Search results for: 'Manual boo'

NON-INVASIVE VENTILATOR
CERTIFICATE: CE
MEDICAL VENTILATOR
TECHNICAL PARAMETERS OF DOUBLE LEVEL VENTILATOR
VENTILATOR TYPE: ELECTRIC CONTROL
SCOPE OF APPLICATION: TREATMENT AND TITRATION OF SLEEP APNEA HYPOPNEA SYNDROME, SEVERE SNORING, AND RESPIRATORY INSUFFICIENCY.
DISPLAY INTERFACE: 3.5-INCH LED SCREEN, CHINESE OPERATING SYSTEM
*VENTILATION MODE: CPAP, S, S/T, T
PRESSURE RANGE:
PRESSURE RANGE: 4-30CMH2O (±0.5CMH2O)
PRESSURE ACCURACY: + 0.5CMH2O
PARAMETER SETTING:
DELAYED BOOST: 0-60MIN, SET THE DIVISION INTERVAL 5MIN
INITIAL PRESSURE: 4CMH2O TREATMENT PRESSURE / RESPIRATORY PRESSURE SETTING
THERAPEUTIC PRESSURE: 4-20CMH2O (IN CPAP MODE)
TARGET TIDAL VOLUME: 150ML - 1500ML, ON/ OFF
MAXIMUM SUCTION PRESSURE: 4-30CMH2O, (CAN BE SET WHEN THE TARGET TIDAL VOLUME FUNCTION IS ON)
MINIMUM SUCTION PRESSURE: 4-30CMH2O (NOT HIGHER THAN THE SUCTION PRESSURE), (CAN BE SET WHEN THE TARGET TIDAL VOLUME FUNCTION IS ON)
INSPIRATORY PHASE PRESSURE: 4-30CMH2O
EXPIRATORY PRESSURE: 4-30CMH2O
EXPIRATORY DECOMPRESSION: PATIENT, OFF, 1-3, THREE ADJUSTABLE
MANUAL VOLTAGE REGULATION: 0-2 GEAR, 0-2CMH2O (ONLY AVAILABLE IN CPAP MODE)
INSPIRATORY SENSITIVITY: 1-8 STALLS
EXPIRATORY SENSITIVITY: 1-8 STALLS
RESPIRATORY FREQUENCY: 3-40 TIMES / MIN
INSPIRATORY TIME: 0.3-3.0S
BACKUP RATE: ON / OFF, DEFAULT 10
PRESSURE RISE TIME: 1-4 STALLS
HUMIDIFIER: 1-5 ADJUSTABLE IN 5 GEARS
*TITRATION FUNCTION: SUPPORT MANUAL AND AUTOMATIC PRESSURE TITRATION, BUILT-IN REMOTE WIRELESS COMMUNICATION MODULE, COMPLETE THE RANDOM SWITCHING OF SINGLE AND DOUBLE LEVEL MODES IN THE TITRATION PROCESS, AND CONTROL MORE THAN 11 VENTILATOR PARAMETERS AT THE SAME TIME.
AUXILIARY FUNCTION: AUTOMATIC AIR LEAKAGE COMPENSATION, AUTOMATIC STARTUP, AUTOMATIC SHUTDOWN, DELAYED SHUTDOWN, SCREEN BACKLIGHT ADJUSTMENT
MONITORING PARAMETERS: PRESSURE, TIDAL VOLUME, RESPIRATORY RATE, MINUTE VENTILATION VOLUME, AIR LEAKAGE VOLUME, INSPIRATORY TIME, BLOOD OXYGEN SATURATION
WAVY CURVE: PRESSURE TIME WAVEFORM, FLOW RATE TIME WAVEFORM
ALARM PROMPT: PIPELINE AND MASK FALLING OFF, AIR LEAKAGE PROMPT, POWER INTERRUPTION, TREATMENT MACHINE FAILURE, HUMIDIFIER FAILURE, LOW VOLTAGE, HIGH RESPIRATORY RATE, LOW RESPIRATORY RATE, LOW MINUTE VENTILATION VOLUME, LOW BLOOD OXYGEN, REPLACEMENT OF FILTER COTTON, FULL SD CARD, RE INSERTION OF SD CARD
*DATA MANAGEMENT:
NETWORK DATA: BMC + RESPIRATORY HEALTH MANAGEMENT CLOUD PLATFORM
SD CARD DATA: RESART NPAP DATA ANALYSIS SOFTWARE
PARTS:
SD CARD: STANDARD
SD CARD SLOT: STANDARD
PIPING: 9 22MM, 1.8M LONG
FACE SHIELD: F2 NOSE MASK AS STANDARD
NOISE: LESS THAN 30DB
ENVIRONMENT CONDITION:
TEMPERATURE:
(WHEN USED) 5 -35 C
(DURING TRANSPORTATION AND STORAGE) -20 C -55 C
ATMOSPHERIC PRESSURE:
(WHEN USED) 760-1060HPA
(DURING TRANSPORTATION AND STORAGE) 760-1060HPA
WORKING HOURS: MORE THAN 8 HOURS
POWER SUPPLY REQUIREMENTS:
AC VOLTAGE: 100-240V
FREQUENCY: 50HZ/60HZ
INPUT POWER: LESS THAN 2A
WATERPROOF LEVEL: IP22 - DRIP PROOF EQUIPMENT
INSTRUMENT SIZE: 290mm X 180mm X 134mm
WEIGHT: 1.5KG (EXCLUDING HUMIDIFIER) 2.5KG (INCLUDING HUMIDIFIER)
ITEM 001
QUANTITY: 10 SETS-999 SETS
ITEM 002
QUANTITY: 1,000 SETS-9,999SETS
ITEM 003
QUANTITY: ≥10,000 SETS

