Search results for: 'gas comp'

T-6552 MASK AIR TIGHTNESS TESTER

Compare

REFERENCE NUMBER: T-6552

MASK AIR TIGHTNESS TESTER

HOW TO CHOOSE A HIGH-QUALITY MASK NOT ONLY DEPENDS ON THE FILTERING EFFICIENCY OF THEMASK, BUT ALSO TO CONFIRM WHETHER THE MASK IS COMPLETELY IN CONTACT WITH THE FACE, OTHERWISE AEROSOL PARTICLES SUCH AS GERMS THAT HAVE NOT BEEN FILTERED BY THE MASK WILL BE INHALED FROM THE INADEQUATE ADHESION. THEREFORE, IT IS VERY IMPORTANT TO CHECK THE WEARING STATUS OF THE MASK. THE EUROPEAN AND AMERICAN COUNTRIES HAVE LISTED THE APPLICATION TEST OF THE MASK AS A STRONG INSPECTION ITEM.

FOR EXAMPLE, THE N95 MASK IS ONE OF 9 TYPES OF PARTICULATE PROTECTIVE MASKS CERTIFIED BY NIOSH (NATIONAL INSTITUTE OF OCCUPATIONAL SAFETY AND HEALTH). "N" INDICATES OIL RESISTANCE."95" INDICATES THAT THE PARTICLE CONCENTRATION IN THE MASK IS MORE THAN 95% LOWER THAN THAT OF THE PARTICLES OUTSIDE THE MASK WHEN EXPOSED TO THE SPECIFIED NUMBER OF SPECIAL TEST PARTICLES. N95 IS NOT A SPECIFIC PRODUCT NAME, AS LONG AS IT MEETS THE N95 STANDARD AND PASSES THE NIOSH REVIEW, IT CAN BE CALLED "N95 MASK".

N95 TYPE MASKS, IN ADDITION TO THE FILTERING EFFICIENCY OF THE MASKS, THE CLOSENESS OF THE MASKS TO THE FACE IS ONE OF THE IMPORTANT FACTORS THAT DETERMINE THE EFFECTIVENESS OF THE USE OF THE MASKS. THE SUITABILITY OF DIFFERENT TYPES OF MASKS FOR THE HUMAN FACE VARIES GREATLY.

THEREFORE, BEFORE USING A MASK, THE SUITABILITY OF THE MASK SHOULD BE CHECKED FIRST. DURING THETIGHTNESS TEST OF THE WEARER'S FACE, ENSURE THAT AIR CAN PASS IN AND OUT THROUGH THE MASK WHEN IT IS CLOSE TO THE EDGE OF THE FACE. THE MASK TIGHTNESS TESTER CAN QUICKLY COMPLETE THE TIGHTNESS TEST OF RESPIRATORS SUCH AS MASKS TO ENSURE THAT IT PROVIDES GOOD PROTECTION PERFORMANCE. IT CONFORMS TO THE CHINESE RESPIRATOR STANDARD GB2626-2019 STANDARD, OSHA / CSA STANDARD AND CHINA GENERAL ADMINISTRATION OF QUALITY SUPERVISION, INSPECTION AND QUARANTINE "GB 19083-2010 TECHNICAL REQUIREMENTS FOR MEDICAL PROTECTIVE MASKS" JOINTLY ISSUED BY THE CHINA NATIONAL STANDARDIZATION ADMINISTRATION COMMITTEE.

ADHESION (SUITABILITY TEST): THE MASK DESIGN SHOULD PROVIDE GOOD ADHESION. THE OVERALL FIT FACTOR OF THE MASK SHOULD NOT BE LESS THAN 100. THIS TEST THE REQUIREMENTS WERE FORMALLY IMPLEMENTED ON AUGUST 1, 2011.

MASK TIGHTNESS TESTER USES CNC TECHNOLOGY, SUITABLE FOR 100 / 99 / P3 / HEPASERIES MASKS DISPOSABLE FILTER MASK TIGHTNESS TEST (INCLUDING DISPOSABLE DUST MASKS SUCH ASN95 / N90 / KN95), GAS MASKS / BREATHING MASKS, ADHESIVENESS TEST OF HALF-MASK AND FULL FACE MASK, INDEPENDENT OR COMPUTER CONTROL, FIVE LANGUAGES SWITCH DISPLAY, EQUIPPED WITH MULTIPLE COMMUNICATION INTERFACES (USB, ETHERNET), WIFI CAN ALSO BE ENABLED, ONE COMPUTERCAN CONTROL FOUR INSTRUMENTS AT THE SAME TIME.

