Search results for: 'Dia'

REFERENCE NUMBER: M-3471 (880OKRSHH7) L NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 4500mm TECHNICAL DATA: RAW MATERIALS: NYLON, POLYESTER, POLYPROPYLENE, GLASS FIBER, ETC. FINENESS OF FIBER: 2.5 TO 10DENIER LENGTH OF FIBER: 38 TO 76mm MIXING RATIO BETWEEN TWO FIBERS: 20 TO 100% SPEED: 6m/min (PER 2.5-6D× 38-51mm) MAX. 5000 KG/DAY (PER 22 HOURS/DAY) RANGE OF GRAM WEIGHT: 100 TO 250g/m2 CARDING MACHINE FEATURES ARE ACCORDING GRAM WEIGHT: 250G/M², 300G/M² PROCESS FLOW CHART: BALE OPENER---PER-OPENER—FINE OPENER--FEEDER---CARDING MACHINE-- CROSSLAPPER--TRANSIT APRON---HIGH-SPEED PRE-NEEDLE LOOM---(2) HIGH-SPEED MAIN NEEDLE LOOM--CALENDER---CUTTER AND REWINDER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: J-1122 (1212KJNMXX11) WOOL SPINNING PLANT- 6264 SPINDLES PREPARATION SPINNING DOUBLE TWISTS RETRACTINOS HUMIDIFICATION QUANTITY AVAILABLE: 1 Learn More

TT-1112 EXTRUSION LAMINATOR, UP TO 2200mm, ONE SIDED LAMINATING MACHINE (480 VOLTS, 3-PHASE, 60Hz) MAIN PROCESS AND PARAMETERS TECHNOLOGICAL PROCESS MAIN UNWINDING, RECTIFYING, EXTRUDING, COMPOUND CUTTING AND REWINDING. MAIN TECHNICAL PARAMETERS 1. RAW MATERIAL: SUITABLE FOR COATING RESIN LDPE, PP AND OTHER COATING BASE MATERIAL. 2. AUXILIARY BASE MATERIAL: PAPER, NON-WOVEN FABRIC, ALUMINUM FILM, WOVEN CLOTH AND OTHER APPLICABLE MATERIALS MECHANICAL SPEED: 60 TO 150 METERS/MINUTE (ACTUAL SPEED DEPENDS ON FILM MATERIAL, FILM WIDTH AND THICKNESS, ETC.) EFFECTIVE WIDTH OF LAMINATING: 1200 TO 2000mm LAMINATING THICKNESS: 0.008 TO 0.080mm LAMINATING THICKNESS ERROR ±5% TENSION SETTING RANGE: 20 TO 200 KG/FULL WIDTH CONSTANT TENSION MAXIMUM EXTRUSION: 200 KG/HOUR INNER DIAMETER OF BASE MATERIAL ROLL CORE: 76mm MACHINE POWER: 100 KW ACTUAL OPERATING POWER IS 50 KW TO 60 KW CONTROL TYPE OF COMPOUND SPEED AND LAMINATING THICKNESS: PLC COMPUTER, FULLY AUTOMATIC ELECTRICAL CONTROL LAMINATING WITH EMBOSSING: SINGLE-LAYER Learn More

T-9483 FULLY AUTOMATIC FOUR EDGE-SEALING GAUZE PACKING MACHINE TECHNICAL PARAMETERS: BAG SIZE: BASED ON CUSTOMER'S REQUEST SPEED: 120~180 BAGS/MIN PACKING MATERIAL: PAPER+PAPER, PAPER+PLASTIC IT CAN HOT SEALING PACKING MATERIAL, PACKAGE MATERIAL DIAMETER Φ ≤ 350mm, WIDTH IS BASED ON CUSTOMER'S REQUEST; VOLTAGE: 3P 380V 50Hz SERVO MOTOR 1.5 KW+SERVO MOTOR: 1 KW+STEPPING MOTOR 110 + STEPPING MOTOR 130 + VARIABLE FREQUENCY MOTOR 0.37KW, TOTALLY 5 MOTORS ARE 4KW USING 28 VOLT SERIES CIRCUIT HEAT, 2 HEATING PANELS, EACH PANEL HAVE 8 PCS HEATING TUBE, EACH TUBE 300W, TOTALLY 4.8KW MACHINE WEIGHT: 800 KG MACHINE SIZE: LENGTH 5000 X WIDTH 1300 X HEIGHT 1600mm WOODEN CARTON SIZE: LENGTH 2600 X WIDTH 1900 X HEIGHT 1800mm Learn More

T-7066 MELTBLOWN NON-WOVEN PRODUCTION LINE- 1600mm (1) EFFECTIVE WIDTH: 1600mm; (2) MAXIMUM COIL DIAMETER: 1200mm; (3) YIELD: 1.5 TO 2.0T /24 HOURS (20G/SQUARE); (4) FILAMENT SIZE: 2UM-5UM; (5) MAIN RAW MATERIALS: POLYPROPYLENE SLICING (MELTING AND SPRAYING SPECIAL MATERIALS) (6) PRODUCT WEIGHT: 15 TO 200G/M2. (7) MECHANICAL SPEED: 10 TO 80M/MIN; (8) INSTALLED CAPACITY: 450KW; (9) EQUIPMENT SIZE: 16000mm×6000mm×6000mm QUANTITY: 1 Learn More

REFERENCE NUMBER: R-7249
CAPACITY: 30 TPD
MAXIMUM DIAMETER : 2000mm
QUANTITY: 1

Learn More

TT-4024 WORSTED SPINNING PLANT WITH 9,650 SPINDLES, SUITABLE FOR COMPACT YARN NM 15-80, YEAR 1983 TO 2006 (10,000 SPINDLES) BLENDING COMBING LINE PREPARATION FINISHER WINDING LINE Learn More

