Search results for: 'Cone+w'

TT-1257 SAHM WINDERS, YEAR 2002 INCLUDING ELECTRICAL PANEL CAN FIT IN 1 X 40 FOOT + 1 X 20 FOOT CONTAINER QUANTITY: 162 Learn More

REFERENCE NUMBER: P-3663 
97126 FB DIRECT WARPING MACHINE & ZELL BZ-7M & XK Z6F SIZING MACHINE
YEAR 1978, 1975 & 1986
WIDTH 2400mm 
QUANTITY: 3 

 

Learn More

REFERENCE NUMBER: L-4933

FADIS TU WINDING MACHINE. 56 POSITIONS, YEAR 2001

 

QUANTITY: 1

Learn More

ITEM 002
STEAMER OMV
MODEL VAP60
YEAR
1999
QUANTITY: 1

Learn More

A-1910 COMPLETE PLANT FOR DYEING BOBBINS, HIGH TEMPERATURE, LORIS BELLINI

(1) AUTOMATIC PREPARATION FOR CONES LORIS BELLINI, 2003 - PREPARATION OF CONES AND AUTOMATIC LOADING OF THE CONES ON THE EQUIPMENT LOOPS
(1) MINOX APPARATUS MODEL RPP/0-25, YEAR 1999 - LOAD 20KG - COMPLETE WITH TANK AND SAMPLER WITH 1 CONE
(2) HORIZONTAL APPARATUS LORIS BELLINI, YEAR 1988 - OPERATING AT PRESSURE OF 5 BAR AND AT TEMPERATURE 140°C - LOAD CAPACITY 500 BOBBINS APPROX KG.1000 EACH - PREPARATION TANK FOR WATER HEATING – POSSIBILITY TO WORK INDIVIDUALLY AND IN PARALLEL
(2) HORIZONTAL APPARATUS LORIS BELLINI, YEAR 1987 - OPERATING AT PRESSURE OF 5 BAR AND AT TEMPERATURE 140°C - LOAD CAPACITY 500 BOBBINS APPROX KG.1000 EACH - PREPARATION TANK FOR WATER HEATING - POSSIBILITY TO WORK INDIVIDUALLY AND IN PARALLEL
(1) DRYER CONDENSATION LORIS BELLINI
THE PLANT IS NOT SOLD SEPARATELY.

QUANTITY: 1

Learn More

M-6262 RF SYSTEMS TD-85 RADIO FREQUENCY DRYER FOR CONES YEAR 2002

RADIO FREQUENCY DRYER FOR CONES
MAKE: RF SYSTEMS
MODEL: TD-85 (K85)
YEAR: 2002
THREE PHASES 380 – 50 HZ
FOR DIFFERENT VOLTAGE THE MACHINE IS EQUIPPED WITH AUTO TRANSFORMER
THE NOMINAL VOLTAGE SHOULD BE WITHIN 5% (TEMPORARY EXCURSIONS OF +5% AND -5% ARE PERMITTED) OTHERWISE CUSTOMER MUST INSTALL A SUITABLE STABILIZER
MAXIMUM POWER ABSORBED FROM THE MAINS: 130 KVA
MAXIMUM CURRENT ABSORBED: 210 A
GAUGE WIRE: 3x75mm2 + GROUND 50mm2 MINIMUM

GENERATOR
MAXIMUM POWER RADIO FREQUENCY GENERATOR: 85 KW (1 x 85KW)
WORK FREQUENCY: 27 MHZ
COOLING SYSTEM: FORCED AIR
MAXIMUM ROOM TEMPERATURE: TA = 35°C IF HIGHER POWER MUST BE REDUCED
MAXIMUM EXHAUST AIR TEMPERATURE: TU = 85°C
OSCILLATOR: CAVITY TYPE WITH HIGH OVERALL EFFICIENCY
FREQUENCY STABILITY: WITHIN LIMITS
RADIATED FIELD: WITHIN LIMITS
GRID CURRENT WITH NO LOAD: 2.3 A TO 2.5 A
GRID CURRENT MINIMUM WITH FULL LOAD: 1.4 A
TRIODE TYPE: RS 3060 CL
FILAMENT TRIODE VOLTAGE: 10 V + 1% - 3%

BELT – CONVEYOR
MATERIAL: POLYESTER FABRIC
TRACKING: AUTOMATIC
LENGTH: 21600mm
WIDTH: 1750mm
RANGE OF CONVEYOR SPEED: 0 TO 50 M/ORA
ELECTRODE: STANDARD TYPE

PRODUCTIVITY
MAXIMUM EVAPORATING CAPACITY: 90 KG WATER PER HOUR

DIMENSIONS
LENGTH: 9600mm
WIDTH: 2124mm
MAXIMUM HEIGHT: 3400mm
GALLERY LENGTH: 4000mm
INLET LENGTH: 2800mm
OUTLET LENGTH: 2800mm
BELT WIDTH: 1750mm
LOAD HEIGHT: 900mm
MAXIMUM HEIGHT OF INLET TRAP: 300mm

