Search results for: 'Blade wi'

REFERENCE NUMBER: G-1386 VERTICAL AUTOMATIC FOAMCUTTING MACHINE MODE BF 22 A TECHNICAL DATA: WORKING TABLE ON THE RIGHT OF BLADE 2200mm (86.6") WORKING TABLE ON THE LEFT OF BLADE 2200mm (78.7") WORKING CUTTING LENGTH 2400mm WORKING CUTTING HEIGHT 1300mm (51") QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-1384 VERTICAL SEMIAUTOMATIC FOAM CUTTING MACHINE MODEL BF 2200 WORKING TABLE ON THE RIGHT OF BLADE 2200mm (86.6") WORKING TABLE ON THE LEFT OF BLADE 1280mm (50") WORKING CUTTING LENGTH 2400mm (94.4") WORKING CUTTING HEIGHT 1300mm (51") HEADBOARD HEIGHT 1250mm (49") QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-9100 HORIZONTAL FOAM CUTTING MACHINE:(FULLY AUTOMATIC) - FOR 60" HIGH BUNS MODEL PQ-2150- 1524MM FOAM BLOCK SIZE W2150 X L3000mm X 1524mm HIGH POWER 7.94 KW CUTTING SPEED 0~25m/MIN (TABLE TRAVEL SPEED) FLOOR SPACE REQUIREMENT L5800 X W3500 X H2400mm CUT THICKNESS FROM 2 mm AND UP BLADE LENGTH 9580mm, BLADE WIDTH 30mm BLADE THICKNESS IS 0.45mm, BLADE GUIDE OPENING IS FIXED OPENING OF 0.55mm BLADE SPEED: 720 METERS/MINUTE MACHINE WEIGHT 2000 KG VERTICAL BLADE MOVEMENT IS BY BALL SCREWS FULLY AUTOMATED PLC NUMERICAL CONTROLS ALLOWING FOR MULTIPLE THICKNESS CUT IN ONE BUN, SEQUENTIALLY TOUCH SCREEN CONTROLS, INVERTER CONTROLS, SIEMENS PLC , all motors 220 volt , 3 phase , 60HZ WITH A PRESSURE ROLLER FOR FINER CUTS.ELECTRICALLY ACTIVATED VACUUM TABLE (3.6 Kw MOTOR) BLADE SHARPENER AND DUST COLLECTOR (1.1 Kw motor) MOVABLE STABILIZER BAR FOR BLADE GUIDE EXTRA SUPPORT PNEUMATIC BLADE GUIDE TENSIONING QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-4612 HORIZONTAL FOAM CUTTING MACHINE:(FULLY AUTOMATIC) MODEL PQ-2150 FOAM BLOCK SIZE W2150 X L3000mm X 1200mm HIGH POWER 7.94 KW CUTTING SPEED 0~25m/MIN (TABLE TRAVEL SPEED) QUANTITY AVAILABLE: 1 Learn More

T-9197 AUTOMATIC CUTTING MACHINE, CUTTING WIDTH 1mm TO 1580mm, SINGLE SHAFT AUTOMATIC CUTTING MACHINE SINGLE BLADE FOR SINGLE SHAFT SUITABLE FOR VARIOUS ROLL-STOCK MATERIALS SUCH AS PVC, MASKING, BOPP, FOAM TAPE, PROTECTION FILM, ETC. ROLLER WIDTH 1700mm CUTTING WIDTH 1mm TO 1580mm PAPER CORE I.D. 3'' BLADE DIAMETER MAXIMUM 450mm PRECISION +/-0.1mm POWER SOURCE 220 VOLTS 60 Hz 3 PHASE AIR SOURCE 5 KG (FURNISHED BY USER) QUANTITY: 1 Learn More

REFERENCE NUMBER: M-0324 PROFILING MACHINE F2200 FOR FOAM MATTRESSES, MATTRESSES, MAXIMUM WIDTH 2200mm WORKING CUTTING WIDTH 2200mm WORKING CUTTING HEIGHT 20/200mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-0323 PROFILING MACHINE F2000 FOR FOAM MATTRESSES,MATTRESSES,MAXIMUM WIDTH 2200mm WORKING CUTTING WIDTH: 2000mm WORKING CUTTING HEIGHT: 20 / 180mm QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: K-5243 (YOU MUST LOOK AT THE VIDEO, IT’S AMAZING) AUTOMATIC TRIMMING MACHINE FOR FOAM BLOCKS OR FOAM MATTRESSES, FOUR SIDES DESCRIPTION: PU SLABS CUT FROM FOAM BLOCK BY HORIZONTAL CUTTING UNDERGO PERIMETRICAL STRETCHING, (SOMETIMES A FEW CENTIMETERS STRETCHING). IN ORDER TO ACHIEVE SATISFACTORY SIZES (±1MM EACH SIDE) THE REMOVING OF IRREGULAR EDGES IS REQUIRED. THIS MACHINE TRIMS FOAM SLABS AND ALSO COUPLED SLABS. IT CAN BE PLACED AT THE END OF THE MATTRESS GLUING PLANT (MANUAL OR AUTOMATIC) OR BEYOND THE HORIZONTAL CUTTING MACHINE. THE COUPLED FOAM SHEETS ARE NOT ALIGNED AND NEED TO BE TRIMMED. OFTEN THE COUPLED MATTRESSES ARE TRIMMED ONE BY ONE ALONG THE FOUR SIDES WITH A MANUAL VERTICAL CUTTING MACHINE WASTING A LARGE AMOUNT OF TIME. THIS MACHINE AUTOMATICALLY TRIMS THE FOUR SIDES OF FOAM MATTRESSES WITHOUT ANY HANDLING; THAT MEANS AN ACCURATE TRIM AND SHORT PROCESSING TIME. QUANTITY AVAILABLE: 1 Learn More

