Search results for: 'Power''

ENVIRONMENT: 380V/50Hz
RAW MATERIAL: MFI=1000 TO 1600
PRODUCT SPECIFICATION: WIDTH: 1600mm (AS PER 50G/M2)
WEIGHT RANGE: 10 TO 80G/M2
PRODUCT CAPACITY: 80KG/H (AS PER WEIGHT RANGE ≥80G/M2, WIDTH: 1600mm)
MAX MECHANICAL SPEED: 0 TO 50M/MIN
FIBER FINENESS: 2 TO 5μM
TOTAL INSTALLED POWER: 400 KW
OUTPUT FOR 25G/M2: ABOUT 1 TON
DIMENSION: 16MX8MX6M
QUANTITY: 1

How does it work?
What's the system function?
Can it be used as an attendance control unit?

CAPACITY: 100 TO 150 MASKS PER MINUTE
PRODUCES MASKS WITH 3 LAYERS OF POLYPROPYLENE NONWOVEN MATERIAL
AIR PRESSURE: 0.6 MPa, AIR CONSUMPTION 300 LITERS PER MINUTE
CONTROLLED BY PLC, OPERATED BY LCD TOUCH SCREEN
USES ULTRASONIC WELDING FOR EAR STRAPS
VOLTAGE: AS PER CUSTOMER
TOTAL POWER: 11 KW
DIMENSIONS: 6850 x 3520 x 1990mm
WEIGHT: ≤ 5000kg

MASK SURFACE LAYER, FILTER LAYER AND BOTTOM LAYER CAN BE ALIGNED AND FED TO THE MACHINE AUTOMATICALLY
BOTH SIDES ARE SYMMETRICAL WITH ULTRASONIC PROCESS STATIONS FOR EAR STRAP WELDING
AFTER WELDING, THE MASKS ARE COUNTED AND PILED TOGETHER AUTOMATICALLY
MASKS ARE DISTRIBUTED EVENLY TO TWO SETS OF EAR STRAP STATIONS BY AUTOMATIC TRANSMISSION SYSTEM, CONTROLLED BY PLC
NOSE CLIPS CAN BE AUTOMATICALLY FED, CUT AND ULTRASONICALLY WELDED

THE CUP TYPE MASK PRODUCTION LINE CAN BE SENT BY AIR, THERE ARE TOTAL 5 WOODEN CASES, SIZES AND WEIGHT AS BELOW:

1. 2500 X 1100 X 1000mm, 1PC, 250KGS
2. 2200 X 1000 X 1500mm, 1PC, 1100KGS
3. 3000 X 1200 X 1500mm, 1PC, 1100KGS
4. 3000 X 1200 X 1500mm, 1PC, 1100KGS
5. 1900 X 700 X 1150mm, 1PC, 250KGS

IF CUSTOMER NEEDS MASK BAGGING MACHINE TO CONNECT WITH DISPOSABLE MASK PRODUCTION LINE, THERE WILL BE ANOTHER TWO WOODEN CASES EXTRA, BUT WILL CANCEL THE FIFTH WOODEN CASE, SIZES AND WEIGHT AS BELOW:

1. 1580mm X 840MM X 1510 mm，1PCS, 340KG
2. 2540 mm X 540 mm X 1510 mm，1PCS, 80KG

ONE-PIECE MASK MACHINERY, MADE ON HOSIERY MACHINES
REBUILT, RECONVERTED & UPDATED INTO MACHINES FOR ONE-PIECE MASKS

SINGLE CYLINDER MACHINES
WITH FULLY ELECTRONIC CONTROL
DIAMETER: 4”
NEEDLES: 200 TO 400
FEEDS: 4

KNITTING PRODUCTION:
• MASKS READY TO WEAR IN ANY SIZE & STYLE
• THEY ARE PRODUCED USING ANY NATURAL YARN,
ECOLOGICAL YARN, ANTIBACTERIAL FIBER, STRETCH FIBERS
• CAN BE CUSTOMIZED WITH DESIGNS, COLORS, LOGOS
• PRODUCTION TIME: FROM 45 SECONDS PER MASK

