HELPS TO KEEP THE MATERIAL SOFT, ELASTIC AND HAND FEELING AND AVOIDS THE FEATHER BEING DAMAGED DURING THE FILLING PROCEDURE

•             WEIGHING ACCURACY CAN BE CONTROLLED WITHIN 1 GRAM WHICH CAN BE ADJUSTED BY SINGLE SET OR SINGLE PIECE ACCORDING TO DIFFERENT REQUIREMENT OF DIFFERENT PRODUCTS.

THIS HELPS QUALITY CONTROLLING AND AVOIDS MATERIAL WASTE ALSO

•             SIMPLE OPERATION THAT SAVES LABOR COST AND THE WHOLE SET CAN BE HANDLED BY ONE OPERATOR.

•             WORKING SURROUNDINGS ARE KEPT CLEAN BECAUSE ALL FILLING MATERIALS ARE KEPT INSIDE OF THE HOPPER

•             ADVANCED TECHNOLOGY LEVEL; THE WHOLE SET IS CONTROLLED BY PLC SYSTEM WITH AN ENGLISH OPERATION MENU WHEREIN 100 RECIPES CAN BE SET UP, EACH RECIPE CAN BE SET UP WITH ABOUT 80 SETS OF WEIGHT VALUE WHICH IS SUITABLE FOR VERY COMPLICATED PRODUCT DESIGN WITHIN ONE PIECE

•             HIGH WORKING CAPACITY; THE AVERAGE MATERIAL MEASURING TIME IS 4 TO 6 SECONDS. THE FILLING TIME CAN BE ADJUSTED AS DESIRED SO THAT TWO FILLERS CAN BE HANDLED BY ONLY ONE OPERATOR.

•             WITH OUR PROFESSIONAL R&D GROUP WE CAN DESIGN THE INDIVIDUAL FILLINGS ACCORDING TO YOUR REQUIREMENTS

EQUIPMENT INCLUDED:

•             MATERIAL HOPPER: DIA.1700 x 2500        1PCS

•             WEIGHING SYSTEM: 800 x 1000 x 1200MM           2PCS

•             PLC CONTROL SYSTEM & CONTROL PANEL:           1 SETS

•             MATERIAL CHANGING HOPPER: 1200 x 1200 x 2500MM  1PCS

•             AIR HOPPER: 1200 x 1200 x 2500MM        1PCS

•             MATERIAL FEEDER: 1200 x 1200 x 1200MM            1PCS

•             BLOWER:             4PCS

•             PIPE:      1SET

•             AUTOMATIC WORKING TABLE:  2SETS

•             ENGLISH EDITION ARTICLE AND VIDEO FOR OPERATION DESCRIPTION

REFERENCE NUMBER: F-1432

FEATHER FILLING MACHINE MODEL SR-6

PRODUCT FEATURES

•              FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•              AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•              FILLING TIME IS 2 TO 5 SECONDS

•              NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•              CE CERTIFICATE

•              ITEM NO.: SR-6

•              DIMENSION: APPROX. 6400×2500×3000MM

•              VOLTAGE: 200/380415V 50/60HZ 3PHASE

•              POWER: 11KW

•              FILLING RANGE: 2-2000 G, DEPENDING ON THE MATERIAL

•              ACCURACY: ±10G

•              AIR PRESSURE: 0.5-0.8MPA

•              THERE ARE 4 WEIGHING SYSTEMS AND ONE WORKING TABLE FOR THE DOWN FEATHER FILLING LINE

•              IT IS MAINLY USED TO MAKE DOWN FEATHER QUILT

•              IT INCLUDES TWO AUTOMATIC FILLING TABLES, THE WORKING TABLE INCLUDES PNEUMATIC CLAMPING DEVICE FOR TWO FILLING PIPES, COMPOUND SHOE CLAMPING DEVICE, RING CLAMPING DEVICE AIR SUCTION, COMPRESSED AIR RING INJECTOR

•              THE FEATHER DOWN FILLING USES VACUUM METHOD STYLE HELPS KEEP THE ORIGINAL MATERIAL SOFT, ELASTIC AND HAND TACT AND AVOIDS THE FEATHER BEING DAMAGED DURING THE FILLING PROCEDURE

•              THE ACCURACY CAN BE CONTROLLED WITHIN 10 GRAMS (WEIGHING RANGE:2000 GRAMS), WHICH CAN BE ADJUSTED BY SINGLE SET OR SINGLE PIECE ACCORDING TO THE REQUIREMENTS OF DIFFERENT PRODUCTS. IT HELPS QUALITY CONTROLLING AND AVOIDS MATERIAL WASTE

•              SIMPLE OPERATION THAT SAVES LABOR COST; THE WHOLE MACHINE CAN BE HANDLED BY ONLY ONE OPERATOR.

