Search results for: 'price k'

TT-4992 GENERAL ELECTRIC 7EA GTG PACKAGED POWER PLANT, 60 Hz, YEAR 2014 GENERAL ELECTRIC 7EA GTG PACKAGED POWER PLANT YEAR: 2014 CONDITION DETAILS: NEVER USED OPERATIONAL STATUS: DISCONNECTED QUANTITY: 1 Learn More

T-7125 CARDING WILLOW, WORKING WIDTH 1500mm TYPE OF FIBRES: ALPACA OR WOOL WILLOW CARDING IS EQUIPPED WITH MECHANICAL AND ELECTRICAL DRIVES CAPACITY: UP TO 1500 KGS/HOUR WORKING WIDTH: 1500mm QUANTITY: 1 Learn More

 How To Choose an N95 Respirator Mask For Coronavirus Prevention? All You Need to Know Before Buying Face Masks.

1. What’s an N95 mask?
An N95 respirator is a respiratory protective face mask, designed to help reduce the user’s exposure to airborne particles including very small particles (0.3 microns) and large droplets. N95 respirator face mask literally has a filtration efficiency of at least 95% against non-oily particles.

2. Differences between N95 mask and surgical mask?
Generally, the N95mask also includes an N95 surgical mask. So, here we will just compare a standard N95 particulate mask with a disposable surgical mask. Surgical masks are designed to be worn by healthcare professionals during surgery and nursing, to help prevent contamination of the surgical field or the patient by capturing liquid droplets that are expelled by the user.
An N95 particulate mask blocks at least 95 percent of very small (0.3 microns) test particles, and while a disposable surgical mask is fluid-resistant and protects the user against large particles (5 microns), droplets, sprays or splatter. 
Different from a loose-fitting, disposable surgical mask, an N5 mask is tight-fitting to achieve a very close facial fit, which guarantees a minimal leakage around the edges of the mask when the user inhales. If properly fitted, the filtration capabilities of N95 respirators exceed those of disposable surgical face masks.

Speaking of the N95 mask price and disposable surgical mask price, the N95 respirator mask is pricier than a surgical mask. In contrast, the N95 mask is reusable but the common surgical mask is disposable. Strictly speaking, N95 respirator masks should be worn for a maximum of eight hours while the disposable surgical mask is recommended to be replaced every four hours. 
However, during the novel coronavirus outbreak, face masks are in short supply and everyone discards one or two face masks every day. A surgical mask could be used for a whole day in a good condition of no damage, no moisture, and no deformation. According to some researches, the N95 respirator mask used for two days still maintains a filtration efficiency of at least 95%, while the filtration efficiency of an N95 respirator used for three days reduced to 94.7%. So, if an N95 respirator is in good maintenance, you can wear it for at least 2 days, a week, maybe even a month.

3. Types of N95 mask
Generally, according to their intended use, the types of N95 masks include the standard N95 particulate respirators and N95 surgical respirator masks. Additionally, there are N95 masks with a breathing valve or not.

1) Differences between standard N95 particulate respirator and N95 surgical mask:
How to differentiate standard N95 particulate-filtering respirators and N95 surgical masks? The N95 surgical mask is literally a combination of N95 respirator and surgical mask, it is both certificated by NIOSH as an N95 respirator and also cleared by the FDA as a surgical mask. N95 surgical respirator masks are also referred to as medical respirators, healthcare respirators, or surgical N95s. 
The significant difference between a standard N95 particulate respirator and an N95 surgical mask is that the N95 surgical mask is fluid-resistant while the standard N95 particulate respirator is not. 
An N95 particulate respirator, also called N95 dust mask or N95 pollution mask, helps reduce very small particles inhaled by the user, and it is used for respiratory protection when the user might be exposed to particulate hazards. With a fluid resistance plus, an N95 surgical mask help reduce particles both inhaled and exhaled by the user, it is designed to be used during surgery and nursing tasks, whatever the user requires respiratory protection, expelled particulates or requires fluid resistance. 

2) Differences between N95 masks with a breathing valve or not:
Many people question: Is an N95 mask with an exhalation valve better than the one without a valve? 
In fact, the N95 respirators with an exhalation valve are not recommended to be used for coronavirus prevention, because the valve is a one-way vent that couldn’t keep your exhalation to yourself. It means that this valved N95 mask makes your breathing out easier and helps reduce heat build-up to avoid fogging up your glasses, however, it’s not that friendly to others. 
Besides, the N95 mask with the valve is pricier than the one without a valve.

