Search results for: 'Roll e'

REFERENCE NUMBER: M-3287 (880AEHDHH7) K COATING LINE - 1600mm FOR SYNTHETIC LEATHER COATING LINE ROLLS TABLE: 1800mm WORKING TABLE: 1500 - 1600mm MAX MECHANICAL SPEED: OVER 30 M/MIN QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-8666

BRUCKNER GALAXY 500 BLEACHING RANGE FOR ROPE KNITTED FABRICS-YEAR 1989

 

MAKE: BRUCKNER

MODEL: GALAXY 500

YEAR 1989

10 CHAMBERS HEATED BY STEAM

WIDTH 1000mm TO 1100mm

ROLLER’S WIDTH 1300mm

2 DOSING STATIONS

WORKING TEMP. 98 – 180 OC

MAX.  WORKING PRESSURE 6.0 BARS +/- 0,7

AVERAGE WORKING SPEED 20M/MIN

AVERAGE PRODUCTION EFFICIENCY 500 KG/H

 

MACHINE OVERHAULED IN 2010

 

QUANTITY: 1 

Learn More

REFERENCE NUMBER: M-5299 (131324QND12UF) L AUTOMATIC WOVEN BAG CONVERSION LINE CUTTING-SEWING TYPE AUTOMATIC WOVEN BAG CONVERSION LINE CUTTING-SEWING TYPE MODEL: CS-2HS EQUIPPED WITH TWO SERVO MOTORS & 90° TRANSFER CLIPPER DIMENSIONS (LxWxH): 4850mm x 3880mm x 1180mm WEIGHT: 2800KG QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5285 (1313JCMNXX12RC) L TEPA JTE-1500 ELECTRONIC ATMOSPHERIC JIGGER YEAR 2001 TEPA ELECTRONIC JIGGER MODEL JTE-1500 TYPE 13000 (ATMOSPHERIC) YEAR 2001 FACE ROLLER WIDTH: 2400mm WORKING WIDTH: 3200mm MAXIMUM WINDING DIAMETER: 1500mm MINIMUM WINDING DIAMETER: 500mm ELECTRONIC DRIVE WITH LENZE INVERTERS SETEX 838 DYE CYCLE CONTROLLER AUTOMATIC DEVICE FOR CENTERING THE FABRIC DURING THE LOAD VAT MAXIMUM CAPACITY 2530 L RUNNING SPEED 20 TO 180 M/MIN FABRIC CAPCITY = 1570/FABRIC THICKNESS IN mm 2 ADDITIONAL VATS EACH 500 L CAPACITY, WITH MIXERS AND ADDITIONAL PUMP WITH BOX FILTER 2 DRAIN VALVES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-0324 PROFILING MACHINE F2200 FOR FOAM MATTRESSES, MATTRESSES, MAXIMUM WIDTH 2200mm WORKING CUTTING WIDTH 2200mm WORKING CUTTING HEIGHT 20/200mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-0323 PROFILING MACHINE F2000 FOR FOAM MATTRESSES,MATTRESSES,MAXIMUM WIDTH 2200mm WORKING CUTTING WIDTH: 2000mm WORKING CUTTING HEIGHT: 20 / 180mm QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: K-5243 (YOU MUST LOOK AT THE VIDEO, IT’S AMAZING) AUTOMATIC TRIMMING MACHINE FOR FOAM BLOCKS OR FOAM MATTRESSES, FOUR SIDES DESCRIPTION: PU SLABS CUT FROM FOAM BLOCK BY HORIZONTAL CUTTING UNDERGO PERIMETRICAL STRETCHING, (SOMETIMES A FEW CENTIMETERS STRETCHING). IN ORDER TO ACHIEVE SATISFACTORY SIZES (±1MM EACH SIDE) THE REMOVING OF IRREGULAR EDGES IS REQUIRED. THIS MACHINE TRIMS FOAM SLABS AND ALSO COUPLED SLABS. IT CAN BE PLACED AT THE END OF THE MATTRESS GLUING PLANT (MANUAL OR AUTOMATIC) OR BEYOND THE HORIZONTAL CUTTING MACHINE. THE COUPLED FOAM SHEETS ARE NOT ALIGNED AND NEED TO BE TRIMMED. OFTEN THE COUPLED MATTRESSES ARE TRIMMED ONE BY ONE ALONG THE FOUR SIDES WITH A MANUAL VERTICAL CUTTING MACHINE WASTING A LARGE AMOUNT OF TIME. THIS MACHINE AUTOMATICALLY TRIMS THE FOUR SIDES OF FOAM MATTRESSES WITHOUT ANY HANDLING; THAT MEANS AN ACCURATE TRIM AND SHORT PROCESSING TIME. QUANTITY AVAILABLE: 1 Learn More

G-1535 FOAM DRILLING MACHINE (FOAM PERFORATING MACHINE) MODEL: NOVA 26 TECHNICAL DATA: LOADING CONVEYOR: 2100 X 2100mm (82" X 82") UNLOADING CONVEYOR: 2100 X 2100mm (82" X 82") MAXIMUM DRILLING WIDTH: 2100mm (82") MAXIMUM DRILLING HEIGHT: 180mm (7") HOLE DIAMETER: 6 TO 30mm (1/4" TO 1.18") MAXIMUM CONTEMPORANEOUS HOLES NUMBER: 26 MINIMUM DISTANCE BETWEEN THE CHUCKS: 80mm POWER: 11 KW VOLTAGE: AS PER CUSTOMER WORKING PRESSURE BAR: 6 (90 PSI) NET WEIGHT: 2293 KGS (5000 LBS) FLOOR SPACE: 4375 X 3780 H 2204mm Learn More

REFERENCE NUMBER: K-9100 HORIZONTAL FOAM CUTTING MACHINE:(FULLY AUTOMATIC) - FOR 60" HIGH BUNS MODEL PQ-2150- 1524MM FOAM BLOCK SIZE W2150 X L3000mm X 1524mm HIGH POWER 7.94 KW CUTTING SPEED 0~25m/MIN (TABLE TRAVEL SPEED) FLOOR SPACE REQUIREMENT L5800 X W3500 X H2400mm CUT THICKNESS FROM 2 mm AND UP BLADE LENGTH 9580mm, BLADE WIDTH 30mm BLADE THICKNESS IS 0.45mm, BLADE GUIDE OPENING IS FIXED OPENING OF 0.55mm BLADE SPEED: 720 METERS/MINUTE MACHINE WEIGHT 2000 KG VERTICAL BLADE MOVEMENT IS BY BALL SCREWS FULLY AUTOMATED PLC NUMERICAL CONTROLS ALLOWING FOR MULTIPLE THICKNESS CUT IN ONE BUN, SEQUENTIALLY TOUCH SCREEN CONTROLS, INVERTER CONTROLS, SIEMENS PLC , all motors 220 volt , 3 phase , 60HZ WITH A PRESSURE ROLLER FOR FINER CUTS.ELECTRICALLY ACTIVATED VACUUM TABLE (3.6 Kw MOTOR) BLADE SHARPENER AND DUST COLLECTOR (1.1 Kw motor) MOVABLE STABILIZER BAR FOR BLADE GUIDE EXTRA SUPPORT PNEUMATIC BLADE GUIDE TENSIONING QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-4612 HORIZONTAL FOAM CUTTING MACHINE:(FULLY AUTOMATIC) MODEL PQ-2150 FOAM BLOCK SIZE W2150 X L3000mm X 1200mm HIGH POWER 7.94 KW CUTTING SPEED 0~25m/MIN (TABLE TRAVEL SPEED) QUANTITY AVAILABLE: 1 Learn More