•              KEEPS CLEAN OF THE SURROUNDING ENVIRONMENT BECAUSE ALL THE FILLING MATERIALS ARE KEPT INSIDE OF THE HOPPER

•              THE WHOLE MACHINE IS CONTROLLED BY PLC SYSTEM WITH AN ENGLISH OPERATION MENU WHEREIN 100 RECIPES CAN BE SET UP IN ADVANCE TO THE CONTROL SYSTEM. EACH RECIPE CAN BE SET UP TO ABOUT 80 SETS OF WEIGHT VALUE WHICH IS SUITABLE FOR VERY COMPLICATED PRODUCT DESIGN WITHIN ONE PIECE

•              THE AVERAGE MATERIAL MEASURING TIME IS 4 TO 6 SECONDS. THE FILLING TIME CAN BE ADJUSTED AS DESIRED SO THAT TWO FILLERS CAN BE HANDLED BY ONE OPERATOR.

•              OUR PROFESSIONAL R&D GROUP CAN DESIGN THE INDIVIDUAL FILLINGS ACCORDING TO YOUR REQUIREMENTS

EQUIPMENT INCLUDED:

•              FEEDING SYSTEM: 2400 x 1500 x 3300MM          1PCS

•              WEIGHING SYSTEM: 800 x 1000 x 1200MM         2PCS

•              PLC CONTROL SYSTEM & CONTROL PANEL:           1 SETS

•              BLOWER:                                                                             4PCS

•              PIPE:                                                                                      1SET

•              AUTOMATIC WORKING TABLE:                                   2SETS

•              ENGLISH EDITION ARTICLE AND VIDEO FOR OPERATION DESCRIPTION

REFERENCE NUMBER: M-4086

EDGE SAW E-3 VERTICAL SLITTER

EDGE SAW VERTICAL SLITTER

MODEL: E-3

HEIGHT FROM TABLE TO TOP NECK (BLADE HEIGHT): APPROXIMATELY 53” INCHES

TABLE SIZE: (LENGTH: 137” INCHES) (WIDTH: 72” INCHES)

TABLE SIZE: (LENGTH: 137” INCHES) (WIDTH: 49” INCHES)

RAILS APPROXIMATELY 20 FEET LONG

THE MACHINE IS DISMANTLED

Distance from blade to neck is 72 inches

QUANTITY: 1

REFERENCE NUMBER: M-3984

RING SPINNING

(1) TRUTZSCHLER BLENDOMAT BDT 019, YEAR 1990

(1) TRUTZSCHLER BLENDER GBRA 1000, YEAR 1990

(1) TRUTZSCHLER AXIFLOW AFC, YEAR 1990

(1) TRUTZSCHLER MULTIMIXER MPM8/1400, YEAR 1990

(1) TRUTZSCHLER SEPAROMAT ASTA 800, YEAR 1990

(2) TRUTZSCHLER SILO BEB 1200, YEAR 1990

(2) TRUTZSCHLER FIBER OPENER RST, YEAR 1990

(5) TRUTZSCHLER CONDENSER LVSA, YEAR 1990

(4) TRUTZSCHLER FAN TV 425, YEAR 1990

(2) TRUTZSCHLER FAN TVF 425, YEAR 1990

(3) TRUTZSCHLER FAN TV 500, YEAR 1990

(1) TRUTZSCHLER FAN TVK 650, YEAR 1990

(3) TRUTZSCHLER FILTER SFV 123, YEAR 1990

(1) TRUTZSCHLER FILTER SFF 3, YEAR 1990

(3) TRUTZSCHLER CYCLON ANB AT, YEAR 1990

(1) TRUTZSCHLER FEED TABLE (OPENING) M30 S/C, YEAR 1990

(2) TRUTZSCHLER FEED TABLE (FILTER) S/N S/C, YEAR 1990

(1) TRUTZSCHLER FEED TABLE (CARDS), YEAR 1990

(14) TRUTZSCHLER CHUTE FEED FBK 533, YEAR 1990

(5) RIETER DRAW FRAME SB2, CAN SIZE 1000x1200mm, YEAR 1997

(2) RIETER DRAW FRAME RSB D30, CAN SIZE 500x1000mm, YEAR 1999

(3) RIETER DRAW FRAME RSB 951, CAN SIZE 600x1200mm, YEAR 1997

(2) ZINSER/HARA LAP FORMER 820, 20 POSITIONS, 1000x1040mm, YEAR 1990

(12) ZINSER/HARA COMBER 830, CAN SIZE 500x1200mm, YEAR 1990

(1) ELECTRONIC CLEANER PANEL, YEAR 1990

(5) ZINSER ROVING FRAME 660, 120 POSITIONS, 16x6, CAN SIZE 500x1000mm, YEAR 1990.

(3) SOHLER AIRTEX OVERHEAD BLOWER SP 88 ZB, YEAR 1990

(20) ZINSER RING FRAME 321E, 1000 SPINDLES, RING DIA 45mm, GAUGE 75mm, YEAR 1990

(10) SOHLER AIRTEX OVERHEAD BLOWER AP 88 ZZ WI, YEAR 1990

(1) SUCTION FAN, YEAR 1990

(4) MURATA WINDER 7 II (MACH CONER), 60 POSITIONS, WITH LUWA OVERHEAD BLOWER, YEAR 1990

(1) XORELLA STEAMER CONTEXXOR, YEAR 1990