Search results for: 'Machine fl'

J-4356 AUTOMATIC NONWOVEN PET PAD PRODUCTION MACHINE - PRODUCTION CAPACITY: 20 PIECES PER MINUTE AUTOMATIC DISPOSABLE NONWOVEN PET PAD PRODUCTION MACHINE USES ULTRASONIC HOT HEATING, CUTTING AND FOLDING REQUIRES 1 OPERATOR CONTROL MODE: RELAY CONTROL MACHINE DIMENSIONS: LENGTH 8500 x WIDTH 1143 x HEIGHT 1880mm VOLTAGE: 220 VOLTS, 60 Hz, 10 AMPS RATED POWER: 12 KW ACTUAL POWER: 2.7 KW ULTRASONIC POWER: 1.5 KW QUANTITY: 1 Learn More

YY-1966 MELTBLOWN LINE, PRODUCTION SPEED MAXIMUM 100 METERS PER MINUTE 1750mm final trim width (68 inches) DETAILS: CONTAINERS TO SHIP APPROXIMATELY: 15 CONTAINERS 40” OT (THERE MAY BE NEEDED SOME HC OR OUT OF GAUGE CONTAINERS) IT HAS COOLING CALENDER IT HAS WINDER WITH SLITTERS IT PRODUCES 1 TO 5 MICRON (EVEN UNDER 1 MICRON) RANGE OF GSM: IT PRODUCES 15 TO 300 GSM STATUS: ASSEMBLED, IT CAN RUN PRODUCTION YEAR: THE LINE HAS BEEN PRODUCED IN SEPTEMBER 2020 AND IT HAS BEEN IN PRODUCTION ONLY FOR ONE YEAR. QUANTITY: 1 Learn More

V-2005 WARPER AND CREEL FOR DENIM YARNS WITH 48 BEAMS; 1800mm WIDTH X 1400mm DIAMETER MAXIMUM WARPING SPEED: 1000 METERS PER MINUTE WARP DENSITY: 0.3 TO 0.65 G/cm3; BRAKE SYSTEM: PNEUMATIC-HYDRAULIC CLAMP-BRAKES ON GUIDE ROLLER, WARPING BEAM, PRESS ROLLER; BRAKING DISTANCE: ≤4M (AT SPEED OF 500 METERS PER MINUTE); LENGTH MEASURING: LENGTH MEASURING ON PRESSURE ROLLER WHEN WORKING, LENGTH MEASURING ON WARPING BEAM WHEN PRESS ROLLER BACKWARDS; LENGTH MEASURING ACCURACY: ±0.1%; PRESS METHOD: CYLINDER PUSHES PRESS ROLLER GIVING PARALLEL PRESSURE ALONG THE INCLINED LINEAR GUIDE, PNEUMATIC DISC OFFERS AUXILIARY DAMPING PRESSURE; EXPANSION REED TYPE: W SHAPE, MOVABLE UP AND DOWN, LEFT AND RIGHT; REED TRAVERSE RANGE: 0 TO 40mm ADJUSTABLE; REED TRAVERSE ADJUSTMENT: MANUALLY; REED TRAVERSE FREQUENCY: 24 CYCLES PER MINUTE; EXPANSION REED STRETCH METHOD: ELECTRICAL; REED CENTERING METHOD: ELECTRICAL; BEAM CLAMP: PNEUMATIC; PRESS ROLLER CENTERING: ELECTRICAL; WORKSTATION: TOUCH SCREEN, BUTTONS ON SAFETY BAR. QUANTITY: 1 SET SHIPPING NOTICE: 1 40FT CONTAINER FOR WARPER AND CREEL 1 40FT CONTAINER FOR 48 BEAMS TIME TO BUILD THE MACHINE: 100 DAYS Learn More

REFERENCE NUMBER: M-7900

PATTERN TEMPLATE SEWING MACHINE

 

PATTERN TEMPLATE SEWING MACHINE

COMPUTER-CONTROLLED, PROGRAMMABLE

MAXIMUM SPEED: 3,000 STITCHES PER MINUTE

MAXIMUM SEWING SPEED: 10 METERS PER MINUTE

MAXIMUM MOVING SPEED: 80 METERS PER MINUTE

 