Learn More

ITEM 001 - MASK PRODUCTION MACHINE WITH (2) ULTRASONIC EAR STRAP WELDING DEVICES
FOR THE PRODUCTION OF SURGICAL MASKS WITH FILTRATION EFFICIENCY OF NO LESS THAN 95% (N95)
CAPACITY: 50 FOLDED N95 MASKS PER MINUTE
MASK DIMENSIONS: 175mm x 95mm
MATERIAL TYPE: 3 LAYERS OF POLYPROPYLENE NONWOVEN COMPOSITE FIBER
OPERATION CONTROLLED BY LCD TOUCH SCREEN
AUTOMATICALLY ALIGNS 3 ROLLS OF MATERIAL TO FEED IN (OUTER, FILTER AND INNER LAYERS)
PRESSES BOTH SIDES TOGETHER SYMMETRICALLY WHILE WELDING WITH ULTRASONIC HEAD
SPLITS TO 2 SERPATE WELDING DEVICES FOR EARLOOPS AND SENDS TO DIGITAL COUNTER
EARLOOPS ARE FINISHED WITH ULTRASONIC CUTTING AND WELDING
NOSE BRIDGE CAN BE PRODUCED WITH AUTOMATIC FEEDING, CUTTING AND ULTRASONIC WELDING
ULTRASONIC HEADS
VOLTAGE: 220 VOLTS
WATTS CAPACITY: 1500 WATT
FREQUENCY (KHZ): 20 KHZ
WARRANTY PERIOD FOR HEADS: 1 YEAR
COMPONENT MANUFACTURERS
SERVO MOTOR: PANASONIC / SCHNEIDER
CONTROL SYSTEM: PROPRIETARY
ULTRASONIC GENERATOR: PROPRIETARY, 220 VOLTS, 1.5 KW, 20 KHZ
SENSOR: OMRON / SICK
PNEUMATIC COMPONENT: SMC / FESTO
BELT: SAMSUNG / BANDO
MAIN BODY: PRE-MADE MATERIAL, WELDED ASSEMBLY
BEARINGS: NSK
BALL SCREWS: HIWIN
SECURITY DEVICE: SICK (SAFETY DEVICES TO PROTECT WORKERS)
TOTAL POWER: 4 KW
MACHINE MUST BE STOPPED TO FEED NEW ROLL OF MATERIAL
END OF ROLL DETECTOR INCLUDED: WHEN FABRIC IS FINISHED THE MACHINE WILL ALARM AND STOP
AIR PRESSURE: 0.6 MPa
VOLTAGE: 220 VOLTS, 60 Hz
DIMENSIONS: 6400mm x 4700mm x 1700mm
INCLUDES ELECTRONIC MANUAL BOOK (STORED ON USB MEMORY) AND WARRANTY CARD
OPTIONS (INQUIRE FOR PRICING): EAR STRAP FOLDER

