Search results for: '500-15%'

REFERENCE NUMBER: M-4835 (1111VEHJXX10) L POWER AND INDUSTRIAL PLANTS FOR SALE QTY. OUTPUT (MW) DESCRIPTION MANUFACTURER/ TYPE BUILT/ CONDITION 1 230 COMBINED CYCLE GAS TURBINE POWER PLANT SIEMENS V94-2 1988 1 220 COMBINED CYCLE POWER PLANT 50 HZ, FUEL: DUAL FUEL (NATURAL GAS OR HFO/DIESEL) GE FRAME 6B CCPP 1992, RUNNING HOURS: 135 000, PREUSED 1 180 GAS TURBINE 125 MW, STEAM TURBINE 55 MW, 50 HZ, FUEL LFO AND NG GE FRAME 9E CCPP 2005, RUNNING HOURS: 2000 2 128 COMPLETE POWER PLANTS, 15 KV, FUEL: NATURAL GAS AND LIGHT OIL GE FRAME PG9171E NEW 2 127 GAS TURBINE PACKAGES FIAT AVIO MODEL TG 50 – D5 1998,DISMANTLED, OVERHAULED, UPGRADED FROM SIEMENS AND DISMANTLED 2 125 COMPLETE PLANT, 2 UNITS ABB GAS TURBINE PACKAGES, FUEL: DUAL FUEL, 50 HZ ABB, 50WT 18H-66 1995, JUST OVERHAULED, WARRANTY POSSIBLE 1 93 COMBINED CYCLE POWER PLANT. FUEL : NATURAL GAS GE FRAME 6FA 1997 MAJOR INSPECTION IN 2009 1 73 COMBINED CYCLE POWER PLANT. FUEL: NATURAL GAS. 50 HZ. SIEMENS WESTINGHOUSE AND MITSUBISHI. 1999, RUNNING HOURS 97 000 1 70 COMBINED CYCLE POWER PLANT THOMASSEN/ABB 2009, RUNNING HOURS UNDER 90 000 CONDITION GOOD, 2009 OVERHAULED 5 66 GAS TURBINE PACKAGES, 50 OR 60 HZ ROLLS ROYCE, TRENT 60 2014, RUNNING HOURS ZERO 3 49 GAS TURBINE POWER PLANT, 50 HZ 3 UNITS GE LM 6000 PC 2004, RUNNING HOURS 6000 QTY. OUTPUT (MW) DESCRIPTION MANUFACTURER/ TYPE BUILT/ CONDITION 1 46 COMPLETE PLANT, INCLUDES 5 GAS TURBINE PACKAGES, INCLUDING 1 STEAM TURBINE, BOILER AND AUXILIARIES. FUEL: NATURAL GAS AND NAPHTA. 50 HZ. SIEMENS TYPHOON AND ALSTOM. 2000, LOW HOURS, STILL IN OPERATION 1 42 COMBINED CYCLE POWER PLANT. FUEL: NATURAL GAS. 50 HZ. GE LM 6000PA 1997, LAST HOT END OVERHAUL WAS AT 86.080 HOURS IN AUG 2010 1 41 GAS TURBINE PACKAGE WITH HRSG, 50HZ FUEL: NATURAL GAS/FUEL OIL THOMASSEN PG-6541 1995, LAST OVERHAUL AT 118350 1 40 COMBINED CYCLE POWER PLANT. FUEL: NATURAL GAS AND LIGHT OIL. 50 HZ. GE FRAME 6 B, DRY LOW NOX 1992, RECENTLY OVERHAULED, STILL GOOD FOR MORE THAN 24.000 RUNNING HOURS. READY TO SHIP. 5 37 GAS TURBINE PACKAGES, DUAL FUEL, 50/60 HZ SGT 750 SIEMENS NEW, ZERO HOURS 1 31,2 GAS TURBINE PACKAGES, 31,2 MW , 50/60 HZ, SGT 700 NEW, ZERO HOURS 5 31 GAS TURBINE PACKAGES, DUAL FUEL, 50/60 HZ GE TM2500 NEW 1 29,65 GAS TURBINE GENERATOR, 50 HZ, 11 KV SGT 700 2011, RUNNING HOURS ZERO (NEW) 1 27 COMBINED CYLE POWER PLANT, 27 MW, NATURAL GAS GE RLM 2500 PE AND ALSTOM STEAM TURBINE GAS TURBINE 1994, STEAM TURBINE 1996 1 26,59 GAS TURBINE, FUEL: GAS FRAME 5, PG-5371 PA 1995, RUNNING HOURS 174,104 4 24,6 CORE ENGINE FUEL: NATURAL GAS, 50 HZ SIEMENS SGT 600 (EX ABB GT 10B) 1994-1997, ZERO HOUR OVERHAULED 1 16 GAS TURBINE PACKAGE DUEAL FUEL ROLLS ROYCE AVON 1534-102L ZERO HOUR OVERHAULED IN 2008 1 14,25 NATURAL GAS ENGINE SOLAR TITAN 130 SOLONOX, 50 HZ TURBOMACH T19501 2007, ZERO RUNNING HOURS, AS NEW 3 12,9 GAS TURBINES SIEMENS, 60 HZ SIEMENS SGT 400 2014, NEW NEVER USED 1 11,86 GAS TURBINE, 60 HZ SOLAR MARS 100 15000 SOLONOX 1996, RUNNING HOURS 34 000 SINCE LAST OVERHAUL 2 9,2 CHP PLANT ELECTRIC, NATURAL GAS AND LIGHT DIESEL&BOTH SOLAR CENTAUR 50 T5701 2005 AND 2008, RUNNING HOURS 26 000 AND 2 500 1 8,8 COMBINED CYCLE GAS TURBINE POWER PLANT. 60 HZ. SOLAR MARS 90. 1989, LAST MAJOR OVERHAUL IN 2004, ONLY 1225 RUNNING HOURS 1 7,5 NATURAL GAS ENGINE SOLAR TAURUS T70, 50 HZ TURBOMACH SOLONOX + WHRB 2007, ZERO RUNNING HOURS AS NEW 1 5,5 GAS TURBINE, 50 HZ, NATURAL GAS SGT 200 1989, RUNNING HOURS 126 340 QTY. OUTPUT (MW) DESCRIPTION MANUFACTURER/ TYPE BUILT/ CONDITION 1 5,2 DUAL NATURAL GAS AND OIL ENGINE TAURUS 60, 50 HZ SOLAR TAURUS 60, SOLONOX T7301 1998, RUNNING HOURS17 700 1 1,4 GAS TURBINE PACKAGE INCL. HRSG, 50 HZ KAWASAKI KA 1334 1995, RUNNING HOURS AFTER MAJOR OVERHAUL 4000 Learn More