4. What are the differences between N95, KN95, FFP2, and KF94?
When you search for the N95 respirators, there are many respirators such as KN95, FFP2, and KF94 that appeared in the same breath. What’s different between these respirators of different letters? 
Actually, both the N95, KN95, FFP2 and KF94 respirators have almost the same filtration efficiency, it means that KN95, FFP2, and KF94 are as effective as the N95 respirator mask. The main difference between these respirators is that they are tested by different nations. 
The N95 mask has a full name of NIOSH-certified N95 respirator, which means these respirators are tested of 95% filtration and certified by the U.S. National Institute of Occupational Safety and Health (NIOSH). The KN95 respirator is a particulate-filtering mask tested using the China criteria. The FFP2 is a filtering facepiece score of 94% filter capacity approved by Europe, and the KF94 is tested by Korea criteria.
To simply put, we could put these respirators into an equation as below:
N100 (99.97%) = FFP3 (99.95%) > N95 (95%) = KN95 (95%) = FFP2 (94%) = KF94 (94%) > KN90 (90%).

Anti Virus Flu Mask Meets FFP2 N95 KN95 KF94 Guidance

Learn More

P-5046 TRABATTONI ROASTER 10 KILOS

TRABATTONI
ROASTER
10 KILOS
BEST MACHINE FOR WHOLESALE/RETAIL WITH A "SALES" APPEAL! THE COOLING BIN ON THE FRONT IS DOUBLE SIZED TO PROVIDE ROOM FOR BOTH MIXING AND BLENDING. THIS IS A RUGGED SOLID TRADITIONAL APPROACH TO ROASTING WITH AN IMAGE. BUILT FROM CAST IRON BASE AND FOUNDATION - THIS DOUBLE WALL DRUM ROASTER CAN BE BUILT IN GAS, PROPANE OR EVEN WOOD FIRED. IF WOOD FIRED, THEN THE ELECTRICAL PANEL WILL BE MOVED. THE CHAFF COLLECTOR CONNECTS IN ANY POSITIONS TO THE REAR OF THE MACHINE. COMES IN RED COLOR UNLESS OTHERWISE SPECIFIED. CUSTOMIZED DESTONER SIZE OPTION AS WELL AS THE AIR
SUCTION ADJUSTMENTS. CRATING INCLUDED IN THE PRICE.

FEATURES:
DIMENSION: 42" WIDE X 69" DEEP X 67"TALL & 24" CHAFF NET WEIGHT: 1,450 POUNDS EXHAUST TUBE TO OUTSIDE: 6" COOLING TUBE: 6" ELECTRIC POWER REQUIRED: 1.1 KW HEATING: 14,000 KCAL/H WITH GAS, PROPANE, OIL, OR WOOD FIRED WOOD FIRED UNITS AVAILABLE - PLEASE CALL FOR PRICE. STAINLESS STEEL CHAFF COLLECTOR IN REAR- ALLOW 24" SPACE

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-2246 FOAM DRILLING MACHINE-FOR FOAM MATTRESS 2200 X 2200 X 1800mm MODEL F26 LOADING CONVEYOR 2100 X 2100mm UNLOADING CONVEYOR 2100 X 2100mm MAX. DRILLING WIDTH 2100mm MAXIJMUM LENGTH 2100mm MAX. DRILLING HEIGHT 180mm HOLE DIAMETER 6-30mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-5882 COMPLETE WORSTED SPINNING LINE COMPLETE WORSTED SPINNING LINE REBREAKING DEPT 1 x GVE 100 ELECTICAL KIER TECNOIMPIANTI YEAR: 2001 1 x SYDEL 679 STEAMING AND STRETCHING MACHINE YEAR: 1988 PREPARATION DEPT 1 x NSC SCHLUMBERGER R5L 10/GC 13 TYPE 57 YEAR: 1989 1 x GILL NSC- GC 13 WITH AUTO LEVELER YEAR: 1988 1 x SANT'ANDREA SH 22 (TWIN HEAD DRAWER) WITH AUTOLEVER YEAR: 1988 SALE PRICE: €5K 1 x SANT'ANDREA SH 24 (FOUR HEAD DRAWER) WITH AUTOLEVER YEAR: 1988 SALE PRICE: €5K 1 x NSC SHLUMBERGER FMV 30 VERTICAL FINISHER WITH AUTO DOFFER YEAR: 1987 SPINNING DEPT 2 x ZINSER 421 E SPINNING FRAMES, 580 SPINDLES, DIAMETER 51MM, YEAR: 1994 2 x SCHLAFHORST AUTOCONER LINKER WITH ZINSER, 20 HEADS, USTER D4 CLEANER YEAR: 1994 2 x ZINSER 421 E SPINNING FRAMES, 580 SPINDLES, DIAMETER 51MM, YEAR: 1995 2 x SCHLAFHORST AUTOCONER LINK WITH ZINSER, 20 HEADS, USTER POLYMATIC CLEANER YEAR: 1994 QUANTITY AVAILABLE: 1 Learn More