PARAMETER:

CONCENTRATION RANGE: 0 ~ 100,000 / CM3

GRAIN DIAMETER: 0.02 ~ 1.0^M

FLOW: SAMPLING FLOW: 100CM3 / MIN

TOTAL FLOW: 700CM3 / MIN

CLOSENESS COEFFICIENT TEST: DIRECT TEST (COUT/ CIN)

LIQUOR: 99.5% + ISOPROPANOL (ANALYTICAL GRADE)

DISPLAY: 7INCH TRUE COLOR TOUCH SCREEN

COMMUNICATION INTERFACE: USB X 3 (HOST X 2,DEVICE X 1) ETHERNET INTERFACE X1

CONNECTION PORT: ENVIRONMENT PORT, SAMPLING PORT

WIFI: EQUIPPED

LANGUAGES: ENGLISH, FRENCH, SPANISH, PORTUGUESE, CHINESE

FLOW CONTROL: SENSOR CONTROL

PC CONTROLLABLE OPERATION: ONE COMPUTER CAN CONTROL 4 INSTRUMENTS AT THE SAME TIME

DATA OUTPUT FORMAT: MICROSOFT EXCEL

WORKING TEMPERATURE: 15 ~ 35 °C

POWER SOURCE: AC 110 —240V 50 / 60HZ

APPEARANCE SIZE: 208 X 117 X 262MM

WEIGHT: 2.1KG

ACCESSORIES: ALCOHOL REAGENT BOTTLE, PROTECTIVE CAP, REAGENT STICK, ZERO-COUNT FILTER, STRAINER, SAMPLING TUBE, INSTRUCTION MANUAL, AC ADAPTER, TOUCH SCREEN PEN, OPTIONAL COMPUTER.

OPTIONAL: TEST KIT FOR TIGHTNESS COEFFICIENT

IN ORDER TO PREVENT INFECTION AT THE MEDICAL SITE AND DURING LABOR WORK, WORKERS MUST BE PROTECTED FROM INHALABLE HAZARDOUS SUBSTANCES IN THE WORKPLACE, AND RESPIRATORS SUCH AS MASKS MUST BE WORN DURING WORK.

SELECT A RESPIRATOR, SUCH AS A MASK, BASED ON YOUR FACIAL FEATURES, AND EVALUATE THE TIGHTNESS BETWEEN THE RESPIRATOR, SUCH AS A MASK AND THE FACE, TO CHECK WHETHER THERE ARE GAPS OR LEAKS THAT PUT WORKERS AT RISK. THE MASK TIGHTNESS TESTER CAN QUICKLY COMPLETE THE TIGHTNESS TEST OF RESPIRATORS SUCH AS MASKS TO ENSURE THAT IT PROVIDES GOOD PROTECTIVE PERFORMANCE. SECURITY EXPERTS WILL ALSO DEVELOP PROTECTION SCHEMES AND STANDARD REGULATIONS BASED ON THE RESULTS OF THE TIGHTNESS TEST. WIDELY USED IN HOSPITALS, MANUFACTURING PLANTS, PRODUCTION SITES, FIREFIGHTING WORKPLACES AND OTHER OFFICIAL TESTING AGENCIES.

MASK TIGHTNESS TESTER FEATURES:

• QUANTITATIVE TIGHTNESS TEST FOR RESPIRATORS SUCH AS MASKS (QNFT)

• APPLICABLE TO 100/99 / P3 / HEPA SERIES MASK DISPOSABLE FILTER MASK TIGHTNESS TEST (INCLUDING N95 / N90 / KN95 AND OTHER DISPOSABLE DUST MASKS)