REFERENCE NUMBER: M-4690 (11111B176Y10UF) L FULL AUTOMATIC SINGLE HEAD CHOCOLATE PRODUCTION LINE TOTAL ELECTRIC POWER: 21KW AIR COMPRESSOR: CONSUMPTION: 0.22M3/MIN, PRESSURE: 0.7MPA WORKING CNDITION: TEMPERATURE: 20 TO 25°C CHOCOLATE WEIGHT: PURE CHOCOLATE: 2.5 TO 512 G, CENTRE FILLED CHOCOLATE: 15 TO 40G TOTAL MACHINE WEIGHT: 5,250KGS TOTAL MACHINE SIZE: 16.7 x 1.21 x 2.5 M MOULD SIZE: 280 x 200 x 30mm AND 300 x 225 x 30mm THE FOOD CONTACT SPARE PARTS ARE ALL PLATED WITH NICKEL. DOUGH HOPPER INSIDE SURFACE IS MADE OF STAINLESS STEEL 304, BEAUTIFUL AND CLEAN. TO MEET THE STANDARD OF FOOD STANDARD. COCOA BUTTER MELTING TANK (1SET) SUGAR GRINDING MACHINE (1SET) 500L CHOCOLATE CONCH (REFINER) (2SET) 500L CHOCOLATE HOLDING TANK (2SET) QH320 CHOCOLATE SYRUP PUMP (2SET) QH25CHOCOLATE SYRUP PUMP (2SET) QH-I SINGLE HEAD CHOCOLATE DEPOSITING AND COOLING TUNNEL (1SET) CHOCOLATE MOULDS (280PCS) CONTROL PANEL BOX (1PCS) OTHER OPTIONAL EQUIPMENTS: (CHOOSE WHEN USE NATURAL COCOA BUTTER) 250KG CHOCOLATE TEMPERING MACHINE 1SET QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-2990 AV501 FOAM SHREDDER (NEW) FOR SALE: DIMENSIONS 1020 X 800 X 1550MM WORKING CAPACITY 30 KG/H POWER 4 KW WEIGHT 120 KG SUITABLE FOR SHREDDING FOAM WASTES TO ARTICLES OF DESIRED SIZE. THE SIZE OF THE FOAM ARTICLES CAN BE ALTERED BY CHANGING THE DIAMETERS OF THE MESH SIZE. AVAILABLE MESH HOLD DIAMETERS AS FOLLOWS: Ø 15MM, Ø 20MM, Ø 25MM, Ø 30MM, Ø 35MM. ONLY ONE OF THEM IS PROVIDED IF NOT REQUESTED. AN ADDITIONAL ONE IS ON THE CUSTOMER’S REQUEST. THE SHREDDING PART CAN BE MAINTAINED AND CHANGED WITH EASE. THERE ARE SEVERAL SERIES OF THE EQUIPMENT FOR CHOICE. PRICE: US$ 4,500.00 QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-6265-A COMPLETE FOAM PLANT FOR ROUND LOGS AND PEELER PROCESSING ONLY FOR SALE: FOAM MAKING MACHINE FOAM BLOCK FORMING MACHINE MODEL F-3# WITH AUTOMATIC HYDRAULIC BOX LIFTING BY 4 HYDRAULIC CYLINDERS QUANTITY: 1 PEELER FOAM PEELER CUTTING SIZE: 2000 MM X 2150 MM DIAMETER CUTTING THICKNESS: 2 - 25 MM CUTTER BAND TOTAL LENGHT: 8640 MM TURNING SPEED: 35 M - 30 M/MIN POWER: 4.69 KW MACHINE WEIGHT: 1800 KG MACHINE EXTERNAL SIZE: W 1650 X L 4750 X H 1678 MM QUANTITY: 1 GRINDING MACHINE FOAM GRINDER (CRUSHING) MACHINE MODEL: HSFS-22 BREAKING SPEED: 100 - 200 KG/HOUR BREAKING PARTICULATE MIN: 3 MM - 20 MM MOTOR POWER: 22 KW SCREEN: 3 PCS (8 MM - 18 MM - 30 MM) FAN: 4 KW MACHINE WEIGHT: 1500 KG MACHINE SIZE: W 1100 MM X L 2900 MM X H 1000 MM QUANTITY: 1 ROUND BLOCK MOLD ROUND FOAM MOLD: ROUND MOLD TO FEED PEELER MACHINE MODEL Y-1# QUANTITY: 2 HORIZONTAL ROUND BLOCK BORING MACHINE FULL SET OF SPARE PARTS ESTIMATED NEEDED FOR 1 YEAR FULL SET OF MECHANICAL AND ELECTRICAL DIAGRAMS PLANT BLOCK PRODUCTION: 24 TO 40- BLOCKS/8 HR SHIFT FLOORSPACE REQUIREMENTS: 5000 SQ FT FOR MACHINERY (RAW MATERIAL AND FINISHED PRODUCT NOT INCLUDED IN THIS FIGURE) QUANTITY: 1 QUANTITY AVAILABLE: 6 Learn More