TT-3594 SML 3-LAYER COEXTRUSION CAST FILM LINE, WIDTH 3100mm BRAND: SML EXTRUDERS CONDITION: USED QUANTITY: 1 Learn More

TT-2617 COMPLETE WORSTED SPINNING LINE WITH 9650 SPINDLES, YEAR 1983 TO 2006 THE MACHINES ARE STILL IN PRODUCTION IN VERY GOOD CONDITION. WORSTED SPINNING PLANT WITH 9650 SPINDLES, SUITABLE FOR COMPACT YARN NM 15-80 Learn More

TT-1984 APPLE JUICE FACILITY, 90,000 LBS/HR IN, 15,500 LBS/HR OUT ITEM 001 4-EFFECT EVAPORATOR / CONCENTRATOR, MANUFACTURED BY APV, PREVIOUSLY RUNNING DEPECTINIZED FRUIT JUICE AT RATE OF 170 GPM-IN AT 3-4 BIX, 20 GPM-OUT AT 70 BRIX (90,000 LBS/HR IN, 15,500 LBS/HR OUT). STEAM CONSUMPTION OF 16,000 POUNDS PER HOUR AT 125 PSI. TOWER WATER RUNNING 1,650 GPM AT 50 DEG F. INCLUDES MATCHED CAPACITY UHT PASTEURIZING SYSTEM. EFFECTS CONSIST OF 1A/1B, 2, 3A/3B, 4A, 4B. COMPLETE SYSTEM WITH PLATE HEAT EXCHANGERS, TANKS, PUMPS, AND CONTROLS. ITEM 002 CROSSFLOW MICROFILTRATION SYSTEM, MANUFACTURED BY TECHSEP, WITH CARBOSEP CARBON MEMBRANES. HIGH SIDE AND LOW SIDE EACH RATED FOR 40 GPM FOR A TOTAL OF 80 GPM. CARBOSEP MEMBRANES FEATURE SINTERED CARBON MEMBRANE SUPPORT, METALLIC OXIDE MEMBRANE LAYER, MEASURES 1200MM/47.25 LONG X 10 MM/0.4” OD, 6 MM/0.23” ID, RATED FOR 40 BAR/580 PSI BURSTING PRESSURE, 15 BAR/217 PSI SERVICE PRESSURE, 0 TO 14 SERVICE PH, MICROFILTRATION AT 0.14 MICRONS. STAINLESS STEEL FILTRATION HOUSING MEASURES 9” DIAMETER X 4’ LONG. (3) SKIDS, EACH DRIVEN BY 60 HP GOULDS XLT-X CENTRIFUGAL PUMP. INCLUDES (2) STAINLESS STEEL CARTS OF EXTRA PARTS AND THOUSANDS OF UNUSED SPARE FILTRATION TUBE MEMBRANES STILL IN BOXES. ITEM 003 (2) 10,000 GALLON STAINLESS STEEL TANKS, MEASURES 8’ DIAMETER X 15’ HIGH, SINGLE WALL CONSTRUCTION, INCLUDES 5 HP SIDE AGITATOR MANUFACTURED BY MIXMOR, DRIVEN BY 5 HP MOTOR. FEATURES 4” CENTER BOTTOM DISCHARGE, MANWAY OPENING, AND 7.5 HP TRANSFER PUMP. ITEM 004 GRANULAR DECOLORING CARBON FILTRATION SYSTEM, LAST USED TO PROCESS FRUIT JUICE AT RATE OF 150 GPM. CONSISTS OF (2) FILTRATION COLUMNS, EACH MEASURING 3’ DIAMETER X 16’ HIGH STRAIGHT SIDE, APPROXIMATELY 850 GALLONS WITH DISH TOP AND BOTTOM; 4,000 GALLON STAINLESS STEEL SINGLE WALL “CAUSTIC” TANK WHICH MEASURES 8’ DIAMETER X 10’ HIGH STRAIGHT SIDE, 2,000 GALLON STAINLESS STEEL TANK MEASURING 6’ DIAMETER X 10’ HIGH WITH DISH BOTTOM AND 3” OUTLET; SECONDARY FILTER SKID WITH (2) COLUMNS, EACH MEASURING 8” DIAMETER X 3’ HIGH; 200 GALLON STAINLESS STEEL CIP TANK MEASURING 40” DIAMETER X 32” HIGH WITH DISH TOP; AND 10 HP FRISTAM PUMP. ITEM 005 ALFA LAVAL / DE LAVAL AUTOMATIC DESLUDGING DISC CENTRIFUGE, MODEL BRPX 417 SEV 31CCL – 60/88 – 1008 – 13, MANUFACTURING NUMBER 2982935, RATED FOR MAX SPEED OF 3980 R/M. DRIVEN BY 50 HP, INCLUDES 10 HP TRANSFER PUMP, ALLEN BRADLEY DIGITAL CONTROLS. ITEM 006 WESTFALIA AUTOMATIC DESLUDING DISC CENTRIFUGE, MODEL SB80-06-177, SERIAL # 1668 988, MANUFACTURED IN 1980, RATED FOR MAX BOWL RPM OF 4430, 1.1 KG/DM3 OF HEAVY LIQUID, 1.3 KG/DM3 OF SLOIDS. DRIVEN BY 75 HP TOSHIBA MOTOR, INCLUDES CONTROL PANEL WITH ALLEN BRADLEY TOUCHSCREEN CONTROLS. Learn More