THE DRYER TD85 IS COMPOSED OF ONE UNITY OF 85 KW

SPECIAL REQUIREMENTS ON USING RADIO FREQUENCY DRYER
THE DRYER CAN ACCEPT ONLY HYDROEXTRACT GOODS WITH EVEN MOISTURE CONTENT
POSSIBLE FIRE HAZARD WHEN DEALING WITH UNEXTRACTED PACKAGES
PROPEN HYDROEXTRACTION IS IMPORTANT PRIOR TO RF DRYER
LOAD PRODUCT WITH SAME DIMENSIONS AND SIMILAR MOISTURE CONTENTS
PACKAGE PLACEMENT ON THE BELT. ANY TYPE OF TUBE MAY BE USED IN A CONTINUED RF DRYER
METAL TUBES REQUIRE MOVE CARE IN PLACEMENT ON THE BELT THEN PLASTIC TUBE
METAL TUBES CAN CAUSE SHORT CIRCUITY, OR ARCING, FROM ONE ELECTRODE TO GROUND, WHICH CAN DAMAGE THE BELT OR CAUSE FIRE
PACKAGE WITH METAL TUBES MUST BE PLACED ON THE BELT SO THE METAL IS PARALLEL TO THE ELECTRODES AS SHONS IS TY
THE CONVEYOR SHOULD ALWAYS BE LOADED EVENLY, WITH NO BIG EMPTY GAPS
LOAD AS MUCH AS YOU CAN
GOOD WITH DIFFERENTS SIZE ARE NOT ALLOWED THEY CAN GET BURNS
LOAD A QUANTITY OF GOODS WITH A QUANTITY OF WATER TO REMOVE PER LINEAR METER OF BELT AROUND 5 TO 15 KG PER LINEAR METER OF BELT
THE MACHINE CANNOT ACCEPT METALLIC DYSTUFF (EX.CHROME)
DO NOT ENTER METALLIC PARTS
METALLIC IN THE GALLERY CAUSES ELECTRICAL DISCHARGES WHICH MAY THOROUGHLY RUIN BELT AND SET THE DRYING MATERIAL ON FIRE

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4009

FORMALDEHYDE PLANT & SYSTEMS -90,000 TON PER YEAR

 

90,000 TON/YEAR
(200 MILLION LBS/YR @ 37% CONCENTRATION)

SHUT DOWN: SPRING 2010

PLANT PRODUCES A 37% AND A 50% FORMALDEHYDE SOLUTION BY PARTIAL OXIDATION AND DEHYDROGENATION OF METHANOL.

RAW MATERIALS:

METHANOL

SILVER CATALYST

ORIGINAL PLANT EQUIPPED WITH:

MONSANTO PROCESS

(2) CONVERTERS AND ASSOCIATED EQUIPMENT, ABSORBER AND DISTILLATION COLUMN

MODIFICATIONS:

ADDED 3RD CONVERTER FOR CAPACITY IMPROVEMENTS

METHANOL VENTS SCRUBBER ADDED

WASTE HEAT BOILER ADDED

INSTALLED A DCS ON THE REACTOR SECTION (2006)

PRODUCT SPECIFICATIONS:

CLEAR AQUEOUS SOLUTIONS OF:

50U: 50.0 - 50.45% FA, <1.05% MEOH, <0.055% FORMIC ACID

37U: 37.0 - 37.3% FA, <1.05% MEOH, <0.035% FORMIC ACID

37M: 37.0 - 37.5% FA, 9 - 13% MEOH

OTHER CONCENTRATIONS AS REQUIRED UP TO 50% BOTH INHIBITED AND UNINHIBITED

CONTACT IPP FOR A COMPLETE PROCESS DESCRIPTION AND FLOW DIAGRAM

COMPLETE DOCUMENTATION AVAILABLE

 

FORMALDEHYDE PROCESS UNITS FOR SALE
(MAJOR UNITS ONLY. CONTACT IPP FOR A COMPLETE LIST)

 

2.9 - 20 MM BTU/HR JOHN ZINK THERMAL OXIDIZER SYSTEM

DESIGNED TO INCINERATE TWO SOLVENT LADEN GAS STREAMS USING A SMALL AMOUNT OF NATURAL GAS.

ONE SMALL SOLVENT GAS STREAM WITH A FLOW OF 120 - 320 SCFM, THE OTHER LARGER OFF GAS STREAM OF 8,200 - 17,500 LBS/HR.

GAS BURNER IS RATED FOR 2.9 - 20 MM BTU/HR (INSTALLED NEW IN 2006)

THE WASTE HEAT BOILER PORTION GENERATES STEAM AT 25,000 LBS/HR WITH A PRESSURE OF 75 PSIG (NORMAL) UP TO 125 PSIG (DESIGN).

THE UNIT USES STAGED BURNER TECHNOLOGY TO REDUCE OR ELIMINATE NOX.