REFERENCE NUMBER: J-1123 (1212KJNMXX11) NONWOVEN LINE EXIT WIDTH 2500mm MIXING/BLEND UNIT CONSIDER 1 3- COMPONENTS MIXING UNIT 1500 KG/H WITH FEET TABLE 1 MIXING CHAMBER/ MIXMASTER FÖRDERVENTLATOREN 1 CARDING WILLOW WORKING WIDTH 1700 MM CHUTE FEEDER VIBRITING UNIT BELT WEIGHTER 1 PCS. DOUBLE DOFFER CARD FOR TYP DF 680 WORKING WIDTH 2500 MM 6 ROLLER DRAWING-IN VOLANT EXIST (BUT NOT IN US, BECAUSE NOT FOR MAN-MADE FIBERS) RIM VENTILATION UPPER DOFFER WITH RANDOM DOWN DOFFER WITH TAKE-OFF ROLL ALL ELECTRIC DRIVES ARE FULL SYNCHRONIZES WITH THE MAIN DRIVERS OF THE NEEDLE PUNCH UNIT 1 PCS. TECHNOPLANTS CROSS-LAPPER TYP 2555. OC INPUT: 2`500 MM OUTPUT: 5700 MM SPEED: 80 M/MIN PROFILING UNIT 1 PCS. TECHNOPLANTS PRE-NEEDLEPUNCHE UNIT TYP PRN.50.DU.55 F WORKING WIDTH 5500 MM WITH FINGER- DRAWING-IN SYSTEM, TYP FG.5500 (CBF) 5000 NEEDLE/ METER UP 5000 NEEDLE / METER DOWN TOTAL 10'000 NEEDLE/ METER UP AND DOWN MAXI. STORKE FREQUENZ: 1200 U/MIN. STORKE HIGHT: 70 MM ENTRY SPEED. 1,2 UP TO 12 M/MIN. 1 PCS. FINISHING-NEEDLEPUNCH DILO OUG II 55 WORKING WIDTH: 5500 MM NEEDLE UP AND DOWN: 8000 + 8000 PRO LFM. TOTAL 16'000 NEEDLE 4 BOARDS MAXI STORKE FREQENZE.: 1200 U/MIN STORKE HIGHT: 60 MM ENTRY SPEED : 1,2 UP TO 12 M/MIN 1 PCS SPACER 1 PCS. LONGITUDINAL- UND CROSS CUTTING, MOD. LTC. CC-RB STAINLESS STEEL , DIAMETER 300 MM, UP TO 6 –KNIVES 1 PCS. WINDING, MODELL WM.55.M INCLUDING WEIGHING MACHINE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3009