TT-3204 SINGLE SHAFT AUTO CUTTING MACHINE, WORKING WIDTH 1500mm (BALONEY SLITTER, SUITABLE FOR FILMS) SLITTER REWINDER MAX SLITTING WIDTH: 1600mm (CAN BE CUSTOMIZED FROM 800mm TO 3000mm) MINI SLITTING WIDTH: 10mm UNWINDING DIAMETER: 600mm REWINDING DIAMETER: 300mm AUTOMATIC CUTTING MACHINE FOR FILM ROLLS: AFTER YOU SET THE PARAMETER IT WOULD CUT THE FILM ROLLS TO SMALL WIDTH ROLLS AUTOMATICALY WORKING WIDTH: 1500mm LARGE ROLL MATERIAL DIAMETER MAX: 350mm NO PROBLEM FOR THIS MACHINE TO SLIT YOUR PVC FILM MATERIAL Learn More

YY-2144 MULTIFUNCTION COATING HEAD, 1650mm BY KNIFE OR 1750mm BY ENGRAVED ROLLER DETAILS: 1. COMBINED COATING MACHINE FOR ONE FINISHING AND COATING NOMINAL WIDTH 1800mm. MAXIMUM COATING WIDTH: BY KNIFE 1650mm, BY ENGRAVED ROLLER 1750mm WITH FOLLOWING WORKING MODES POSSIBILITIES: - REVERSE ROLL - SYNCHRO ROLL - REVERSE ROLL "ON AIR" - SYNCHRO ROLL "ON AIR" - BLADE "ON AIR" - BLADE ON COUNTER- ROLLER COMPOSED OF: - WELDED STEEL FRAMEWORK WITH HIGH; - ORSION RIGIDITY; - RUBBERIZED COUNTER-ROLLER DIAMETER 400mm, OIL AND SOLVENTS RESISTANT; - HARDNESS 85 SHORE A, MAX ECCENTRICITY TOLERANCE ±1/100mm; - A/C GEARMOTOR TO DRIVE THE COUNTER ROLLER; - ROLLER CHANGING DEVICE (BRIDGE), ARRANGED TO MOUNT TWO ENGRAVED ROLLERS AND ONE COATING KNIFE; - PNEUMATIC LIFTING OF CHANGING DEVICE (BRIDGE); - MANUAL ROTATION OF THE ROLLER CHANGING DEVICE; - MOTORIZED MICROMETRIC ADJUSTMENT OF COATING THICKNESS, INDEPENDENT RIGHT/LEFT OR IN TANDEM, WITH DIGITAL DISPLAY ON CONTROL PANEL, BY TWO JACKS; - COATING SIDE LIMITERS, MANUALLY ADJUSTABLE EITHER SINGLE OR TANDEM; - FEEDING THROUGH IN FRONT OF THE COATING KNIFE; - A/C GEARMOTOR TO DRIVE THE ENGRAVED ROLLER; - TWO COLOUR DOCTOR BLADES (SYNCHRO / REVERSE) WITH PNEUMATIC OPENING AND CLOSING FOR A SMOOTHER MOVEMENT OF THE BLADE TOWARDS THE ROLLER, WITH OSCILLATING MOVEMENT; - ENTRY IDLER ROLLER, THE UPPER ONE LIFTABLE BY PNEUMATIC PISTONS FOR "ON AIR" COATING; - PIPING FOR THE WASHING OF THE ENGRAVED ROLLER; - TWO SIDE GUTTERS IN STAINLESS-STEEL WITH TEFLON COATING, WITH SOLVENT RESISTANT RUBBER PIPE FOR WASTEWATER OR CHEMICALS COLLECTION AND RECIRCULATION; - WASTEWATER RECOVERY BASIN, WITH DRAIN, UNDER THE COUNTER-ROLLER; - MANUAL SEAM JUMPER; - VARIABLE SPEED FROM 2,5 TO 50 M/MIN FOR THE COUNTER-ROLLER AND FROM 2,5 TO 99 M/MIN FOR THE ENGRAVED ROLLER; - PIVOTING CONTROL PANEL WITH DIGITAL SCREEN, MOUNTED ON THE MACHINE FRAME, TO CONTROL AND SET THE MACHINE FUNCTIONS; - MAIN ELECTRICAL PANEL EQUIPPED WITH PLC AND INVERTERS, PROTECTION IP54, MOUNTED INSIDE THE LEFT HAND MACHINE SHOULDER; - SET OF MACHINE ACCESSORIES AND INSTRUCTION & MAINTENANCE MANUAL. Learn More