Search results for: 'SPARES'

TT-1885 MITSUI-ALSTOM STEAM TURBINE PLANT, 97.5MW 60Hz MITSUI-ALSTOM STEAM TURBINE PLANT NEVER-USED 13800V 97.5MW 60Hz AVAILABILITY IMMEDIATELY AVAILABLE QUANTITY: 1 Learn More

J-4564 5 KILO SAMPLE SOFT FLOW MACHINE CAPACITY 5 TO 10 KILO MATERIAL CONSTRUCTION [HTHP-VESSEL] 316 L 5 mm THICKNESS PUMP SS 316 – MOTOR HP 3 HP – 1500 RPM DIAMETER OF VESSEL 1150 mm TOTAL LENTGH 2200 mm TOTAL WIDTH 3900 mm MAXIMUM WORKING HIGH TEMP. 135° C MAXIMUM WORKING PRESSURE 3 KG/ cm2 TUBE 1 TUBE SIZE DIAMETER 200 mm NOZZLE SIZE [OVERFLOW FIX ] DIAMETER 190 mm X 168 mm INSIDE WINCH (HP) 1 HP X 1 FOR FULLY AUTO COLOR TANK INJECTION PUMP 1 HP/3000 RPM UNLOADING WINCH 1 HP /200RPM GEAR BOX COLOR TANK (LITERS) 20 LITERS X 2 PIECES FILL (AUTO) DIAMETER 1.5” X 2 DRAIN [ AUTO] DIAMETER 1.5 ” X 2 OVER FLOW [AUTO] DIAMETER 1.5” X 1 HEAT [ AUTO] DIAMETER 1” COOL [ AUTO] DIAMETER 1” LIQUOR RATIO 1: 5 TO 1 : 7 [ DEPEND ON FABRIC] QUANTITY: 1 Learn More

T-9989 TRUTZCHLER - TOYOTA - MURATA COMPLETE 37000 SPINDLE RING SPINNING PLANT, YEAR 2018 WITH THE TOP OF THE LINE UP TRUTZSCHLER BACK PROCESS, TOYOTA RING FRAME AND MURATEC QPRO LINK CORNER Learn More

R-3259 PRIMO 35 ROASTER TOP CONDITION 2009 - 15 KILOS

35 # PER BATCH
35 LBS. CAPACITY, CARBON STEEL DRUM, INFRARED CERAMIC BURNERS.
ROAST AND COOL AT THE SAME TIME - AS EACH FUNCTION HAS INDEPENDENT FANS, MOTORS AND CONTROL.
EXTRA SET OF BURNERS INCLUDED AS SPARES FOR FUTURE USE WHEN NEEDED
PROPANE HEAT - 96,000 BTU
220 VOLT 60HZ SINGLE PHASE ELECTRICAL
WIRED FOR CROPSTER OR ARTISEN PROFILE TRACKING
REMOTE CHAFF COLLECTOR
MAIN ROASTER BODY - 30" X 66" X 73" TALL - PLUS ROOM FOR PIPES AND MOTOR SERVICE IN THE BACK.
ALLOW ANOTHER 36" SQUARE AREA FOR CHAFF COLLECTION - AND KEEP IN MIND THAT THE LOCATION IS VERY USABE TO FIT YOUR FACILITY.

THIS PRIMO 35 IS A GOOD LOOKING ROASTER - AND IT HAS BEEN USED SPARINGLY SINCE 2009 AS THIS IS A "SMALL BATCH" USE BY A MUCH LARGER INSTITUTIONAL-TYPE OPERATION - BUT HIS WHOLE BEAN BUSINESS HAS GROWN AND IT IS NOT COST EFFECTIVE TO HAVE A DEDICATED ROASTMASTER JUST DOING 15 KILO PER BATCH. SO A LARGE MACHINE IS BEING INSTALLED. GOOD NEWS FOR THE BUYER.

ANYBODY LIKING DIEDRICH ROASTERS WILL BE HAPPY WITH THIS AS THEY ARE INTERNALLY SIMILAR AS THE OWNER OF PRIMO USED TO BE SHOP FOREMAN BACK WHEN DIEDRICH WAS LOCATED IN CALIFORNIA. ANOTHER THING THAT IS NICE ABOUT THIS MACHINE IS THE EASE OF WORKING ON IT IF AND WHEN IT REQUIRES ATTENTION. MOST EVERY PART IN THE MACHINE IS "OFF THE SHELF" AND THAT MAKES REPAIRS AND MAINTENANCE REAL EASY. MAKE SURE YOU LUBE ON SCHEDULE AND MAKE SURE YOU USE HIGH TEMP GREASE (LINK) AS EXAMPLE, ALTHOUGH THERE ARE OTHER SELECTIONS IN THAT SAME AREA OF THE WEB STORE.

LOTS OF PEOPLE USE THIS MACHINE AS A "STARTER MACHINE" SINCE IT IS SO EASY TO OPERATE. EVEN IF YOU DO NOT USE FANCY PROFILE TRACKING - IT IS STILL GREAT FOR MANUAL ROASTING AND HANDS-ON DEVELOPMENT.