P-5078 JOPER CAST IRON SHOP BATCH ROASTER 25 KILOS

THE NEW JOPER CAST IRON ROASTER - THE TIMELESS TRADITION OF THE FAMOUS UG22 - IMPROVED AND PRESERVED. WITH GREAT CONTROL OPTIONS AS WELL. PATTERNED AFTER AND IMPROVED UPON THE FAMOUS UG22.

ATTRIBUTES SIMILAR TO PROBAT. CAST IRON CONSTRUCTION. ROASTING PROCESS USES HOT AIR SYSTEM AND HAS
CYCLONE SEPARATE FROM ROASTER. CYLINDER IS NOT DRILLED AND HAS SPECIAL BLADES WHICH PROVIDES EXCELLENT MOVEMENT OF THE BEANS. COMPLETE ELECTRIC CONTROL BOARD WHICH STARTS THE ROASTING CYCLE AND BUILT IN SOUND AND LIGHT ALARMS.
TWO MODELS: GAS AND PROFILE (AUTOMATIC)

JOPER CAST IRON SHOP BATCH 25 KILO ROASTER

THE NEW JOPER CAST IRON ROASTER - THE TIMELESS TRADITION OF THE FAMOUS UG22 - IMPROVED AND PRESERVED. WITH GREAT CONTROL OPTIONS AS WELL. PATTERNED AFTER AND IMPROVED UPON THE FAMOUS UG22.

ATTRIBUTES SIMILAR TO PROBAT. CAST IRON CONSTRUCTION. ROASTING PROCESS USES HOT AIR SYSTEM AND HAS
CYCLONE SEPARATE FROM ROASTER. CYLINDER IS NOT DRILLED AND HAS SPECIAL BLADES WHICH PROVIDES EXCELLENT MOVEMENT OF THE BEANS. COMPLETE ELECTRIC CONTROL BOARD WHICH STARTS THE ROASTING CYCLE AND BUILT IN SOUND AND LIGHT ALARMS.
TWO MODELS: GAS AND PROFILE (AUTOMATIC)

PRICES
MODEL BSR25 - 25 KILO GAS OR PROPANE $46,560
MODEL BPR25 - 25 KILO ROAST PROFILE SYSTEM $54,690
OPTIONAL ACCESSORIES:
JOPER DESTONER (INCLUDES FAN) $8,500
JOPER GREEN BEAN LOADER $7,030
CUSTOM COLOR AVAILABLE. SEE RAL COLOR CHART BELOW.

NOTE: CRATING AND FREIGHT COSTS ARE NOT INCLUDED. ORIGIN IS EUROPE.

DUE TO THE HUGE INCREASE IN ORDERS WE NOW HAVE TO CONTEND WITH LEAD TIMES FOR 5 TO 7 MONTHS AND MAYBE A LITTLE LONGER IN SOME CASES . . . FRUSTRATING, BUT REAL.