QUANTITY: 1

Learn More

R-3261 OFFICINE VITTORIA ROASTER WORKING ANTIQUE - 20 KILOS

NICE RESTORED WORKING ANTIQUE FOR THE CIRCA 1950'S. THERE IS A LITTLE GAS BURNER ON THE END OF THE HEAT INLET TUBE - AS THAT IS A COMMON FIX AS ORIGINALLY THE HEAT CAME FROM AN INCINERATOR LOOKING COAL BURNER - SO THE STICKING OF A SMALL PACKAGE BURNER ON THE SAME INLET TUBE WORKS GREAT AS THE SUCTION EXHAUSTING THE AIR THROUGH THE ROASTING DRUM (PERFORATED) SIMPLY PULLS IN THE HEAT NEEDED AND EVERYBODY IS HAPPY. YOU WILL NEED TO SUPPORT THAT INLET ARM IN SOME MANOR.

ADDITIONAL CONCERN IS THERE IS NO SHOWN CHAFF COLLECTOR - AS I WILL HAVE TO VERIFY IF THERE IS ONE - OTHERWISE A SEPARATE CHAFF COLLECTOR WILL NEED TO BE ADDED. THIS IS ALL SET FOR EUROPEAN VOLTAGE - 3 PHASE.

KEEP IN MIND, THE BASE IS ALL CAST IRON - SO THIS OPERATES REALLY QUIETLY, AND THAT IS A GOOD THING. THE SHOWMANSHIP IS STRONG ON THIS MACHINE AS IT LOOKS REALLY GREAT ON A SHOWROOM OR COFFEEHOUSE FLOOR. AS IT IS MADE TO BE SEEN. THIS IS A PARTIAL PROJECT AS THE INSTALLATION WILL TAKE SOME DETAIL AND REMEMBER THAT THERE ARE NO OFFICIAL PARTS SUPPLY - BUT EVERYTHING ON THESE MACHINES IS QUITE EASY TO ACCESS AND HAVING A LOCAL MACHINE SHOP AT HAND IS PROBABLY GOING TO BE NEEDED IN THE FUTURE - AFTER ALL, IT IS A 1950'S VINTAGE.

ALLOW FOR A FLOOR SPACE OF 4' X 7' TO ACCOMMODATE THE ROASTER AND CHAFF COLLECTOR. (1.22M X 2.12M)

THERE WILL BE SOME COST TO CRATE - TO BE ADVISED AS SOON AS YOU KNOW THIS IS THE RIGHT MACHINE FOR YOUR OPERATION.

IN PERFECT WORKING CONDITION

QUANTITY: 1

Learn More

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

 

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

 

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

 

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

 

QUANTITY: 1

Learn More

TT-7461 TETRA PAK® TBA 19 FILLING MACHINE, YEAR 1996 1. TETRA PAK® TBA 19 FILLING MACHINE 2. YEAR OF CONSTRUCTION 1996 3. CONDITION USED 4. MACHINE TYPE: FILLING MACHINE 5. BRAND: TETRA PAK® 6. MODEL: TBA 19 7. OPERATING HOURS: 45,739 H QUANTITY: 1 Learn More

TT-6338 COMPLETE PULP MILL SOLD IN SECTIONS-PARTS, CAPACITY 350,000 TPY 1. IN GOOD WORKING CONDITION 2. STOPPED 2023 3. EQUIPMENT NOT AVAILABLE FOR LONG 4. COMPLETE PULP MILL. Learn More

TT-4981 BARBERAN JETMASTER 630 SINGLE PASS DIGITAL PRINTER, WIDTH 28”, YEAR 2021 BARBERAN JETMASTER 630 SINGLE PASS DIGITAL PRINTER YEAR 2021 MACHINE IS AVAILABLE IMMEDIATELY 28” WIDTH X 23’ LENGTH POWERED BELT CONVEYOR (3) 2.9 KW VACUUM MOTORS WITH SILENCERS Learn More

TT-3385 MASTER BAG 350, WIDTH 250mm, YEAR 2023 CATEGORY BAG MAKING BRAND MASTER BAG MODEL 350 YEAR 2023 QUANTITY: 1 Learn More