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-6075
SULZER P7200 & P7250 TERRY LOOMS, WIDTH 3600mm, YEAR 2000, DOBBY

DETAILS:
TERRY WEAVING LOOMS
MAKE: SULZER
(2) X MODEL P7250
(4) X MODEL P7200
YEAR: 2000
WIDTH: 3600mm
DOBBY 20/20 (10 INSTALLED) 
EACH LOOM HAS 4 FEEDERS
3500 DROPPERS 
7,000 YARNS FRAME FOR NORMAL PRODUCTION OF TOWEL LOOMS
EACH 2 LOOMS HAVE A TOOL BOX
SPARE GRIPPER AND RIBBON EACH 2 LOOMS
2 BEAMS ON LOOM AND 3 SPARES
3 SETS OF SPARE GRIPPER AND RIBBON FOR THE 6 LOOMS 
OFF LOOM TAKE UP

QUANTITY: 6

Learn More

REFERENCE NUMBER: M-6245
KRENZLER LACE BRAIDING MACHINES YEAR 1992

LACE BRAIDING MACHINES
MAKE: KRENZLER
YEAR: ~1992
1 x 56 SPINDLES
5 x 52 SPINDLES
11 x 48 SPINDLES
1 x 44 SPINDLES
ALL THESE MACHINES ARE KRENZLER PITCH 55mm

QUANTITY: 18

Learn More

REFERENCE NUMBER: M-5982 (8802DNWT7UX) L STRAYFIELD HIGH FREQUENCY DRYER 90 KVA YEAR 1988 – 1400mm HIGH FREQUENCY DRYER MAKE: STRAYFIELD MODEL TYPE: SS040/TP CURRENT POWER SUPPLY: 415 VOLT / 50 HZ SUPPLY PHASES: 3 SUPPLY KVA: 90 R.F. POWER OUTPUT: 40 KW OPERATING FREQUENCY: 27.12 MHZ YEAR OF MANUFACTURE: 1988 EVAPORATION CAPACITY: 52 KGS PER HOUR STANDARD CONVEYOR (BAND) WIDTH: 1400mm CONVEYOR LENGTH: INFEED: 3000mm DRYING CHAMBER: 5100mm OUTFEED: 1400mm TOTAL CONVEYOR LENGTH: 1400mm 1400mm OUTFEED WILL FIT INTO ONE 40’ FOOT CONTAINER THE EQUIPMENT IS ASSEMBLED AND CAN BE SEEN RUNNING PRICE IS AS-IS, INCLUDES SPARES QUANTITY AVAILABLE: 1 Learn More

MODEL: FS-30
TOTAL POWER: 36KW
MACHINE WEIGHT: 2000KG
SCREEN SIZES INCLUDED (8mm, 18mm, 30mm): 3 PCS
GRINDER MOTOR: 30 kw (40Hp)
SUCTION FAN MOTOR: 5.5 kw
HOPPER SIZE OPENING AT THE TOP 890mm (35") x 915mm (36")
CUTTING CHAMBER WIDTH: 890mm (35")
MACHINE DIMENSIONS: 3400 L x 2150 W x 1900mm H (133" x 84" x 75")
CUTTING METHOD: 3 HEAD ROTATING UNIT WITH ONE BLADE ON EACH HEAD CUTTING
AGAINST 4 STATIONARY (FIXED) BLADES ; BLADE THICKNESS 18mm (.7 INCH)
CHAMBER SIZE 11 INCH X 34 INCH (280mm X 864mm)
CHAMBER COOLING PUMP WITH RECIRCULATION TANK
STANDARD SCREEN SIZES : 30mm , 18mm , 8mm

MANY DIFFERENT SIZES OF SCREENS AVAILABLE (SPARES CAN BE ORDERED)

Learn More

REFERENCE NUMBER: M-5219 (13132318KLF12U) L NACHI ROBOTS YEAR 2006 NACHI FUJIKOSHI JAPAN MANUFACTURING DATE YEAR 2006 FOR ALL MODELS INSTALLED MAY 2007 (27) X NACHI SJ-120C YEAR 2006 120KG (DOUBLE ARM) 1880KG, 120KG (GLASS CARRIER) (10) X NACHI SC-400LC YEAR 2006 400KG (DOUBLE ARM) 1880KG, 120KG (GLASS CARRIER) 3 SPARES (4) X NACHI VS-6577E YEAR 2006 5KG (SINGLE ARM) 29KG, 5KG, ASSEMBLE USING FOR LABEL (293 PCS) X SPARE PARTS (INCLUDING 3 MODELS) (103 KINDS) THESE ROBOTS ARE ALMOST BRAND NEW Learn More

INVENTORY NUMBER: E-2891 CAROUSEL FOAM CUTTER (BUILT IN CHINA) THREE MODELS AVAILABLE. MODEL YP-60 MODEL YP-73 MODEL YP-100 QUANTITY AVAILABLE: 3 Learn More