Search results for: 'pressure'

TT-4374 BACK PRESSURE TURBINE – NEW, 8 MW, 60 Hz STEAM TURBINE GENERATOR 8.0 MW NEW NEVER USED SURPLUS SHIN-NIPPON - ABB ALTERNATOR 8.0 MW - 60 Hz, 13.8 KV, SPEED - 7800 / 1800 RPM INLET PRESSURE - 32 BAR A = 465 PSIG TEMPERATURE - 342 DEG. C. = 647.6 DEF. F. EXHAUST STEAM PRESSURE - 0.12 BAR. A = 1.74 PSIG EXTRACTION STEAM PRESS. - 8 BAR. A = 116.03 PSID WITH ABB - 8.0 MW - BACK-END ALTERNATOR, 1800 RPM, 60 Hz, 13.8 KV Learn More

REFERENCE NUMBER: T-6870 MEDICAL FACE MASK AIR EXCHANGE DIFFERENTIAL PRESSURE TESTER, 60Hz MEDICAL FACE MASKS AIR EXCHANGE DIFFERENTIAL PRESSURE TESTER IS SUITABLE FOR DETERMINING THE AIR EXCHANGE DIFFERENTIAL PRESSURE OF MEDICAL FACE MASKS. IT CAN ALSO BE USED FOR THE DETERMINATION OF OTHER TEXTILE MATERIALS. STANDARDS: EN 14683-2014 ASTM F2100-2019 YY 0469-2011 YY 0969-2013 FEATURES: EQUIPPED WITH HIGH PRECISION DIFFERENTIAL PRESSURE SENSOR, DIGITAL DISPLAY OF THE DIFFERENTIAL PRESSURE OF BOTH SIDES OF THE SPECIMEN; SPECIAL SAMPLE HOLDERS TO ENSURE CLAMP THE SPECIMEN FIRMLY. KEY SPECIFICATION: AIR SOURCE: SUCTION TYPE AIRFLOW: 8L/MIN SEALING METHOD: END FACE SEAL DIAMETER OF TEST AREA: Ф25mm RANGE OF DIFFERENTIAL PRESSURE SENSOR: 0 TO 500PA DISPLAY METHOD: DIGITAL DISPLAY OF THE DIFFERENTIAL PRESSURE POWER SUPPLY: AC220V, 60Hz QUANTITY: 1 SET Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

YY-2761 SLOT DIE COATING MACHINE, WORKING WIDTH 1550mm, FOR HOT MELT PRESSURE SENSITIVE ADHESIVE COATING AND LAMINATION APPLICATION: 1. HOT MELT SENSITIVE PRESSURE ADHESIVE COATING AND LAMINATION LINE, IT HAS FUNCTIONS OF COATING, LAMINATION, PEELING, REWINDING FUNCTION. 2. MATERIAL APPLICATION: PET, PVC, PAPER ETC. QUANTITY: 1 Learn More

TT-6589 SIEMENS SST 300 G32 A BACK PRESSURE TURBINE, 22.5MW, YEAR 2008, 50 Hz 1. BRAND: SIEMENS TURBINES 2. MODEL: SIEMENS SST300 3. CONDITION: USED 4. YEAR: 2008 QUANTITY: 1 Learn More

TT-1994 ISC ITALY CANNON A-SYSTEM 100 HIGH PRESSURE DOSING SYSTEM, YEAR 2020 MACHINE TYPE: HIGH PRESSURE DOSING SYSTEM MANUFACTURER: ISC ITALY MODEL: CANNON A-SYSTEM 100 YEAR OF CONSTRUCTION: 2020 CONDITION: GOOD CONDITION (USED) THE METERING MACHINE IS SUITABLE FOR PROCESSING POLYOL AND ISOCYANATE. IN ADDITION, THE A-COMPONENT CAN BE MIXED WITH FILLERS SUCH AS EXPANDED GRAPHITES. DUE TO THE PLUNGER AND THE SPECIAL NOZZLE GEOMETRY, THE MACHINE HAS AN INCREASED SERVICE LIFE. AN AUTOMATIC REFILL FROM THE 200K BARREL SUCKS IN THE RAW MATERIAL. THE VESSEL IS EQUIPPED WITH COMPRESSED AIR CONTROL, ON THE A-COMPONENT EVEN WITH AGITATOR. SHELL AND TUBE HEAT EXCHANGERS WITH CENTRAL COOLING WATER CONNECTION KEEP THE TEMPERATURE CONSTANT. THE PLANT IS AS GOOD AS NEW AND READY FOR IMMEDIATE USE. MACHINE HAS BEEN PROFESSIONALLY FLUSHED WITH MESAMOLL AND TAKEN OUT OF SERVICE. MACHINE CAN BE INSPECTED BY PRIOR APPOINTMENT. THE SALE IS WITHOUT WARRANTY. Learn More

YY-1347 PSA OXYGEN GENERATION SYSTEM SCHEME, CAPACITY 50 m3 PER HOUR PURITY: ≥ 93%, FLOW RATE: 50M3 PER H, (PRESSURE: 200 BAR AUTOMATIC FILLING SYSTEM) Learn More

YY-1348 PSA OXYGEN GENERATION SYSTEM SCHEME, FLOW RATE 100 M3 PER HOUR DETAILS: PURITY: ≥ 93%, FLOW RATE: 100 M3 / H, (PRESSURE: 200 BAR AUTOMATIC FILLING SYSTEM) QUANTITY: 1 Learn More

TT-8614 MORTON AIR PRESSURE WHISK APW 100 AERATOR, CAPACITY 110 LITERS 1. MORTON AIR PRESSURE WHISK 2. BRAND: MORTON 3. MODEL: APW 100 QUANTITY: 1 Learn More

YY-3477 FULLY AUTOMATIC ETO STERILIZER MACHINE, H 2200 X W 2800 X L 8000 mm (INNER SIZE) (DOUBLE DOOR) MILD STEEL BODY SIZE: H 2200 X W 2800 X L 8000 mm (INNER SIZE) (DOUBLE DOOR). CONSTRUCTION OF MATERIAL: CONTACT PART MILD STEEL NON-CONTACT PART MILD STEEL. Learn More