ATLANTA ATT 3300R AUTOMATIC BORDER MEASURE,  SEW AND HANDLE ATTACHING MACHINE WITH LABEL GOVERNMENT LABEL ATTACHING

 

BAND AND HEALTH MACHINE

8 POSITIONS TO PUT THE SPOOLS WITH THE HANDLE MATERIALS.

AUTOMATIC HANDLE TACKER, BORDER MEASURE, INSERT LAW LABEL AND CLOSE WORKSTATION

BRAND: ATLANTA ATTACHMENT

MODEL: 3300R

IT CAN PUT MATERIAL STYLE HANDLERS ON AUTOMATICALLY

THE FOLLOWING HEADS ARE ON THIS UNIT: MITSUBISHI PLKE 1010, LS2-1380 AND 1959Y28B

THIS MACHINE IS MADE OF (3) SEWING HEADS

(A) MITSUBISHI PLKE 1010

(B) LS2-1380

(C) 1959Y28B

THE FIRST TWO MACHINES MODEL: 3300R

THE LAST MACHINE’S MODEL: 1959Y28B

 

THE MACHINE HAS AT THE BEGINNING A SHAFT WITH 8 PLASTIC ROLLERS THAT ALLOW THE PULLING OF THE BORDER FORWARD

 

MEASURES BORDER, SETS HANDLE (4 OR 8), MEASURE, CUTS AND CLOSES BORDER

ACCOMODATES 8 ROLLS OF HANDLE FOR QUICK CHANGEOVER

AUTOMATICALLY DETECTS AND CUTS OUT SPLICES AND DEFECTS

LOCKSTITCH SEWING HEAD FOR CLOSING BORDER WITH NEEDLE POSITIONER, AUTOMATIC THREAD TRIMMER & PRESSER FOOTLIFT

FEEDS PRE-MADE HANDLES FROM ROLL

CAPACITY UP TO 15" BORDERS

STORES UP TO 22 STYLES

PROGRAMMABLE BOX "X" TACKER

SERIAL BUS CONTROL SYSTEM WITH TOUCH SCREEN UNCONDITIONALLY GUARANTEED THREE YEARS

SELF-DISGNOSTIC SOFTWARE

HEAVY-DUTY GUILLOTINE CUTTER WITH TEMPERED BLADES

HEAVY-DUTY FEEDING MODULE WITH URETHANE ROLLER

 

