Search results for: 'air+in'

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

TT-8253 MWM 2032V16, 4.2 MW EACH, NATURAL GAS, YEAR 2009, 50Hz 1. BRAND: MWM 2. MODEL: 2032V16 3. FUEL: NATURAL GAS 4. YEAR OF CONSTRUCTION: 2009 5. OPERATING HOURS: 41,600 (AVERAGE) 6. MAJOR OVERHAUL E60: 2015 (AT AVERAGE 33.600 HOURS) 7. MOTHBALLED: 2019 8. ALTERNATOR: AVK 9. FREQUENCY: 50Hz 10. VOLTAGE: 11 KV QUANTITY: 14 Learn More

TT-8205 EUROLLS MULTIPLE WIRE DRAWING MACHINE - DRY, YEAR 2006 1. BRAND: TEAM MECCANICA / EUROLLS 2. SECOND-HAND 3. TYPE: 6 BLOCKS 4. YEAR OF CONSTRUCTION 2006 Learn More

TT-8062 GE MS-5001-PA GENERATOR SET - NEW, 26MW, NATURAL GAS, 60 Hz, YEAR 2014 1. GE NATURAL GAS GENERATOR 2. NEW 26MW 3. IT IS 60 Hz UNIT. NOT ECONOMICAL TO CONVERT TO 50 Hz 4. NEW 5. NEVER INSTALLED Learn More

TT-7743 MAN-ROLAND 704-3B, 4 COLORS, 740 X 1050mm, YEAR 2015 1. MAN-ROLAND 704-3B 2. YEAR 2015 3. 4 COLORS OFFSET PRESS 4. FORMAT: 740 X 1050mm QUANTITY: 1 Learn More

TT-5061 HEIDELBERG SPEEDMASTER XL 75-8 P+LX, SIZE 530 X 750mm, 8 COLORS, YEAR 2008 HEIDELBERG SPEEDMASTER XL 75-8 P+LX YEAR: 2008 (POST DRUPA) IMPRESSION COUNT: ONLY 113 MIO IMP. 8 COLORS + COATER OFFSET PRESS OF SIZE 530 X 750mm (C-SIZE) QUANTITY: 1 Learn More

T-4368 SOLAR TAURUS 60 HOUSED GENERATING SET, YEAR 2001 – 5200 KW – 60 Hz MANUFACTURER: SOLAR TURBINES CONDITION: USED CAPACITY: 5200 KW QUANTITY: 2 Learn More

TT-7485 DAVIS STANDARD (SUPER BLUE) EXTRUDERS - 24:1 & 30:1 AIR COOLED, 75mm, YEAR 2013 TO 2015 1. DAVIS STANDARD SUPER BLUE EXTRUDERS 24:1 & 30:1 - AIR COOLED 2. 75mm 3. YEAR 2013 TO 2015 QUANTITY: 1 Learn More

TT-7414 FIRE EXTINGUISHER DIESEL PUMP TC12F, 750 USGPM @ 125 PSI, 60Hz QUANTITY: 1 Learn More

TT-7216 BRUCKNER STENTER, WORKING WIDTH 2600mm, YEAR 2008 1. STABILIZER FRAME 2. BRAND: BRUCKNER, TYPE: POWER FRAME-SPLIT FLOW, VN 26/6 3. YEAR 2008 QUANTITY: 1 Learn More