• ADHESION TEST OF HALF MASK AND FULL FACE MASK

• GAS MASK TIGHTNESS TEST

• PAPR MASK TIGHTNESS TEST

• SCBA RESPIRATOR MASK TIGHTNESS TEST

• 7INCH TRUE COLOR TOUCH SCREEN

• INDEPENDENT OR COMPUTER CONTROLLED

• USING CNC TECHNOLOGY

• ENGLISH, FRENCH, SPANISH, PORTUGUESE, CHINESE LANGUAGE SWITCHING DISPLAY

• COMPLIES WITH US OSHA STANDARDS, CANADIAN STANDARDS ASSOCIATION (CSA) GUIDELINES, INCLUDING N95

• EQUIPPED WITH A VARIETY OF COMMUNICATION INTERFACES (USB, ETHERNET), AND CAN ALSO ENABLE WIFI

• ONE COMPUTER CAN CONTROL FOUR INSTRUMENTS AT THE SAME TIME

QUANTITY: 1

Learn More

R-9572 COMPLETE DANGER FLAT WAFER OVEN LINE, YEAR AROUND 1975-1980 (WITH HEBENSTREIT CREAM LINE)

Compare

REFERENCE NUMBER: R-9572

COMPLETE DANGER FLAT WAFER OVEN LINE, YEAR AROUND 1975-1980 (WITH HEBENSTREIT CREAM LINE)

COMPLETE FLAT WAFER LINE

CONSITING OF:

DANGER WM 52 FLAT WAFER OVEN

DANGER WM 36 FLAT WAFER OVEN

HEBENSTREIT WZ-EM WAFER SPREAD CREAM LINE

POSSIBLY WITH SUBSEQUENT COOLING CHANNEL

AND SIG SB HORICONTAL FLOW WRAPPER INCL

WAFER CUTTER TABLE

MACHINE IS OFFERED IN ‘AS IS’ CONDITION, WITHOUT WARRANTY

QUANTITY: 1

Learn More

P-4421 LAUNDRY SOAP PRODUCTION LINECAPACITY 1000 to 1500 KILOGRAMS PER HOUR

Compare

REFERENCE NUMBER: P-4421

VOLUME: 10m3

SIZE:φ2800 x 3000, 20 m3

POWER: 5.5 KILOWATTS PER SET

Learn More

P-5091 REBUILT PROBAT ROASTER 90 OR 120 KILOS

Compare

P-5091 REBUILT PROBAT ROASTER 90 OR 120 KILOS

AUTOMATIC PROBAT ROASTER - 90 KILO
COMPLETE WITH :
SUCTION GROUP TO FEED GREEN COFFEE TO THE ROASTER
HOPPER FOR COFFEE WITH AUTOMATIC DOWNLOAD
ROASTING DRUM WITH SCRAPERS TO MOVE GREEN COFFEE
AUTOMATIC SHUTTER WITH SAFETY POSITION AND LIMIT SWITCH
COOLING BASIN WITH ACCIDENT PREVENTIONS, SCRAPERS AND FUN FOR COOLING AIR
HOT CIRCUIT WITH GAS BURNER COMPLETE WITH FUN WITH PARTIAL RECYCLE OF HOT AIR AND UNLOADING TANK TO RECOLLECT SOLID PARTS
3 FLAME BURNER CONTROLLED BY PROBES SET BY THE CONTROL PANEL
CONTROL PANEL WITH TOUCH SCREEN FIRE FIGHTING DEVICE WITH OPENING ELECTRO-VALVES, VOLUMETRIC COUNTER.
THE DEVICE IS INSTALLED BOTH ON THE DRUM AND ON THE COOLING BASIN
VALUE WITH REBUILT:
NEW DESTONER
OVERHAULED AFTERBURNER
REBUILT 90 KILO CE STANDARDS WITH 12 MONTH WARRANTY

AUTOMATIC PROBAT ROASTER - 120 KILO
COMPLETE WITH :
LOADING HOPPER FOR GREEN COFFEE TO GO TO ROASTER
PNEUMATIC PLANT
INSULATION ON ALL PARTS OF MACHINE
AUTOMATIC SHUTTER WITH SAFETY POSITION AND LIMIT SWITCH
COOLING BASIN WITH ACCIDENT PREVENTIONS, SCRAPERS
HOT CIRCUIT WITH GAS BURNER COMPLETE WITH FAN WITH PARTIAL RECYCLE OF HOT AIR AND UNLOADING TANK TO RECOLLECT SOLID PARTS
3 FLAME BURNER CONTROLLED BY PROBES SET BY THE CONTROL PANEL
CONTROL PANEL WITH TOUCH SCREEN FIRE FIGHTING DEVICE WITH OPENING ELECTRO-VALVES, VOLUMETRIC COUNTER.
THE DEVICE IS INSTALLED BOTH ON THE DRUM AND ON THE COOLING BASIN
VALUE WITH REBUILT:
NEW DESTONER WITH SUCTION CUP AND DUMPER
NEW INSULATED BOX FOR AFTERBURNER WITH ADJUSTABLE THERMO REGULATORS
REBUILT 120 KILO CE STANDARDS WITH 12 MONTH WARRANTY