PROFILE ROAST CONTROL OPTION

THE JOPER 25 KILO ROASTER OPTION WITH THE TOUCH SCREEN PROFILE CONTROL COMES WITH A BRIGUS COFFEE ROAST CONTROL & LOG SYSTEM. THIS WAS SPECIALLY CREATED TO WORK WITH THE BPR ROASTERS FROM JOPER. TOGETHER, THEY ARE THE TRUE MASTER OF COFFEE ROAST. BRIGUS (BRE 'GOS) IS A NEW CONCEPT OF COFFEE ROASTING CONTROL SYSTEM.
WITH IT, ATTENTION AND EXPERTISE WILL BE CONCENTRATED ON WHAT MATTERS:
DEFINE NEW PROFILES BASED ON STORED ONES
ROAST BASED ON A PRE-DEFINED PROFILE
MANUAL OR AUTOMATIC PROCESS CONTROL
ROASTING VS. DESIRED PROFILE EVOLUTION DURING PROCESS
REGISTER OCCURRENCES, EVENTS AND NOTES
RECORD ALL PROCESS
ANALYZE AND COMPARE ROAST BATCHES

TECHNICAL SPECIFICATIONS FOR BSR-25 & BPR-25:
BATCH CAPACITY: 25 KG. / 55 POUNDS
CONTROL DESIGN: MANUAL
CAPACITY PER HOUR: 100 KG. / 220 POUNDS
ROASTING TIME: 15-18 MIN.
EXHAUST AIR TREATMENT: OPTIONAL
COOLING TIME: 3 MIN.
TYPE OF COOLING: AIR AMBIENT
SAFETY DEVICE: YES
OPERATION TYPE BURNER: MODULATING
FUEL TYPE (GAS OVEN): PROPANE OR NATURAL GAS
POWER REQUIREMENTS: 20 AMP
VOLTAGE: 380/50/3 OR 230/60/3 V/HZ/PH
Ø EXHAUST CHIMNEY (ROASTER CYCLONE): 150 MM / 5.9 INCHES
Ø EXHAUST CHIMNEY (COOLER): 150 MM / 5.9 INCHES
ROASTER WEIGHT WITH COOLER AND CYCLONE: 850 KG. / 1874 POUNDS
BURNER POWER: 52 KW / 177431 BTU
ROASTER FAN MOTOR: 1,5 HP
COOLER FAN MOTOR: 2 HP
DRUM GEARBOX: 1 HP
COOLER GEARBOX: 0,75 HP
ROASTER FAN (NORMAL WORK CONDITIONS RUNNING AT 60HZ. DAMPER 70 %): 587 M3/H/345 CFM (587 X .589= X 345 CFM)
COOLER FAN (RUNNING AT 60HZ): 1465 M3/H/862 CFM
BUILT TO UL295 STANDARDS.

QUANTITY: 1

Learn More

TT-8474 EREMA PC1007T FILM RECLAIM LINE UPTO 430 KGS PER HOUR, 42 KW, YEAR 2012 1. BRAND: EREMA 2. MODEL PC1007T 3. SINCE YEAR 2012 4. CATEGORY EXTRUDERS AND EXTRUSION PLANTS 5. CONDITION USED 6. CAPACITY 430 KG PER HOUR 7. POWER 42 KW 8. DELIVERY TIME 1 WEEK 9. RATED AT 350 TO 430 KGS/HOUR ON LDPE AND LLDPE AND 300 KGS/HOUR ON HDPE. QUANTITY: 1 Learn More

J-4517 REBUILT/RUNNING CONDITION PELLETIZING LINE, STRAND TYPE, MODEL BCC38 EXTRUDER, 30:1 L/D RATIO Learn More

J-3943 CONVOLUTER, MAXIMUM WORKING WIDTH 2150mm (84”) DELIVERY 3RD WEEK OF NOVEMBER 2021 IN ALMOST NEW CONDITION LOCATED IN THE UNITED STATES CONVOLUTING WIDTH MAX: W 2150 mm (84") CONVOLUTING PIN DEPTH: 30 mm (1.18") CONVOLUTING RUNNING SPEED: 0 TO 25 RPM TOTAL POWER: 10.74 KW CUTTING SPEED: 0 TO 25 METERS PER MINUTE CUTTER BLADE TOTAL LENGTH: 9800 mm BLADE WIDTH x THICKNESS: 50mm x 0.65mm MACHINE WEIGHT: 2500 KG MACHINE OVERALL DIMENSIONS: 15.4 FEET WIDE X 4.1 FEET DEEP X 5 FEET TALL MAXIMUM HEIGHT OF FOAM: 200mm (8”) QUANTITY: 1 Learn More