ITEM 001 QUANTITY: 1 MASK PRODUCTION MACHINE AND 2 ULTRASONIC WELDING DEVICES FOR EAR STRAPS

ITEM 002 AUTOMATIC BAGGING MACHINE
SUITABLE FOR AUTOMATIC BAGGING OPERATIONS FOR VARIOUS MASK TYPES
MOTOR CONTROL SYSTEM: SERVO (3), AUTOMATICALLY SETS BAG LENGTH (UP TO 400mm) FOR SPECIFIED BAGGING LENGTH, WITH ANTI-AIR BAG , AUTOMATICALLY DETECTS PRODUCT BASE POINT AND MATERIAL POSITION, AUTOMATIC STOP WHEN OUT OF MATERIAL & STARTS WHEN MATERIAL IS PRESENT
FAST & CONVENIENT SETTING OF PARAMETERS, STORES SETS OF PARAMETERS FOR MULTIPLE PRODUCTS, OPERATOR CAN CHOOSE PARAMETERS ACCORDING TO PRODUCT SIZES
DIAGNOSTICS SYSTEM CLEARS ERROR & RESETS IN SINGLE STEP
HIGHLY SENSITIVE PHOTOELECTRIC EYE COLOR MARK TRACKER, DIGITAL INPUT SEAL/CUT POSITION MAKES SEAL & CUT POSITIONS MORE ACCURATE
TEMPERATURE CONTROLLED WITH INDEPENDENT PID, ALLOWS FOR VARIOUS MATERIALS IN PACKAGING
SIMPLE TRANSMISSION SYSTEM ALLOWS FOR EASY MAINTENANCE AND RELIABILITY
ALL CONTROLS SET BY SOFTWARE ALLOWING FOR ADJUSTING OF FUNCTIONS AND UPGRADES
MATERIALS
PVC FILM (HEAT SEALING), BOPP, OPP, CPP, ALUMINIZED PET FILM, ALUMINUM-PLASTIC FILM, PAPER FILM, PAPER GLUE, OTHER SINGLE- OR MULTIPLE-LAYERED HEAT-SEALED DIALYZABLE MATERIALS, ETC.
LENGTH OF PACKAGE BAGS: ≤400mm
WIDTH OF PACKAGE BAGS: 100 TO 165mm
HEIGHT OF PRODUCT: 55mm MAXIMUM
LENGTH OF FILM: 360mm MAXIMUM
DIAMETER OF FILM ROLL: 320mm MAXIMUM
CAPACITY/SPEED OF PACKAGING: 40 TO 230 BAGS PER MINUTE (1 TO 20 PIECES PER BAG)
POWER: 220 VOLTS, 50 OR 60 Hz, 2.4 KW
DIMENSIONS: 4050mm x 750mm x 1450mm
WEIGHT: APPROXIMATELY 300 KGS
COMPONENT MANUFACTURERS
TOUCH SCREEN: WEINVIEW
SERVO MOTOR: DORNA / WEIDE
SERVO CONTROLLER: DORNA / WEIDE
PROXIMITY SWITCH: OMRON
PHOTOELECTRIC SWITCH: OETAI
TEMPERATURE CONTROLLER: YATAI
SOLID STATE RELAY: SCHNEIDER
INTERMEDIATE RELAY: WEIDMUELLER
OPTIONS, INQUIRE FOR PRICING: STRAIGHT GRAIN SEALING, STAINLESS STEEL FRAME, CODE STAMPER (PRODUCTION DATE), EXHAUST (PINHOLE EXHAUST FEATURE)

ITEM 002 QUANTITY: 1 BAGGING MACHINE

ENTIRE LINE COMPOSED OF ITEM 001 AND ITEM 002

 

Learn More

C-4003 CATERPILLAR 3516C HD, WIDTH 85, YEAR 2008 - NEW

CATERPILLAR 3516C HD
PRODUCT:
ENGINE BRAND: CATERPILLAR
ENGINE MODEL: 3516C HD
0 HOURS SINCE NEW
2682 HP @ 1600RPM
ENGINE RATING: MAXIMUM CONTINUOUS "C" RATING
YEAR: 11-SEP-2008
GOVERNOR: ELECTRONIC