QUANTITY: 1

Learn More

M-4010 10 MW BIOGAS TO STEAM CONGENERATION PLANT – 10 MEGAWATTS

Compare

REFERENCE NUMBER: M-4010

10 MW BIOGAS TO STEAM CONGENERATION PLANT – 10 MEGAWATTS

10 MW BIOGAS-FIRED COGENERATION PLANT

LATE MODEL, EXCELLENT CONDITION

INCLUDES BOILER, STEAM TURBINE, GENERATOR AND CONDENSER

CAPABLE OF CONVERTING METHANE, LANDFILL GAS, BIOGAS OR NATURAL GAS INTO ELECTRICITY

COMPLETE WITH ALL SUPPORT EQUIPMENT, INCLUDING PUMPS, WATER SYSTEMS, BLOWERS, ETC.

COMPLETE CONTROL ROOM AVAILABLE WITH OPERATIONAL CONTROL PANELS FEATURING CONTROLS BY PANALARM, FOXBORO, BENTLY NEVADA AND BASLER

STARTERS AND SWITCH GEAR BY SIEMENS

BOILER:

125,000 LBS/HR @ 725 PSI DELTAK FIRE TUBE STEAM BOILER

16,189 SQ. FT. HEATING SURFACE

STEAM TURBINE:

101,000 LBS/HR @ 600 PSI TERRY MULTI-STAGE CONDENSING STEAM TURBINE

INCLUDES WOODWARD GOVERNOR AND TACKE GEAR REDUCER

GENERATOR:

10,200 KW IDEAL ELECTRIC

1,800 RPM, 60 HZ

INCLUDES BRUSHLESS EXCITER

CONDENSER:

7,809 SQ. FT. GRAHAM SHELL AND TUBE HEAT EXCHANGER

CS AND ADMIRALTY BRASS CONSTRUCTION

88,100 LBS/HR EXHAUST

86 MM BTU/HR DUTY

Learn More

M-5546 FABRIC DYEING MACHINERY

Compare

REFERENCE NUMBER: M-5546 (440YNTBHH3) L FABRIC DYEING MACHINERY (1) X STAND FOR FABRIC ROLLS 3X 17 MT (6) X DYEING CANS (1) X LINCOLN ELECTRIC WELDING EQUIPMENT (16) X FIRE EXTINGUISHING EQUIPMENT 10, 20 Y 30 LIBRAS (1) X ALARM (1) X HYDRANT WITH 2 HOSES (1) X WHEELED 10 STAGES STRUCTURE (3) X 5 MT3 STORAGE TANKS AND PENLIKE PUMP TO EXTRACT FROM DRILLED HOLE (1) X BOILER J. C. T. 100 BHP CONVERTED TO GAS AND ACPM (1) X SCALE IDEMA (1) X ELECTRONIC SCALE MIERTIER (1) X CENTRIFUGE FOR 100 KG (1) X COMPRESSOR SFM AT 7 HP (1) X COMPRESSOR AT 3 HP (1) X M. C. S. SOFT FLOW 400 KG MODEL 1993 (2) X BATCH DYEING FOR 80 Y 100 KG (2) X FABRIC INSPECTION DEVICE INSTALLATION AND MONTAGE OF GAS AND ELECTRICITY SYSTEMS (1) X BRUCKNER STENTER WITH WEFT STRAIGHTENING SYSTEM MAHLO AND FOULARD MAX GOLLER OF 3 CHAMBERS WITH 6 BURNERS OF 600,000 BTU EACH (1) X NON STOP MACHINE FOR FABRIC MODEL 2008 SERIES 0148-5 ALL MACHINES ARE RUNNING AT THE MOMENT TOTAL QUANTITY AVAILABLE: 43 Learn More

