Search results for: 'cas'

TT-1594 DISTILLATION SYSTEMS & COLUMNS, CAPACITY 950mm TO 1000mm DIAMETER ITEM 001 PACKED DISTILLATION COLUMN SYSTEM ITEM 002 PACKED DISTILLATION COLUMN SYSTEM Learn More

J-4630 DOUBLE SHAFT SHREDDER, CHAMBER DIMENSIONS 1500mm LENGTH x 950mm WIDTH DOUBLE SHAFT SHREDDER KNIVES: 22 PIECES, SIZE Ø500mm x 70mm, MATERIAL 55SRCI SPACERS: 22 PIECES, SIZE Ø290mm x 70mm, MATERIAL 45C STEEL SHAFTS: 2 PIECES, SIZE Ø240mm x 2400mm, MATERIAL 42CRMO CHAMBER DIMENSIONS: 1500mm LENGTH x 950mm WIDTH SPEED: 10 RPM (SPEED IS FIXED AND CAN NOT BE ADJUSTED) DIAMETER OF BARE ROLL (WITHOUT TEETH): 420mm FROM INNER TO THE TEETH BOTTOM DIAMETER, TEETH DEPTH IS 40mm (TOTAL OUTER DIAMETER OF BLADE IS 500mm) SHAFT DIAMETER: 240mm MOTOR POWER: 37 KW (2 PIECES) REDUCER: K SERIES (2 PIECES) VOLTAGE: 480 VOLTS WEIGHT: 12,000 KGS QUANTITY: 1 Learn More

TT-1389 LAB RING SPINNING FRAME KEY SPECIFICATION: CONTROL MODE: TOUCH SCREEN & PLC NUMBER OF SPINDLES: 6 APPLICABLE FIBER LENGTH: 22 TO 50mm DRAFT RANGE: 10 TO 50 DRAFT CONTROL: AUTOMATIC ROLLER DIAMETER: FRONT ROLLER: Φ25mm, MIDDLE ROLLER: Φ25mm BACK ROLLER: Φ25mm CENTER DISTANCE OF ROLLERS: FRONT AND MIDDLE: 43mm FRONT AND BACK: 143mm PRESSURE MODE: SPRING CRADLE TWIST SETTABLE RANGE: 200 TO 2,000 TWIST/M RING DIAMETER: RING NOT NEEDED IF THERE IS NO NEED FOR TWISTING FUNCTION. THIS MACHINE WILL USE A SHAFT TO MOVE THE YARN UP AND DOWN TO WIND ON THE PIRN TOTAL KW: 1.5 KW VOLTAGE: 220 VOLTS, 3-PHASE, 60 Hz WEIGHT: 650 KG DIMENSIONS: 1750 x 760 x 1950mm SPINDLE SPEED: 3800 RPM QUANTITY: 1 SET Learn More

