TT-1112 EXTRUSION LAMINATOR, UP TO 2200mm, ONE SIDED
LAMINATING MACHINE (480 VOLTS, 3-PHASE, 60Hz)
MAIN PROCESS AND PARAMETERS
TECHNOLOGICAL PROCESS
MAIN UNWINDING, RECTIFYING, EXTRUDING, COMPOUND CUTTING AND REWINDING.
MAIN TECHNICAL PARAMETERS
1. RAW MATERIAL: SUITABLE FOR COATING RESIN LDPE, PP AND OTHER COATING BASE MATERIAL.
2. AUXILIARY BASE MATERIAL: PAPER, NON-WOVEN FABRIC, ALUMINUM FILM, WOVEN CLOTH AND OTHER APPLICABLE MATERIALS
MECHANICAL SPEED: 60 TO 150 METERS/MINUTE (ACTUAL SPEED DEPENDS ON FILM MATERIAL, FILM WIDTH AND THICKNESS, ETC.)
EFFECTIVE WIDTH OF LAMINATING: 1200 TO 2000mm
LAMINATING THICKNESS: 0.008 TO 0.080mm
LAMINATING THICKNESS ERROR ±5%
TENSION SETTING RANGE: 20 TO 200 KG/FULL WIDTH
CONSTANT TENSION MAXIMUM EXTRUSION: 200 KG/HOUR
INNER DIAMETER OF BASE MATERIAL ROLL CORE: 76mm
MACHINE POWER: 100 KW
ACTUAL OPERATING POWER IS 50 KW TO 60 KW
CONTROL TYPE OF COMPOUND SPEED AND LAMINATING THICKNESS: PLC COMPUTER, FULLY AUTOMATIC ELECTRICAL CONTROL
LAMINATING WITH EMBOSSING: SINGLE-LAYER
Learn More
TT-7562 CATERPILLAR 816B, YEAR 1989, RECONDITIONED, 17,330 HOURS
1. MACHINE HOURS: 17,330
2. CATERPILLAR DEALER REBUILT THE COMPLETE DRIVE TRAIN AT 15,384 HOURS
3. ENGINE, TORQUE, TRANSMISSION, TRANSFER CASE, BOTH DIFFERENTIALS,
4. ALL FINAL DRIVES, REAR AXLE OSCILLATION & HYDRAULIC PUMPS ETC.
5. REBUILD / REPAIR RECORDS ARE AVAILABLE.
6. ALL NEEDED REPAIRS & SERVICING HAS BEEN COMPLETED BY MARCEL EQUIPMENT SINCE ARRIVING IN OUR YARD.
QUANTITY: 1
Learn More
TT-7861 TAURUS 65 GAS TURBINE GENERATOR SET, YEAR 2022, WITH ONLY 300 HOURS
1. WITH ONLY 300 HOURS
2. TAURUS 65
3. 300 HOURS
4. YEAR 2022
5. THE DISMANTLED AND READY FOR DELIVERY
6. TAURUS 65 GAS TURBINE
7. INDUSTRIAL, SINGLE-SHAFT
8. 13 STAGE COMPRESSOR
9. VARIABLE INLET GUIDE VANES AND STATORS
QUANTITY: 1
Learn More
TT-7737 KOMORI LITHRONE LS 40-5 HC, YEAR 2003
1. BRAND: KOMORI
2. MODEL: LITHRONE LS 40-5 HC
3. YEAR OF CONSTRUCTION: 2003
4. NUMBER OF IMPRESSIONS: 130 MIO.
QUANTITY: 1
Learn More
TT-7239 WINDMOLLER+HOLSCHER FLEXOPRESS-GEARLESS, YEAR 2002
1. MODEL: NOVOFLEX - 8 COLORS CI/ZENTRALZYLINDER
2. YEAR 2002 / UNTIL 2020 EXTENDED/PARTL. OVERHAULD
3. WEB WIDTH MAX. 1320mm
4. WEB WIDTH MIN 520mm
QUANTITY: 1 Learn More
V-2197 VERTICAL FAST WIRE CONTOUR CUTTER – WITH NESTING
For Max. Block Size: Length 2440 mm (96 in), Width 1220 mm (48 in), Height 600 mm (23.6 in)
Machine for cutting pipe insulation
A programmed-control cutting machine which runs on AutoCAD, controlled by computer.
