Search results for: 'HIGH PRE'

YY-2370 UNUSED WATERMAKERS, CAPACITY 50 M3 PER 24H, QUANTITY 2 WATERMAKER PRODUCES DRINKING WATER FROM SEA WATER BASED UPON THE REVERSE OSMOSIS MEMBRANE TECHNIQUE. THE CAPACITY IS 50M3/24H FROM SEAWATER (25OC). THE QUALITY OF THE DRINKING WATER IS CONTINUOUSLY MONITORED BY A SALINITY METER. THE DESIGN IS IDEAL FOR SIMPLE SERVICE AND MAINTENANCE. THE UNIT IS SUITABLE FOR: - DRILLING PLATFORMS; - OFFSHORE RIGS AND ACCOMMODATION PLATFORMS; - COMMERCIAL VESSELS; - MILITARY VESSELS; - RESORTS, HOTELS AND COMMUNITIES; - GOLF COURSES. QUANTITY: 2 Learn More

TT-1678 ROUND CLEANING PAD MAKING MACHINE WITH EMBOSSING, WIDTH 380mm MOTHER ROLL WIDTH: 380mm OUTPUT LINE: 6 LINES MOTHER ROLL QUANTITY: 4 PIECES FINISHED PAD DIAMETER: 57mm MOTHER ROLL MATERIAL: SPUNLACE NON-WOVEN FABRIC PRODUCTION SPEED: 2500 TO 3000 PIECES/MINUTE RATED VOLTAGE: 380 VOLTS (OR 220 VOLTS) RATED FREQUENCY: 50Hz (OR 60 Hz) TOTAL POWER: 3.5 KW DIMENSIONS: LENGTH 5500mm × WIDTH 1200mm × HEIGHT 2000mm WEIGHT: 2500 KG QUANTITY: 1 Learn More

TT-1431 SLOT DIE COATING MACHINE, COATING WIDTH 1600mm PARAMETERS 1. COATING METHOD: SLOT DIE COATING 2. MAX. COATING WIDTH: 1600mm 3. COATING WEIGHT: 50 TO 300 GSM 4. UNIFORMITY: ≤10% 5. MECHANICAL SPEED: 1 TO 20 METERS PER MINUTE 6. COATING SPEED: THE COATING SPEED IS DETERMINED ACCORDING TO THE COATING WEIGHT, QUANTITY, ADHESIVE VISCOSITY, THE TEMPERATURE AND THE SUBSTRATE. 7. ROLLER WIDTH: 1750mm (ACTUAL WORKING WIDTH OF PAPER ROLL IS 1600mm) 8. MAX. UNWINDING DIAMETER: 1250mm 9. MAX. REWINDING DIAMETER: 950mm 10. UNWINDING TENSION: ≤600N 11. FILM UNWINDING TENSION: ≤200N 12. WINDING TENSION: ≤600N 13. GLUE MELTING SPEED: 310 KG/HOUR 14. GLUE INPUT HOSE: TEFLON TUBE 15. GLUE MELTING TEMPERATURE: ABOUT 260°C MAXIMUM 16. MECHANICAL POWER: ABOUT 40 KW 17. INSTALLED POWER: ABOUT 110 KW 18. POWER SUPPLY: ABOUT 440 VOLTS, 60Hz 19. AIR SOURCE: 0.6 TO 0.8 MPA 20. WATER SOURCE: 0.15 TO 0.4 MPA CIRCULATING COOLING WATER 21. DIMENSIONS: 9000 (LENGTH) X 6600 (WIDTH) X 2300mm 22. THE AMOUNT OF GLUE AND THE GLUE SPEED ARE TRACKED SYNCHRONOUSLY, AND CAN ALSO BE ADJUSTED INDEPENDENTLY QUANTITY: 1 Learn More