PLAIN FABRIC, RUN PROOF, MICROMESH, NET, REINFORCED BAND, REINFORCED & FLOATED PATTERNS
SINKER CAP WITH STEPPING MOTOR
MASKS ARE COMPLETE WITH A TUBULAR POCKET FOR INSERTING FILTER OR ADDITIONAL FABRIC FOR BETTER PREVENTION
-TUBULAR POCKET DIMENSIONS: 50 X 100mm (FILTERS MAY ALSO BE ROUND SHAPE)
MACHINE WASHABLE AND REUSABLE
MOTORIZED DIAL ARM WITH VERTICAL MOVEMENT THROUGH STEPPING MOTOR FOR
UNLIMITED HEIGHT POSITIONS

STITCH CAMS WITH INDEPENDENT VARIABLE PROFILE SYSTEM
SYSTEM ON YARN FINGERS FOR PLATING CONTROL
ELECTRONIC NEEDLES & NEEDLES SELECTION ON 4 FEEDS
PROGRAMMABLE & VARIABLE STITCH CAM LOWERING IN DIFFERENT AREAS
BY STEPPING MOTOR ON EACH FEED
ALL FUNCTIONS ELECTRONICALLY CONTROLLED
PROGRAMMING STYLES & SIZE, PATTERNS EDITING & STITCH CAM LOWERING BY PERSONAL COMPUTER
AND POWERFUL GRAPHIC SOFTWARE FOR WINDOWS ENVIRONMENT.
KEYBOARD WITH GRAPHIC DISPLAY FOR SELECTION OF STYLE, SIZE , PATTERNS & OTHER FUNCTION
PRE-SETTING AND PROGRAMMING FOR DIFFERENT KINDS OF YARNS FEEDING DEVICE

DIMENSIONS: 1000mm L x 1000mm W x 2500mm H
SHIPPING WEIGHT: 350 KG, ON PALLETS
SHIPPING DIMENSIONS: 1000mm L x 1000mm W x 2000mm H
DELIVERY TIME FOR 1 TO 10 MACHINES: 3 TO 4 WEEKS FROM PAYMENT (3/27)

CAPACITY 90-110 MASKS PER MINUTE
MASK DIMENSIONS: 17.5 x 9.5mm
MATERIAL POLYPROPYLENE FABRIC
3 LAYERS
SEALING TYPE ULTRASONIC
TOTAL POWER: 10KW
POWER SUPPLY: AC 220 VOLTS, 50 OR 60 Hz (AS PER CUSTOMER)
DIMENSIONS: 7100mm x 3000mm x 1980mm

QUANTITY: 1

CAPACITY: 30-35 MASKS PER MINUTE
HIGH STABILITY, LOW FAILURE RATE
COMPUTER CONTROLLED OPERATIONS DRIVEN BY PLC
WITH AUTOMATIC TENSION CONTROL
VOLTAGE: 380 VOLTS, +5%, 50 Hz (OR AS PER CUSTOMER)
TOTAL POWER: ABOUT 15 KW
DIMENSIONS: L 10500 x W 1500 x H 2200mm

QUANTITY: 1

CAPACITY: 100 TO 120 PER MINUTE
AUTOMATIC CONVEYING
CUT OFF THE BRIDGE OF THE NOSE
MASK EDGE WELDING
FOLDING
ULTRASONIC FUSION
WITH AUTOMATED MOLDING AND CUTTING
IT CAN BE USED AS A MASK WITH 1-4 LAYERS OF CLOTH ( THE ACTIVATED CARBON MATERIAL CAN BE
ADDED IN THE MIDDLE )
RATED POWER 10KW ( INCLUDING WELDING MACHINE)
DIMENSIONS: SIZE (L) 6500 x 3500 (W) x 1950 (H) mm

QUANTITY: 1

CAPACITY 80 TO 100 MASKS PER MINUTE
MASK DIMENSIONS: 17.5 x 9.5mm
MATERIAL: POLYPROPYLENE FABRIC
3 LAYERS
SEALING TYPE ULTRASONIC
TOTAL POWER: 3 KW
POWER SUPPLY: 220 VOLTS, 509 OR 60 Hz (AS PER CUSTOMER)
DIMENSIONS: 3300 x 630 x 1850mm