Main Features of Contour Cutter:
1. Integrated design & cutting program. Simply design and cut;
2. Big cost savings by automatically arranging the product;
3. Support numeric instrument;
4. Higher material utilization resulting from computer aided nesting of shapes;
5. Cut speed can be set to achieve the best-cut speed for different foam material;
6. Can pre-cut on the computer to check cutting course;
7. With Nesting System
Learn More
TT-1112 EXTRUSION LAMINATOR, UP TO 2200mm, ONE SIDEDTT-1112 EXTRUSION LAMINATOR, UP TO 2200mm, ONE SIDED LAMINATING MACHINE (480 VOLTS, 3-PHASE, 60Hz) MAIN PROCESS AND PARAMETERS TECHNOLOGICAL PROCESS MAIN UNWINDING, RECTIFYING, EXTRUDING, COMPOUND CUTTING AND REWINDING. MAIN TECHNICAL PARAMETERS 1. RAW MATERIAL: SUITABLE FOR COATING RESIN LDPE, PP AND OTHER COATING BASE MATERIAL. 2. AUXILIARY BASE MATERIAL: PAPER, NON-WOVEN FABRIC, ALUMINUM FILM, WOVEN CLOTH AND OTHER APPLICABLE MATERIALS MECHANICAL SPEED: 60 TO 150 METERS/MINUTE (ACTUAL SPEED DEPENDS ON FILM MATERIAL, FILM WIDTH AND THICKNESS, ETC.) EFFECTIVE WIDTH OF LAMINATING: 1200 TO 2000mm LAMINATING THICKNESS: 0.008 TO 0.080mm LAMINATING THICKNESS ERROR ±5% TENSION SETTING RANGE: 20 TO 200 KG/FULL WIDTH CONSTANT TENSION MAXIMUM EXTRUSION: 200 KG/HOUR INNER DIAMETER OF BASE MATERIAL ROLL CORE: 76mm MACHINE POWER: 100 KW ACTUAL OPERATING POWER IS 50 KW TO 60 KW CONTROL TYPE OF COMPOUND SPEED AND LAMINATING THICKNESS: PLC COMPUTER, FULLY AUTOMATIC ELECTRICAL CONTROL LAMINATING WITH EMBOSSING: SINGLE-LAYER Learn More
TT-7562 CATERPILLAR 816B, YEAR 1989, RECONDITIONED, 17,330 HOURSTT-7562 CATERPILLAR 816B, YEAR 1989, RECONDITIONED, 17,330 HOURS 1. MACHINE HOURS: 17,330 2. CATERPILLAR DEALER REBUILT THE COMPLETE DRIVE TRAIN AT 15,384 HOURS 3. ENGINE, TORQUE, TRANSMISSION, TRANSFER CASE, BOTH DIFFERENTIALS, 4. ALL FINAL DRIVES, REAR AXLE OSCILLATION & HYDRAULIC PUMPS ETC. 5. REBUILD / REPAIR RECORDS ARE AVAILABLE. 6. ALL NEEDED REPAIRS & SERVICING HAS BEEN COMPLETED BY MARCEL EQUIPMENT SINCE ARRIVING IN OUR YARD. QUANTITY: 1 Learn More
T-9601 FABRIC GSM CUTTER MACHINET-9601 FABRIC GSM CUTTER MACHINE KEY SPECIFICATION: CONTROL MODE: MANUAL CUTTING AREA: 1000mm2 CUTTING DIAMETER: Φ112.8mm CUTTING THICKNESS: 5mm DIMENSION: Φ 150 × 115 WEIGHT: 1KG STANDARDS ACCESSORIES: 4PCS - SCHRODER BLADES (MADE IN GERMANY) 1PC - CUTTING MAT Learn More
K-2812 BAUMER OFS 202 FOAM CUTTING MACHINE-REFURBISHED IN 2011REFERENCE NUMBER: K-2812 BAUMER OFS 202 FOAM CUTTING MACHINE-REFURBISHED IN 2011 QUANTITY AVAILABLE: 1 Learn More
TT-7861 TAURUS 65 GAS TURBINE GENERATOR SET, YEAR 2022, WITH ONLY 300 HOURSTT-7861 TAURUS 65 GAS TURBINE GENERATOR SET, YEAR 2022, WITH ONLY 300 HOURS 1. WITH ONLY 300 HOURS 2. TAURUS 65 3. 300 HOURS 4. YEAR 2022 5. THE DISMANTLED AND READY FOR DELIVERY 6. TAURUS 65 GAS TURBINE 7. INDUSTRIAL, SINGLE-SHAFT 8. 13 STAGE COMPRESSOR 9. VARIABLE INLET GUIDE VANES AND STATORS QUANTITY: 1 Learn More
TT-7737 KOMORI LITHRONE LS 40-5 HC, YEAR 2003TT-7737 KOMORI LITHRONE LS 40-5 HC, YEAR 2003 1. BRAND: KOMORI 2. MODEL: LITHRONE LS 40-5 HC 3. YEAR OF CONSTRUCTION: 2003 4. NUMBER OF IMPRESSIONS: 130 MIO. QUANTITY: 1 Learn More
TT-7239 WINDMOLLER+HOLSCHER FLEXOPRESS-GEARLESS, YEAR 2002TT-7239 WINDMOLLER+HOLSCHER FLEXOPRESS-GEARLESS, YEAR 2002 1. MODEL: NOVOFLEX - 8 COLORS CI/ZENTRALZYLINDER 2. YEAR 2002 / UNTIL 2020 EXTENDED/PARTL. OVERHAULD 3. WEB WIDTH MAX. 1320mm 4. WEB WIDTH MIN 520mm QUANTITY: 1 Learn More
YY-3485 PROCESSING AND PACKAGING LINE FOR COFFEE PODS (ESE Ø44mm)YY-3485 PROCESSING AND PACKAGING LINE FOR COFFEE PODS (ESE Ø44mm) Learn More
TT-6398 PERINI 716B BATHROOM TISSUE LINE, 106”, YEAR 2020TT-6398 PERINI 716B BATHROOM TISSUE LINE, 106”, YEAR 2020 1. PERINI 716B BATHROOM TISSUE LINE 2. 106” 3. WEB WIDTH: 108.3” QUANTITY: 1 Learn More
V-2197 VERTICAL FAST WIRE CONTOUR CUTTER – WITH NESTINGV-2197 VERTICAL FAST WIRE CONTOUR CUTTER – WITH NESTING For Max. Block Size: Length 2440 mm (96 in), Width 1220 mm (48 in), Height 600 mm (23.6 in) Machine for cutting pipe insulation A programmed-control cutting machine which runs on AutoCAD, controlled by computer. Main Features of Contour Cutter: 1. Integrated design & cutting program. Simply design and cut; 2. Big cost savings by automatically arranging the product; 3. Support numeric instrument; 4. Higher material utilization resulting from computer aided nesting of shapes; 5. Cut speed can be set to achieve the best-cut speed for different foam material; 6. Can pre-cut on the computer to check cutting course; 7. With Nesting System Learn More