Search results for: 'hand pump'

T-1652 SGT 400 GAS TURBINE, 50Hz, YEAR 2017, 11 KV, 12.9 MW SGT 400 GAS TURBINE TYPE: STANDARD BRAND: SIEMENS CATEGORY: ENGINES/GENERATORS/MOTORS/TRANSMISSIONS SUBCATEGORY: TURBINE IN STOCK: YES CONDITION: EXCELLENT TYPE: UNUSED SGT-400 GAS TURBINE GENERATOR SET, WITH INTEGRAL LOCAL EQUIPMENT ROOM: UNIT(S) TO BE SUPPLIED ARE UNUSED, WITH ZERO RUNNING HOURS, NEVER INSTALLED THESE UNITS HAVE BEEN STORED INDOORS SINCE MANUFACTURE. QUANTITY: 2 Learn More

J-3004 FIBRILLATED RAFFIA TAPE EXTRUSION LINE – NEW, 120mm PP FIBRILLATED YARN EXTRUDER LINE MODEL: NOVASTAR-120 EXTRUSION LINE FOR PRODUCTION OF PP FIBRILLATED YARN RAW MATERIAL: PP GRANULE FINISHED PRODUCTS: NON-TWISTED TAPE YARN, FIBRILLATED YARN FOR TWINE RANGE OF PRODUCT: 10,000 TO 30,000 DENIER 10000 DENIER APPROXIMATELY 17 TO 19 YARN 16000 DENIER APPROXIMATELY 11 TO 12 YARN 22000 DENIER APPROXIMATELY 8 TO 9 YARN 28000 DENIER APPROXIMATELY 6 TO 7 YARN 32000 DENIER APPROXIMATELY 5 TO 6 YARN EXTRUSION THROUGHPUT: 300 KG PER HOUR EXTRUSION CAPACITY: 180 TO 250 KG PER HOUR (PRODUCT CAPACITY DEPEND ON FILAMENT SIZE) EXTRUDER SCREW DIAMETER: Ø 120mm T-DIE WIDTH: 1300mm TAKE-OFF ROLLER WIDTH: 1200mm TAKE-OFF LINE SPEED: 160 METERS PER MINUTE (MAXIMUM) OPERATION SIDE: RIGHT TO LEFT, OR LEFT TO RIGHT Learn More

TT-2350 GARDNER DENVER OIL DRILLING RIG, 1000HP ONE SINGLE MACHINE DRAWWORKS GARDNER DENVER 800M SINGLE DRUM WITH 1 3/8” GROOVING RATED FOR 1000 INPUT HORSEPOWER, WITH TWO ENGINE COMPOUND. POWERED BY (2) CAR C-18 ACERT, EPA TEIR 3 ENGINES WITH 195-100 OWI TORQUE CONVERTER. HYDROMATIC BRAKE. QUANTITY: 1 Learn More

YY-2324 ECONOMELT 20-2/4 HOT MELT TANK, 20 LB TANK CAPACITY SIMPLE, LOW COST INDUSTRIAL HOT MELT TANK WITH 20 LB CAPACITY, HIGH FLOW PISTON PUMP, ABILITY TO OPERATE WITH FOUR HOSES AND HANDGUNS OR AUTOMATIC GUNS. QUANTITY: 1 Learn More

YY-2323 ECONOMELT 10 INDUSTRIAL HOT MELT TANK, 10 LB TANK CAPACITY SIMPLE, LOW COST INDUSTRIAL HOT MELT TANK WITH 10 LB CAPACITY TANK, HIGH FLOW PISTON PUMP ABILITY TO OPERATE ONE HOSE AND HANDGUN OR ONE HOSE AND AUTOMATIC GUN. QUANTITY: 1 Learn More

YY-3279 SGT – 600 GAS TURBINE GENERATOR SET, WITH INTEGRAL LOCAL EQUIPMENT ROOM UNIT(S) TO BE SUPPLIED ARE UNUSED, WITH ZERO RUNNING HOURS, NEVER INSTALLED. Learn More

TT-5555 EREMA INTAREMA 1714 TVEPLUS COMPLETE RECYCLING PLANT, YEAR 2017, 50Hz COMPLETE RECYCLING EREMA INTAREMA 1714 TVEPLUS YEAR 2017 AND WAS STARTED UP FOR THE FIRST TIME IN 2018 TYPE SELLING BRAND EREMA MODEL INTAREMA 1714 SINCE YEAR 2017 QUANTITY: 1 Learn More

TT-6022 CATERPILLAR D8T WASTE HANDLER, YEAR 2014 CATERPILLAR D8T WASTE HANDLER REBUILT / RECONDITIONED YEAR 2014 MACHINE FRAME HOURS: 10,375 APPROX 400 HOURS SINCE REBUILD ALL NEEDED SERVICING & REPAIRS HAVE BEEN COMPLETED OPTIONAL MS RIPPER IS AVAILABLE Learn More

YY-2358 DM5 HOT MELT PAIL UNLOADER THE DM5 IS A STATIONARY PAIL MELTER (UNLOADER) THAT COMBINES A HEATED PLATEN, PUMP AND ALL CONTROLS NEEDED TO MELT AND DISPENSE HOT MELT ADHESIVES, SEALANTS, PURS OR COATINGS FROM A STANDARD 5-GALLON STEEL PAIL. THE CONTROLLER PROVIDES ACCURATE, PROPORTIONATE TEMPERATURE CONTROL FOR THE PLATEN, HOSES AND APPLICATORS. A “STANDBY” TEMPERATURE MAY BE PROGRAMMED SO THAT THE TEMPERATURE ZONES CAN BE INDEPENDENTLY MAINTAINED AT A LOWER TEMPERATURE WHEN THE UNIT IS NOT IN ACTIVE USE, ENABLING RAPID RETURN TO NORMAL OPERATION. A VARIETY OF GEAR PUMPS ARE AVAILABLE. THE MELTER CAN BE UTILIZED AS A BULK-TRANSFER UNIT OR AS A STAND-ALONE UNIT. IT CAN SUPPLY ONE OR TWO HAND-HELD APPLICATORS OR OTHER APPLICATORS. QUANTITY: 1 Learn More

TT-8223 VERSA-DRILL V100NG DRILLING RIG, YEAR 2009 1. VERSA-DRILL V100NG DRILLING RIG 2. YEAR 2009 3. BRAND: VERSA-DRILL 4. MODEL: V100NG 5. YEAR: 2009 6. CONDITION: USED QUANTITY: 1 Learn More