TT-7585 SIEMENS SST-300 STEAM TURBINE - NEW, YEAR 2021, 50 Hz

Compare

TT-7585 SIEMENS SST-300 STEAM TURBINE - NEW, YEAR 2021, 50 Hz 1. BRAND NEW STEAM TURBINE SIEMENS SST-300 - IN FACTORY 2. PACKING FROM THE YEAR 2021 3. THIS TURBINE HAS NEVER BEEN INSTALLED AND AVAILABLE 4. WITH ALL ITS EQUIPMENT AND ACCESSORIES 5. STORED IN WAREHOUSE SECURELY, IN GOOD ENVIRONMENT. Learn More

TT-4763 JENBACHER J312 COMPLETE BIOGAS UNIT, 635 KW, YEAR 2023, 50 Hz

Compare

TT-4763 JENBACHER J312 COMPLETE BIOGAS UNIT, 635 KW, YEAR 2023, 50 Hz QUANTITY: 1 Learn More

TT-2639 COMPLETE LINE FOR PROCESSING NON-WOVEN FABRIC, ROLLS WIDTH 30mm TO MAX 2200mm

Compare

TT-2639 COMPLETE LINE FOR PROCESSING NON-WOVEN FABRIC, ROLLS WIDTH 30mm TO MAX 2200mm THERMOBOND LINE: POLYPROPYLENE POLYESTER POLYAMID, AND MIXTURES WITH VISCOSE OR COTTON TILL CA 30%. COVERSTOK, HYGIENE NONWOVEN FOR PADS, SLIPS, DRAPES GOWNS, FILTERS, WET WIPES, AUTOMOTIVE INDUSTRY, UPHOLSTERY TRUTZSCHLER, SPINNBAU, RAMISCH KLEINEWEFERS, EDELMAN TERMOBOND LINE INTENDED USE: NONWOVEN PRODUCTION FROM ALL SYNTHETIC FIBRES AND MIXTURES WITH SYNTHETIC FIBRES WHERE FIBRES SOFTENING POINT IS BELOW 250 OC. ROLLS WIDTH: 30mm TO MAX 2200mm ROLLS DIAMETER MAX 1000mm GRAMMAGES: 16 GSM TO MAX 70 GSM (DUPLEX 70 GSM) QUANTITY: 1 Learn More

M-5393 TUFTCO COATING LINE WITH FOAM MACHINE AND SLITTING OPERATION

Compare

REFERENCE NUMBER: M-5393 (2206YBJL1UM) L TUFTCO COATING LINE WITH FOAM MACHINE AND SLITTING OPERATION TUFTO COATING LINE FOR EMBOSSED UNITARY BACKED RUGS USING WASHABLE LATEX FOR EMBOSSED WASHABLE RUGS – SET UP FOR 12’ WIDTH AND INCLUDES THE FOLLOWING: TISI MODEL 38500 BUTT SEAMER WITH TRIMMER ON RAIL ENTRANCE J-BOX VERTICAL KEYON PIN TENTER DIRECT COAT APPLICATOR, ROLL OVER ROLL WITH TRAVERSING SYSTEM DAY TANK TO FEED LATEX TO FROTH MACHINE EASE TYPE FROTH MACHINE PRE-STEAMER BANK OF ELECTRIC INFRAREDS TWO BASKET-WEAVE EMBOSSING ROLLERS FOR 12’ WIDTHS FOUR MODULE NATURAL GAS HEATED TUFTCO CURING OVEN COOL OUT SECTION SLITTING SECTION WITH EIGHT SLITTING HEADS AND A CAMERA GUIDING SYSTEM 10 LOOP ACCUMULATOR ROLLUP ELECTRICAL CONTROL SYSTEM BY TUFTCO SPEED RANGE: LINE SPEED FOR COATING 50 OUNCE/SQUARE YARD FACE WEIGHT WITH 24 OZ/SQUARE YARD OF EMBOSSIBLE LATEX IS 35FPM, LINE SPEED FOR COATING 30 OZ/SQUARE YARD FACE WEIGHT WITH 20 OZ/SQUARE YARD OF EMBOSSIBLE LATEX IS 45 FPM. TOILET SEAT CONVERS ARE COATED WITH APPROXIMATELY 7 OZ/SQUARE YARD AT 70 FPM. NOTE THE MAXIMUM MECHANICAL SPEED OF THE COATING LINE IS 70 FPM. QUANTITY AVAILABLE: 1 Learn More