TT-1316 NONWOVEN MIDDLE SPEED NEEDLE LOOM, WORKING WIDTH 3200mm MACHINE STRUCTURE FEATURES: 1. SPLICING TYPE STRUCTURE, IT IS MADE BY HIGH QUALITY Q235 STEEL PLATE WELDING, THEN FINE TEMPERING QUALITATIVELY WITH SUFFICIENT COMPLETENESS AND STABILITY. UPPER AND DOWN MACHINE GIRDERS BOTH PRECISELY PROCESSING MACHINED. 2. ECCENTRIC BEARINGS ADOPT TORRINGTON FAMOUS BRAND 3. MAIN SHAFT IS USING 42CROMO MATERIAL. AFTER CONDITIONING TREATMENT FINE FINISHING AND GRINDING. 4. NEEDLE GIRDER HIGH SPEED TURBINE ELECTRIC LIFTING, STRIPPER PLATE TURBINE ELECTRIC LIFTING, NEEDLE GIRDER ROLLER SCALE DISPLAY. AIR LOCKED THE NEEDLE PLATE TIGHTLY. 5. NEEDLE PLATE LUOYANG MADE BY MAGNESIUM ALLOY DIE CASTING PLATE COMPOSITE PU, RADON ARRANGE NEEDLES HOLE φ1.82mm 6. INPUT PVC LATTICE, OUTPUT ROLLER ADOPTS φ155mm, HIGH QUALITY SEAMLESS STEEL PIPE, AFTER FINISHING GRINDING, THE SURFACE IS PLATED WITH HARD CHROME, UPPER ROLLER ADJUSTABLE HEIGHT AIR CYLINDER. 7. MAIN MOTOR, OUTPUT ROLLER ALL FREQUENCY CONTROL. 8. INSTALLED POWER: AROUND 15.5KW, MAIN MOTOR 11 KW. QUANTITY: 1 SET Learn More

YY-2126 DOUBLE M-SPRING AUTOMATIC CNC GUARD SPRING MACHINE, PRODUCTIVITY 20 TO 25 PCS PER MINUTE TECHNICAL PARAMETERS: WIRE GAUGE: 2.8 TO 4.00mm ARM LENGTH: 230 TO 330mm HEIGHT: 130 TO 200mm RING TURN: 1 TO 2 RING DIAMETER: 23 TO 40mm PRODUCTIVITY: 20 TO 25 PCS/MIN MOTOR POWER: 12KW POWER SUPPLY: 380V WEIGHT: 1500KG DOUBLE M EDGE GUARD IS OPTIONAL FOR CUSTOMER QUANTITY: 1 Learn More

REFERENCE NUMBER: J-4363 AUTOMATIC PET PAD MAKING MACHINE, 200 PADS PER MINUTE FOR PRODUCTS 450 TO 1500mm, COTTON CORE BETWEEN 400 TO 1000mm TOUCH SCREEN WITH ADJUSTABLE PRODUCT REQUIREMENTS IN 450 TO 600mm, COTTON CORE IN 400 TO 550mm PRODUCT STRUCTURE: SURFACE LAYER, BACKING PAPER, COTTON CORE, SAP, BASEMENT MEMBRANE STABLE PRODUCTION SPEED: 120 METERS PER MINUTE IF THE SIZE OF THE FINISHED PRODUCT IS 600 x 600mm, THE MACHINE RUNNING SPEED IS 200 PIECES PER MINUTE (8 HOUR OUTPUT IS 96,000 PIECES) MACHINE DIMENSIONS: 16000 x 2200 x 2600mm (LENGTH x WIDTH x HEIGHT) POWER SUPPLY: 380 VOLTS, 50 Hz TOTAL POWER: ABOUT 80 KW (NOT INCLUDING GLUE) PRESSURE: 1100 LITERS PER MINUTE, 6 TO 8 BARS YIELD: 98% OR GREATER (EXCLUDING ERRORS DUE TO GLUE MACHINE, MATERIAL EXCHANGE AND JOINTS CAUSED BY DEFECTIVE GOODS) QUANTITY: 1 Learn More

J-4109 HIGH-SPEED ELECTRONIC BAR TACKING SEWING MACHINE, LIFT HEIGHT 117mm, THROAT 280mm HIGH QUALITY DIE STEEL GUARANTEES RIGIDITY, REDUCES DEFORMATION AND MAKES THE HEAD SEPARATION SMOOTH QUANTITY: 1 Learn More