MAX SEWING SPEED (RPM):       CLOSER-5000                      TACKER-2300

FACTORY PRESET SPEED (RPM):                 CLOSER-1800                      TACKER-1500

MAX STITCH LENGTH (SPI):          CLOSER-6                            TACKER-8

NEEDLE SYSTEM:                              CLOSER-SNDLX1140        TACKER-SN135X1722

NEEDLE SIZE:                                      CLOSER-22 to 140             TACKER-22 to 140

WEIGHT OF MATERIAL:                 CLOSER & TACKER-MEDIUM

VOLTAGE (V/PH/HZ):                     CLOSER & TACKER- 22V 1PH 60HZ

CURRENT (AMPS):                           CLOSER & TACKER- 5

MOTOR TYPE:                                    CLOSER & TACKER- EFKA DC

AIR PRESSURE (PSI):                       CLOSER & TACKER- 80

AIR CONSUMPTION (CFM):         CLOSER & TACKER- 6

SHIPPING WEIGHT (LBS):              CLOSER & TACKER- 2250

SHIPPING DIMENSIONS:                               CLOSER & TACKER- 65 x 110 x 88

 

DESCRIPTION FROM WEB PAGE MAY NOT FIT MACHINE DESCRIPTION EXACTLY

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4735 (111121CVL10RX) L AUTOMATIC SPRING POCKET ROLLING MACHINE AUTOMATIC SPRING POCKET ROLLING MACHINE MODEL JB-15P ROLL-PACKING BED CORE SPECIFICATION: LOW THAN 2000mm(W) x 200mm(H) ROLL-PACKING QUANTITY EACH TIME: LESS THAN 10 PCS ROLL-PACKING DIAMETER: ABOUT 500mm ROLLING-IN SPEED: 10 R/MIN ROLL-PACKING SPEED: 8 ROLLS/HR POWER: 6KW AIR SOURCE PRESSURE: 0.5-0.6 MPA CREATED AND AMENDED DATE: 13-10-2012 3 PHASE, 50HZ, 380V/400V (OR TO BE ADVISED) THE MACHINE IS MAINLY USED TO WRAP AND COMPRESS THE SPRING BED CORES (OR SOFA CUSHIONS) SO AS TO REDUCE TRANSPORT COST QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4566 (1111225RSJ10U) L THERMOPLASTIC HOTMELT COATING LINE MP ENGINEERING TYPE HM59-SD3 YEAR 2005 WIDTH 102” (2590mm) YEAR: 2005 TYPE: HM59-SD3 MATR: 404/04 ROLL FACE: 2600mm (102”) WORKING WIDTH: 2400mm (95”) VOLTAGE: 480/3/60 CONTROL VOLTAGE: 110/60 CONSISTING OF: CAROUSEL 3 POSITION LET-OFF, ENTRY ON ACCUMULATOR WITH HOT-WIRE SEAMING DEVICE, 8000 VOLT STATIC ELIMINATOR, PNEUMATICALLY OPERATED FABRIC HOLDING DEVICE FOR TENSION CONTROL, ACCUMULATOR WITH 8-ROLLS UP AND 9-ROLLS DOWN APPROX.. 80-YARD CAPACITY, COMPENSATING ARM ON EXIT SIDE. ROLLS ARE 4” DIA. X 102” FACE ALUMINUM, CONTROL PANEL MOUNTED ONTO FRAMEWORK, FULLY ENCLOSED CAGE. SECOND ACCUMULATOR WITH ROLL CRADLE FOR SECOND SUBSTRATE LET-OFF, ACCUMULATOR WITH 9-ROLLS UP AND 10 ROLLS DOWN, APPROX.. 