Search results for: 'comb''

T-9486 MENZEL COATING RANGE, WIDTH 2600mm, YEAR 2005 SPECIFICATIONS: YEAR: 2005 ROLLER WIDTH: 2800mm COATING ROLLER WITH DOCTOR STRIPPING DEVICE COATING BEAM EQUIPPED WITH 2 COATING KNIVES MATERIAL WIDTH: 2600mm SPEED: 3-35 M/MIN. BURNER CAPACITY: ZONE 1 (INLET) 150 KW, ZONES 2-5 100 KW VOLTAGE: 3X 480 V AC, +/- 10% FREQUENCY: 60 Hz CONTROL VOLTAGE: 24 V DC COMPRESSED AIR: 6 BAR AVAILABLE IMMEDIATELY QUANTITY: 1 Learn More

YY-2314 CATERPILLAR 26.4 MEGAWATT POWER PLANT A COMBINED 26.4MW OF DIESEL POWER GENERATION CONSISTING OF SIX USED CAT C280-16 (16 CYLINDER) 4.4MW (4400 KW) DIESEL GENERATORS, SEVEN (7) CONTROL MODULES, SWITCHGEAR, EXHAUST SYSTEM, RADIATORS, TRANSFORMER, SPARE PARTS, AND SIX (6) CAIN HEAT RECOVERY SYSTEMS. MORE DETAILS (DRAWINGS AND MORE) ON THIS DECOMMISSIONED AND DISASSEMBLED SURPLUS CAT C280-16 DIESEL POWER PLANT CAN BE PROVIDED UPON REQUEST. THIS PLANT HAS LOW HOURS ON IT. THE GENERATORS HOURS ARE AS FOLLOWS: 1. UNIT #6 UNUSED (2018); 2. UNITS #2 TO 5 (LITTLE HOURS); 3. UNIT #1 (17,000 HOURS). FINNING WAS PART OF THIS CAT’S 26.4 MW POWER PLANT’S RECENT DECOMMISSIONING, EACH INDIVIDUAL CATERPILLAR C280-16 DIESEL ENGINE WILL BE PRESERVED, AND INSPECTION REPORTS WILL BE MADE AVAILABLE UPON REQUEST. LOAD GENERATION TESTS FOR THESE SIX (6) CATERPILLAR 4.4 MW C280-16 GENERATOR PACKAGES ARE AVAILABLE UPON REQUEST. CATERPILLAR 26.4 MEGAWATT POWERPLANT BRAND: CATERPILLAR MODEL NO: C28-16 Learn More

TT-2008 KUSTER CALENDER LINE, WIDTH 2800mm, YEAR 1995 QUANTITY: 1 Learn More

TT-2007 OSTHOFF SINGEING MACHINE, WIDTH 3600mm, YEAR 2001 QUANTITY: 1 Learn More

YY-2358 DM5 HOT MELT PAIL UNLOADER THE DM5 IS A STATIONARY PAIL MELTER (UNLOADER) THAT COMBINES A HEATED PLATEN, PUMP AND ALL CONTROLS NEEDED TO MELT AND DISPENSE HOT MELT ADHESIVES, SEALANTS, PURS OR COATINGS FROM A STANDARD 5-GALLON STEEL PAIL. THE CONTROLLER PROVIDES ACCURATE, PROPORTIONATE TEMPERATURE CONTROL FOR THE PLATEN, HOSES AND APPLICATORS. A “STANDBY” TEMPERATURE MAY BE PROGRAMMED SO THAT THE TEMPERATURE ZONES CAN BE INDEPENDENTLY MAINTAINED AT A LOWER TEMPERATURE WHEN THE UNIT IS NOT IN ACTIVE USE, ENABLING RAPID RETURN TO NORMAL OPERATION. A VARIETY OF GEAR PUMPS ARE AVAILABLE. THE MELTER CAN BE UTILIZED AS A BULK-TRANSFER UNIT OR AS A STAND-ALONE UNIT. IT CAN SUPPLY ONE OR TWO HAND-HELD APPLICATORS OR OTHER APPLICATORS. QUANTITY: 1 Learn More

TT-1923 RARE TLC 10000 TON FLOATING DOCK, LIFTING CAPACITY 10,000TON, YEAR 1986 REBUILT 2008 THIS DOCK IS CURRENTLY IN OPERATION, AND IT HAS BEEN REGULARLY INSPECTED AND MAINTAINED. THEREFORE, YOU CAN VISIT THERE AT ANY TIME FOR YOUR ON-SITE INSPECTION. THE CLASS CERT. DOESN'T EXIST BECAUSE THIS SIZE IS CLASSIFIED AND REGISTERED AS A CONSTRUCTION EQUIPMENT QUANTITY: 1 Learn More

TT-1895 ZONCO OPEN WIDTH WASHING MACHINE LL4INOX COMPLETE WITH CENTERING DEVICE BIANCO WASHING MACHINE FOR OPEN-CLOTHS «RAPID» LL-4 INOX HIGH QUALITY RESULTS AND COST REDUCTION THE DATA IN THIS PAMPHLET ARE GIVEN AS AN INDICATION, AND OUR COMPANY IS ENTITLED TO MODIFY THE DESCRIBED MACHINE AT ANY TIME, OWING TO TECHNICAL OR COMMERCIAL REASONS. QUANTITY: 1 Learn More

YY-2251 AIRLAID PRODUCTION LINE, FINAL PRODUCT WIDTH 2200mm ITEM 001 BALE OPENER (2 SETS) AND SEALED BALE OPENER (1 SET) ITEM 002 FIBER OPENING MACHINE (FOR LOW MELT FIBER OR PP) - 1 SET ITEM 003 PRE-OPENER – 1 SET ITEM 004 BIG CHAMBER BLENDER – 1 SET ITEM 005 MAIN-OPENER – 1 SET ITEM 006 VIBRATING FEEDER – 1 SET ITEM 007 CONDENSER – 2 SETS ITEM 008 AUTO-LEVER - 1 SET ITEM 009 AIR LAID MACHINE – 1 SET ITEM 010 AUTO-LEVER – 1 SET ITEM 011 BATT FEEDER – 1 SET ITEM 012 HIGH SPEED SINGLE SHAFT SINGLE BOARD PRE NEEDLE LOOM – 1 SET ITEM 013 HIGH SPEED SINGLE SHAFT SINGLE BOARD MAIN NEEDLE LOOM – 1 SET ITEM 014 DOUBLE BELT THERMAL-BONDED OVEN – 1 SET ITEM 015 DOUBLE-ROLLER CALENDER MACHINE – 1 SET ITEM 016 COOLING UNIT – 1 SET Learn More

TT-1792 KUHNE 5-LAYER BLOWN FILM COEX LINE, YEAR 2012 KUHNE 5-LAYER BLOWN FILM COEX LINE USED YEAR 2012 5 LAYERS FILM STRUCTURE: ABCDE QUANTITY: 1 Learn More

TT-1726 POLYPROPYLENE TAPE LINE EXTRUDER 15 TONS DAILY CAPACITY, 264 WINDERS, YEAR 2012 POLYPROPYLENE TAPE LINE EXTRUDER 15 TONS DAILY CAPACITY CONDITION: USED MODEL: POLYPROPYLENE TAPE LINE EXTRUDER CAPACITY: 15 TONS DAILY CAPACITY YEAR: 2012 QUANTITY: 1 Learn More