QUANTITY: 1

I. FUNCTION
THE MACHINE IS FULLY AUTOMATIC EAR TO LOOP MASK MAKING MACHINE. THIS MACHINE INCLUDES ONE SET OF CS-175 AND 2 SETS CS-WD175 AND BY A UNIT OF AUTOMATED DISPENSER. MASK BODIES PRODUCED ON THE MASK MACHINE CAN BE ALLOCATED ONTO 2 SETS OF SUBSEQUENT MACHINES CONTROLLED BY PLC AT THE SPEED OF 0 TO 120 PIECES PER MINUTE. ALL OF OPERATIONS OF THE MACHINE ARE CONTROLLED THROUGH TOUCH SCREEN OR PLCS.
II. PROCESS
AFTER THE MACHINE MAKES THE MASK BODY, THE CONVEYOR BELT STRUCTURE TRANSPORTS THE MASK BODY PIECE TO THE CONNECTING CONVEYOR. THROUGH THE CONNECTION CONVEYOR MASK PLATE TO THE CONVEYOR BELT, AGAIN THROUGH THE CONVEYOR BELT THE MASK IS TRANSPORTED TO THE EAR PIECE SECTION TO THE FRONT OF THE MACHINE ABOVE THE FIRST MASK PLATE, FINALLY THROUGH THE CYLINDER DOWN THE MASK ONTO MASK EAR MACHINE DISC, FOLLOWED UP BY EAR MASKS FOR THE EARS OF THE BELT WELDING MACHINE AND THEN IT’S COMPLETE.
III. FEATURES:
1. MACHINE FRAME IS MADE OF ALUMINUM ALLOY, PREVENTED FROM RUST;
2. THE MACHINE CAN MAKE 1 TO 3 TYPES OF MASK BLANKS ACCORDING TO WHAT THE CUSTOMER REQUIRES.
3. THE SIZE OF THE MASK BLANK AND THE FOLDING LOCATION CAN BE ADJUSTED;
4. THE DIRECTION OF THE EAR LOOP IS OUTSIDE;
5. A COMPUTER PROGRAM CONTROL AND PHOTOELECTRIC DETECTION ACHIEVES A HIGH RELIABILITY AND LOW FAILURE RATE.

I. FUNCTION
THIS MACHINE IS USED TO PACK DISPOSABLE SURGICAL FACE MASK WITH THE SIZE OF 190 X 65mm. IT CAN ALSO BE USED TO PACK OTHER PRODUCTS SUCH AS WET TISSUE.
II. FEATURES:
1. ONE SET OF INK TO INJECT PRINTER IS INCLUDED; IT CAN BE USED TO PRINT THE DATA AND OTHER INFORMATION.
2. THE AIR COMPRESSOR EQUIPMENT IS OPTIONAL.
3. PACKING MATERIAL: SINGLE TO SIDE HEAT TO SEALING PACKAGING FILM MATERIALS, SUCH AS OPP, CPP, OPP COMPOSITE PE, PET COMPOSITE PE, SINGLE TO LAYER OR COMPOSITE PACKAGING FILM MATERIALS.
4. BAG FORM: BACK TO SEALED PACKING, CAN BE CUSTOMIZED.
5. VERTICAL/HORIZONTAL SEAL: RETICULATED PACKAGING/VERTICAL AND RETICULATED PACKAGING.

III. SPECIFICATION:
NAME: PILLOW PACKING MACHINE
TYPE KD TO 350
APPLICATION: FOR ALL KINDS OF OPP HEAT TO SEALING FILM, COMPOSITE FILM, SPRAY FILM PAPER, ALUMINUM FOIL FILM, ALUMINUM PLASTIC COMPOSITE FILM
MACHINE SIZE: 4600 X 850 X 1500
PACKING SPEED: 60 TO 220 BAG/MIN
MAX. PACKING SIZE: 330mm, 150mm, 80mm. LENGTH: 330mm, WIDTH: 150mm, HEIGHT: 80mm
MIN. PACKING SIZE: 50mm, 10mm, 5mm. LENGTH: 50mm, WIDTH: 10mm, HEIGHT: 5mm
ELECTRICAL: AC220V, 2.7KW
AIR PRESSURE 0.5 TO 0.7 MPA
AIR CONSUMPTION: >0.36 (M3/H)
(DB) NOISE: 60 TO 70DB
MACHINE WEIGHT: 550KG
MOTOR FREQUENCY ADJUST: 0 TO 50HZ
AUTOMATIC CONTROL
AUTOMATIC PRINTING
STANDARD: GMP STANDARD, PACKAGING MACHINE ENTERPRISE STANDARD
APPROVAL: ISO9001：2000, CE ISO:2000