A-2591 100L/200L HOMOGENIZING AND MIXING TANK (NEW) 100L HOMOGENIZING AND MIXING TANK (BOTTOM HOMOGENIZER & BUTTON CONTROL) • DESIGN CAPACITY: 125 L, WORKING CAPACITY: 100 L • ELECTRIC HEATING • MIXING: FIXED STIRRER + WALL - SCRATCHING AGITATOR + PTFE BLADES POWER: 2.2 KW, SIEMENS JV BRAND • FREQUENCY SPEED ADJUSTABLE, 0 TO 63 RPM, DELTA ORIGINAL BRAND • HOMOGENIZING: BOTTOM CENTER INSERT HIGH SHEAR HOMOGENIZER POWER: 4 KW FREQUENCY SPEED ADJUSTABLE: 0 TO 3000 RPM, DELTA ORIGINAL BRAND • ROTOR AND STATER INCORPORATES WIRE - CUTTING FINISH MACHINING, POLISHING TREATMENT BEFORE ASSEMBLY, AXIS INCORPORATE DYNAMIC BALANCE PROCESSING • BUTTON CONTROL, WATER - PROOF ELECTRICITY CONTROL BOX • ALL MOTOR: EX – PROOF QUANTITY: 1 SET 200L HOMOGENIZING AND MIXING TANK (BOTTOM HOMOGENIZER & BUTTON CONTROL) • DESIGN CAPACITY: 250 L WORKING CAPACITY: 200 L • ELECTRIC HEATING • MIXING: FIXED STIRRER + WALL - SCRATCHING AGITATOR + PTFE BLADES • POWER: 2.2 KW, SIEMENS JV BRAND • FREQUENCY SPEED ADJUSTABLE, 0 TO 63 RPM, DELTA ORIGINAL BRAND • HOMOGENIZING: BOTTOM CENTER INSERT HIGH SHEAR HOMOGENIZER • POWER: 4 KW • FREQUENCY SPEED ADJUSTABLE: 0 TO 3000 RPM, DELTA ORIGINAL BRAND • ROTOR AND STATER INCORPORATES WIRE - CUTTING FINISH MACHINING, POLISHING TREATMENT BEFORE ASSEMBLY, AXIS INCORPORATE DYNAMIC BALANCE PROCESSING • BUTTON CONTROL, WATER - PROOF ELECTRICITY CONTROL BOX • ALL MOTOR:EX-PROOF QUANTITY: 1 SET Learn More

A-2502 PUR LAMINATING MACHINE MODE SPECIFICATION: 240 X 1350 mm BOARD LENGTH: ANY MORE THAN 600 mm BOARD THICKNESS: 3 TO 50 mm BOARD WIDTH: 1220 mm OUTER DIMENSION OF MACHINE: 14100 X 2300 X 2500 mm RATE OF MATERIAL DELIVER: 1 TO 25 M/min GENERAL POWER: 46 KW TEMPERATURE MEASUREMENT SYSTEM: GERMANY IMPAC PRINCIPAL AXIS ROLLER DIAMETER: 320 mm MACHINE WEIGHT: 6000 KG PAPER WIDTH: 1280 mm Learn More