CONTACT IPP FOR A MAJOR LIST OF COMPONENTS

 

DISTILLATION COLUMN SYSTEM 

13,000 LBS/HR LIGHT ALDEHYDES AND LIGHT ALCOHOL DISTILLATION

COMPLETE SYSTEM INCLUDES:

72" DIA. X 75' 316LSS BUEHLER-MORRIS DISTILLATION TRAY COLUMN

(2) SS SHELL AND TUBE HEAT EXCHANGERS

2,889 SQ. FT. 304SS, 1,090 SQ. FT. 316SS

(2) 316SS PLATE AND FRAME HEAT EXCHANGERS

478.35 SQ. FT., 73.2 SQ. FT.

(3) PUMPS

241 LBS/HR TO 13,000 LBS/HR

 

BEPEX BRIQUETTER SYSTEM

MODEL 300 MS28

SKID MOUNTED

2.5" DIA.

3,000 PSI MAX. OPERATING PRESSURE

22 RPM ROLL SPEED

INCLUDES 300 HP SIEMENS AC MOTOR, FOOTE JONES GEARBOX AND FEED HOPPER

 

316SS 3-EFFECT BUFLOVAK-BLAW KNOX EVAPORATION SYSTEM

36,900 LBS/HR (16,000 KG/HR)

FIRST EFFECT: 1,480 SQ. FT.

SECOND AND THIRD EFFECT: 2,950 SQ. FT.

INCLUDES (3) VAPOR BODIES WITH 1,900 GALLON CAPACITY, (3) STEAM CHESTS AND (2) OVERHEAD CONDENSERS (1,728 SQ. FT AND 1,605 SQ. FT.)

 

304SS STRUTHERS WELLS "KRYSTAL" CRYSTALLIZER SYSTEM

7' DIA. X 60" WITH 9' CONE BOTTOM

THIS UNIT WILL EVAPORATE APPROXIMATELY 4,400 LBS/HR OF H2O (5 LBS PER SQ. FT. SURFACE AREA OF HEATER)

INCLUDES COMPLETE ACCESSORY PACKAGE: VAPORIZER AND SUSPENSION CONTAINER, STEAM CHEST HEATER, 4,000 GALLON 347SS TANK, LIGHTNIN RIGHT ANGLE MIXER, ELBOW PUMP, OVERHEADS CONDENSER AND HYPULSE FILTER

 

25,400 CFM 321SS FULLER FLUIDIZED BED DRYER

12' DIA. CHAMBER

1,555 CU. FT. DRYING CHAMBER CAPACITY

DESIGNED TO DRY 8,560 LBS/HR OF PELLETS (@ 15% MOISTURE) WITH A DENSITY OF 40 LBS/CU. FT.

114,240 LBS/HR AIR FLOW

1,325,000 BTU/HR HEAT TRANSFER

INCLUDES (3) HEATING COILS (40 PSI STEAM) FOR UNDER BED HEATING

Learn More

REFERENCE NUMBER: A-1993

BENINNGER BEN DIRECT WARPER

 

WARPER 1400

YEAR: 1997

MAXIMUM FLANGE WIDTH: 1400

MAXIMUM TUBE WIDTH: 2100

WORKING WIDTH: 1800

 

BENINGER CREEL

YEAR: 2004

MAXIMUM CONES: 468

CONES WITH ROBOT FOR UNLOADING THE CONE OPTIONAL

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-1070 COMPLETE NARROW WOVEN EDGE POLYESTER SATIN FACTORY WORKING FACTORY TO MAKE ELASTIC, RIBBON OR PRINTED LABEL TAPE SUITABLE PRINTING METHODS: ROTARY, SILK-SCREEN, LETTER PRESS, HOT EDGE, STAMPING. NARROW WOVEN EDGE POLYESTER OR SATIN. YOU MAY BUY THIS FACTORY IN PARTS OR ENTIRELY, ACCORDING TO YOUR NEEDS. A THOROUGHLY MODERN PLANT. HUMAN HANDS NEVER TOUCH THE PRODUCT. CONSISTING OF: JACOB MULLER NF LOOMS NEEDLE HEADS PER MACHINE: 6 REED WIDTH: 42 mm MAX. RIBBON WIDTH: APPROX. 40mm MAX. QUANTITY: 68 BENNINGER ERGOTRONIC SECTIONAL WARPER IN PERFECT CONDITION QUANTITY: 1 JACOB MULLER WEBTEX FINISHING MACHINE QUANTITY: 1 JACOB MULLER RAM 500 MEASURING AND ROLLING MACHINE QUANTITY: 1 JACOB MULLER NF AUTOMATIC WINDERS QUANTITY: 78 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1302 (0101GHBXX12) A BENNINGER DIRECT WARPER WITH CREEL WIDTH 2000mm YEAR 1990 DIRECT WARPER WITH CREEL – WIDTH 2000mm YEAR 1990 MAKE: BENNINGER 640 CONE POSITIONS IN CREEL QUANTITY AVAILABLE: 1 Learn More