DESCRIPTION:
AIR CLEANER: DRY TYPE
FLYWHEEL HOUSING SIZE: SAE 00
COOLING: HEAT EXCHANGED
ALTERNATOR: 24 VOLT ALTERNATOR
STARTER: 24 VOLT ELECTRIC STARTER
TIER RATING: 2
DIMENSIONS:
LENGTH: 150
WIDTH: 85
HEIGHT: 92
WEIGHT: 21000 POUNDS

QUANTITY: 1

Learn More

C-4002 CATERPILLAR 3516C HD, WIDTH 85, YEAR 2008 - NEW

CATERPILLAR 3516C HD
PRODUCT:
ENGINE BRAND: CATERPILLAR
ENGINE MODEL: 3516C HD
0 HOURS SINCE NEW
2682 HP @ 1600RPM
ENGINE RATING: MAXIMUM CONTINUOUS "C" RATING
YEAR: 10-SEP-2008

DESCRIPTION:
AIR CLEANER: DRY TYPE
FLYWHEEL HOUSING SIZE: SAE 00
COOLING: HEAT EXCHANGED
ALTERNATOR: 24 VOLT ALTERNATOR
DIMENSIONS:
LENGTH: 150
WIDTH: 85
HEIGHT: 92
WEIGHT: 21000 POUNDS

QUANTITY: 1

Learn More

P-2927 ROLANDO RC SILVER OPENER WIDTH 500mm YEAR 1998

ROLANDO
TYPE: RC
SILVER OPENER
YEAR: 1998
WORKING WIDTH: 500mm

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-2246 FOAM DRILLING MACHINE-FOR FOAM MATTRESS 2200 X 2200 X 1800mm MODEL F26 LOADING CONVEYOR 2100 X 2100mm UNLOADING CONVEYOR 2100 X 2100mm MAX. DRILLING WIDTH 2100mm MAXIJMUM LENGTH 2100mm MAX. DRILLING HEIGHT 180mm HOLE DIAMETER 6-30mm QUANTITY AVAILABLE: 1 Learn More

G-1535 FOAM DRILLING MACHINE (FOAM PERFORATING MACHINE) MODEL: NOVA 26 TECHNICAL DATA: LOADING CONVEYOR: 2100 X 2100mm (82" X 82") UNLOADING CONVEYOR: 2100 X 2100mm (82" X 82") MAXIMUM DRILLING WIDTH: 2100mm (82") MAXIMUM DRILLING HEIGHT: 180mm (7") HOLE DIAMETER: 6 TO 30mm (1/4" TO 1.18") MAXIMUM CONTEMPORANEOUS HOLES NUMBER: 26 MINIMUM DISTANCE BETWEEN THE CHUCKS: 80mm POWER: 11 KW VOLTAGE: AS PER CUSTOMER WORKING PRESSURE BAR: 6 (90 PSI) NET WEIGHT: 2293 KGS (5000 LBS) FLOOR SPACE: 4375 X 3780 H 2204mm Learn More

REFERENCE NUMBER: G-1384 VERTICAL SEMIAUTOMATIC FOAM CUTTING MACHINE MODEL BF 2200 WORKING TABLE ON THE RIGHT OF BLADE 2200mm (86.6") WORKING TABLE ON THE LEFT OF BLADE 1280mm (50") WORKING CUTTING LENGTH 2400mm (94.4") WORKING CUTTING HEIGHT 1300mm (51") HEADBOARD HEIGHT 1250mm (49") QUANTITY AVAILABLE: 1 Learn More

MODEL #7500- 84" 1X3X6 - 3 NEEDLE BARS SPACED 3" APPART - NEEDLES AT 1" C/C WE USED ONLY ONE NEEDLE BAR, OCCASIONALLY 2 SO WE REMOVED THE 3RD BAR. THE MACHINE HAS AUTO SHUT OFF UPON THREAD BREAKING WHICH COULD BE RE-CONNECTED. WE HAVE EXTRA SHUTTLE STICKS AND SHUTTLES FOR #10 BOBBINS. AS WELL WE HAVE THE MANUALS, PATTERN BOOKS, PARTS LISTS AND THREAD STAND. THE MOTOR IS 220 VOLT 3PH 60 CYCLE.SEE PLATE Learn More