REFERENCE NUMBER: A-2492 1000 L STABILITY CHAMBER SPECIFICATIONS: INNER CHAMBER SIZE: 1 X 1 X 1 mm EXTERNAL DIMENSION: 1.2 X 1.97 X 2.17 mm TEMPERATURE RANGE: 70 TO 180°C HUMIDITY RANGE: 10% TO 98% RH, WHEN THE TEMPERATURE IS ABOVE 60°C, THE HUMIDITY CAN ACHIEVE 10% RH TEMPERATURE & HUMIDITY FLUCTUATION: ±0.2℃, ±0.5% RH INDICATION RESOLUTION: 0.01℃, 0.1% RH TEMPERATURE & HUMIDITY UNIFORMITY: ±2℃, ±3% RH (TESTED WITH THE EMPTY CHAMBER, 30 MINUTES AFTER STABILIZATION) HEAT UP AND COOL DOWN TIME: HEATING RATE: AVERAGE 3 ℃/MINUTES; COOLING RATE: AVERAGE 1 ℃/MINUTE (UNLOADED TEST) MATERIAL: INNER CHAMBER: SUS#304 STAINLESS STEEL EXTERIOR STRUCTURE: STAINLESS STEEL PLATE + POWDER COATED INSULATION: GLASS WOOL & PUF PERSPIRATION RESISTANT: K STYLE TUBE ACCESSORIES • TEMPERATURE RESISTANT SILICONE GASKET: 1 PC • CABLE PORT:1 PC; OD: 100 mm • WINDOW LIGHT: 1 PC • MULTIPANE VIEW WINDOW: 1 PC • LOADING SHELVES: 2 PCS REFRIGERATION & HEATING SYSTEM • ORIGINAL IMPORTED HIGH EFFICIENCY COMPRESSOR • AIR COOLING CONDENSER • FIN – TUBE HEATER • ORIGINAL IMPORTED SOLENOID VALVES • INNER SPIRAL K – TYPE REFRIGERANT COPPER TUBE • U – TYPE FINNED ELECTRO - THERMAL TUBE • HEATING & COOLING SYSTEMS SEPARATED • SINGLE STAGE REFRIGERATING SYSTEM HUMIDIFYING & DEHUMIDIFYING SYSTEM • ELECTRIC & BYTE TYPE HUMIDIFYING SYSTEM • STAINLESS STEEL HUMIDIFYING BARREL WITH VIEW WINDOW FOR WATER LEVEL • ADP DEHUMIDIFYING WAY • OVER – TEMPERATURE AND OVERFLOW PROTECTION UNITS • HUMIDIFYING & DEHUMIDIFYING SYSTEMS SEPARATED CIRCLING & DRAIN SYSTEM • CENTRIFUGAL FAN & IMPORTED MOTOR • REVERSE UNIFLOW (AIR FLOW DIRECTION) • FLOW – THROWS WIND • DRAIN SYSTEM USES SWIRL TYPE OUTLET AND U – TRAP DEPOSITION UNIT PROGRAMABLE MICRO COMPUTER LCD TOUCH CONTROLLER • PROGRAMMABLE TOUCH CONTROLLER, USER - FRIENDLY, STABLE AND EASY USE • PROGRAMS: 99 SEGMENTS PER PROGRAM, 120 PROGRAMS, 120 CYCLING PER PROGRAM • PID & SSR CONTROL WAY, STABLE AND EASY USE • HAVE SLOP CONTROL FUNCTION FOR HEATING & COOLING, LINKED PTNS CAN BE EXECUTED • PID AUTOMATIC CALCULATION • MICRO COMPUTER MULTI FUNCTION CONTROLLER, MAIN COMPONENTS ’DATA AUTOMATICALLY OUTPUT INCLUDING COMPRESSORS, SOLENOIDS, HEATING UNITS, ETC • ERRORS OF MAIN COMPONENTS APPEAR ON THE LCD PANEL • THE BRIGHTNESS OF THE LCD PANEL CAN BE ADJUSTED • TIME SEQUENCE CONTROL INTERFACE RELAYS HAVE 3 GROUPS WHICH MANAGE THE OUTPUT OF OUTSIDE LOGIC UNITS INCLUDING SIGNAL, MECHANICAL AND POWER, ETC • PROGRAMS AUTO – SAVE FUNCTION IF POWER CUT OFF SUDDENLY • HAVE HOLD & ADV BUTTONS INPROGRAMS • AUTOMATICALLY SET THE HIGH & LOW TEMPERATURE LIMITS AFTER PROGRAMS SET • PASSWORD SET FUNCTION • SD CARD SLOT, 2 GB SD CARD, RS232 OR ETHERNET (RJ45) OPERATING ENVIRONMENT • AMBIENT TEMPERATURE: +25℃ (2) RH ≤85% PROTECTION • ELECTRICITY LEAK PROTECTION • LIGHTNING STRIKE PROTECTION, ZRN LIGHTNING ARRESTER INSIDE THE CONTROLLER • SENSOR DATES TRANSFERRED INSIDE THE MICRO COMPUTER • TEMP. SENSORS TO OPEN CIRCUIT OR SHORT CIRCUIT (+ - OVER) • THE FIRST LEVEL OVER TEMPERATURE PROTECTION • ERROR DETECTED UNITS • THE SECOND LEVEL OVER TEMPERATURE PROTECTION TO ELECTRONIC OVER - TEMP PROTECTION UNIT • THE THIRD LEVEL OVER - TEMPERATURE PROTECTION • COMPRESSOR PROTECTION TO REFRIGERANTS PRESSURE PROTECTION & OVERLOAD PROTECTION. • EXTENDED PROTECTION UNIT TO TWO SUPPLETIVE PORTS • ERROR PROTECTION TO POWER CUT OFF, ERROR REPORTS SHOWN IN LCD PANEL AND AUDIBLE ALARM STARTS • DYNAMIC HIGH AND LOW TEMPERATURE PROTECTION • AMBIENT TEMPERATURE PROTECTION TO THE INNER CHAMBER AND SPECIMENS AUTOMATICALLY RETURN BACK TO AMBIENT TEMPERATURE AFTER THE OPERATION STOP SAFETY PROTECTION • NON-FUSE PROTECTION SWITCH • OVERHEAT ALARM PROTECTION • COMPRESSOR OVERLOAD PROTECTION • PHASE SEQUENCE PROTECTION • MOTOR OVER TO CURRENT PROTECTION Learn More