YY-2208 HUMAN CREMATION MACHINE, LIGHT DIESEL FUEL, GAS, NATURAL GAS, LIQUEFIED GAS DETAILS: 1. INCORPORATES EFFICIENT HEAT EXCHANGER AND SPECIAL AIR PATH STRUCTURE, MAKE FULL USE OF WASTE HEAT COMBUSTION FUEL GAS, IMPROVING HEAT UTILIZATION RATE, GOOD ENVIRONMENTAL PROTECTION INDEX, SAVES FUEL AND SHORTENS CREMATION TIME. 2. NEW REFRACTORY MATERIALS (EXCLUSIVE FORMULA) THAT ARE RESISTANT TO HIGH TEMPERATURE WITH LOW SPECIFIC HEAT. GREATLY EXTEND THE SERVICE LIFE. 3. SPECIAL CASTING MATERIAL, HIGH TEMPERATURE RESISTANCE, LONG SERVICE LIFE; SHORTENS THE COOLING CYCLE. THE BRICK STRUCTURE ON BOTH SIDES OF THE ASH PICKING FURNACE DOOR WILL NOT HAVE CRACKS CAUSED BY DESIGN OR QUALITY PROBLEMS GUARANTEED FOR ONE YEAR. REFRACTORY MATERIALS, THE FURNACE CONTACT ARE WITH FLAME HAS PHOSPHORIC ACID A CHARACTERISTIC COMBINATION BRICK WHICH CAN RESIST RAPID COOLING AND RAPID HEAT, AND THE ARCHED ROOF INCORPORATES HIGH ALUMINUM SINTERED MOLDING BRICK. THE FURNACE BODY IS SURROUNDED BY ALUMINUM SILICATE WOOL WITH GOOD HEAT INSULATION AND HEAT PRESERVATION PERFORMANCE. THE THICKNESS IS 180mm. 4. ALL OPERATING SYSTEMS OF THE EQUIPMENT HAVE THREE SETS OF OPERATION FUNCTIONS, NAMELY AUTOMATIC, SEMI-AUTOMATIC AND MANUAL, WHICH CAN BE SWITCH BETWEEN THEM WITHOUT INTERFERENCE. AUTOMATIC CONTROL, TELECOMMUNICATION OPERATION AND ANIMATION DISPLAY. KEEPING THE OPERATOR AWAY FROM THE CREMATION SITE AND PROTECTING THE OPERATOR. AT THE SAME TIME EQUIPPED WITH A STANDBY OPERATING SYSTEM. LOW NOISE MOTOR EQUIPMENT, THERMOCOUPLE RESISTANCE TO HIGH TEMPERATURE. ALL ELECTRICAL CABINETS OF THE EQUIPMENT ARE EXTERNAL. 5. THE OIL SUPPLY SYSTEM INCORPORATES AUTOMATIC CONTROL AND MANUAL CONTROL, AND INCORPORATES OIL PROTECTION TECHNOLOGY, WHICH CAN EFFECTIVELY PREVENT FUEL OIL FROM RUNNING, BUBBLING, LEAKING AND CAUSING FURNACE EXPLOSION ACCIDENTS INCLUDING ANTI-LEAKAGE TECHNOLOGY TO BETTER PROTECT THE PERSONAL SAFETY OF OPERATORS. 6. THE BLOWER, THE INDUCED DRAFT FAN, THE FURNACE DOOR MOTOR, THE BODY CART MOTOR, THE PREPARATORY DOOR MOTOR AND THE FLUE GATE MOTOR ARE ALL INSTALLED WITH AN INTEGRATED DEVICE FOR OVER-CURRENT AND SHORT-CIRCUIT PROTECTION. 7. SPECIAL DIESEL METERING DEVICE, ACCURATE METERING. QUANTITY: 1 Learn More

YY-2207 HUMAN CREMATION MACHINE, FUEL DIESEL OR NATURAL GAS EXHAUST OF HARMFUL SUBSTANCES: IN CONFORMITY WITH ISO14001 FUEL: DIESEL OR NATURAL GAS FUEL CONSUMPTION: APPROXIMATELY 10L OF DIESEL FOR ONE CREMATION ON AVERAGE. IF NATURAL GAS, APPROX. 20 CUBIC METERS QUANTITY: 1 Learn More

T-9270 2 1/2″ HPM 24:1 EXTRUDER, COMPLETELY REBUILT, NEW STYRENE SCREW, 40 HP MOTOR AND DRIVE 480 VOLT GOOD CONDITION QUANTITY: 1 Learn More

T-9269 2 1/2” NRM PM 111, REBUILT MACHINE 480 VOLT WITH 110 VOLT CONTROL CIRCUIT QUANTITY: 1 Learn More

T-9264 1 1/2” 24:1 AMERICAN KUHNE AV-150 EXTRUDER, NEW 2004 - RECONDITIONED 1 1/2” 24:1 AMERICAN KUHNE EXTRUDER NEW 2004 RECONDITIONED QUANTITY: 1 Learn More

T-9263 2″ AMERICAN 24:1 KUHNE EXTRUDER, 3 BARREL & 3 DIE ZONES, 20 HP MOTOR AND DRIVE 2″ AMERICAN 24:1 KUHNE EXTRUDER MODEL AK-200 RECONDITIONED VERY GOOD CONDITION QUANTITY: 1 Learn More

TT-1444 NRM 30:1, 6”, AIR COOLED, VENTED, 400 HP EXTRUDER QUANTITY: 1 Learn More