54 YARD CAPACITY, ROLLS ARE 4’ DIA. X 102” FACE ALUMINUM, INCLUDES 8000 VOLT STATIC ELIMINATOR AND PNEUMATIC FABRIC HOLDING FOR TENSION, PENDULUM TYPE GUIDING DEVICE ON EXIT SIDE, CONTROL PANEL MOUNTED ONTO FRAMEWORK, FULLY ENCLOSED CAGE. OVERHEAD GANTRY WITH ACCESS STAIRS ON RIGHT SIDE OF FIRST ACCUMULATOR, EXTENDS OVER THE EXTRUDER WITH JIB MOUNTED FOR EASE IN REMOVING DIE FROM MACHINE, GUIDING/CENTERING DEVICE MOUNTED ONTO GANTRY FEEDING COATING HEAD. MP ENGINEERING EXTRUDER/APPLICATOR TYPE HM59-SD3, MATR. NO. 402/04, WITH 102” DIE, 98” RUBBER-BELT WITH PNEUMATIC CYLINDERS FOR BELT TENSION AND GUIDING, HEATED CYLINDER BACKING TO DIE, OPERATOR PLATFORM, CONTROLS MOUTNED IN DOOR AND OPERATOR TOUCH SCREEN PANEL. (NOTE: THESE ARE PRESENTLY MOUNTED ON PRODUCTION LINE AND WILL BE REMOVED AND PLACED BACK INTO/ONTO APPLICATOR. 480/3/60 COATEM SISTEMI C.R.L. IMBALLAGIO & HOT MELT EXTRUDER, S/N 50701, TYPE/MODEL CE-200, WITH DIGITAL MICROPROCESSOR AND INVERTER FOR SPEED VARIATION, DESIGNED TO WORK MAINLY WITH POLYESTER, POLYAMIDE AND POLYURETHANE BUT CAN ALSO EXTRUDE ABS, POLYTHENE, POLYPROPYLENE AND ADHESIVES LIKE EVA ADHESIVES. 480/3/60 CONAIR DRYER CD-300, PL-D-196-1, MODEL D03H4101310, S/N 9D0597, 480/3/60, AND HOPPER. THIRD ACCUMULATOR FOR BONDED PRODUCT WITH 6-ROLLS UP AND 7-ROLLS DOWN, APPROX…60-YARD CAPACITY, ROLLS ARE 6” DIA. X 102” FACE ALUMINUM, WITH DRAW-ROLL TENSION DEVICE MOUNTED ONTO EXIT, OVERHEAD CARRIER ROLLS AND FRAMEWORK DELIVERY TO ELECTRIC A-FRAME WINDER WITH 102” FACE LAY-ON ROLL, AND SEMI-AUTOMATIC BATCHER FOR INDIVIDUAL ROLLS, 2-ROLL SURFACE WINDING 102” FACE WIDTH, OVERHEAD CORE FEED, FABRIC CENTERING DEVICE, ELECTRIC SCISSOR CUT-OFF, KICK-OUT TO 2-ROLL BED, OPERATOR PLATFORM AND OPERATOR CONTROLS. ALL MACHINES PRODUCED BY MP CONFORMS TO EEC DIRECTORY 89/392 CEE (CE MARK) TECHNICAL FEATURES OF THE LINE, ACCORDING TO DWG 100-904/1C ROLLERS WIDTH 2600mm WORKING WIDTH 2400mm MAXIMUM DIAMTER OF THE ROLLS OF PU FOAM 1500mm MAXIMUM DIAMETER OF THE UNWOUND ROLLS OF FABRIC 600 ° 1500 MAXIMUM DIAMETER OF THE REWOUND ROLLS 500 ° 1500 (IN CASE YOU ARE REWINDING ROLLS OF FABRIC LAMINATED TO PU FOAM, THE MAXIMUM DIAMETER IS 1750mm) ADJUSTABLE MECHANIC SPEED: 5 TO 50 M/MIN MAIN POWER SUPPLY + NEUTRAL + EARTH 480+N+E/60 V/HZ VOLTAGE ON CONTROL PANELS 110/60 V/HZ INSTALLED POWER FOR MOTORS 22KW INSTALLED POWER FOR IR HEATER 14,25KW INSTALLED POWER TO HEAT THE SLOT-DIE 32KW INSTALLED POWER FOR THE THERMAL OIL HEATING UNIT FOR THE CALENDERING ROLLERS 32,2KW INSTALLED POWER FOR THE CHILLER 12,9KW A.C. MOTORS, DRIVER, ELECTRIC CABLES ARE ACCORDING TO CEI NORMS BACKGEAR ROLLERS, WITH PAINTED SURFACE OR ALUMINUM MADE WITH DIAMETER 100/120/150mm COMPRESSED AIR CONSUMPTION, AT 6 BAR 1500LT/H COOLING WATER CONSUMPTION (WATER MUST HAVE A TEMPERATURE NOT HIGHER THAN 10°C) 5500LT/H ADJUSTABLE TENSION ON THE REWOUND MATERIALS 5 A 35 KG. PAINTING GREEN RAL 6027 E BLUE MARINE RAL 5021 A.C. MOTORS CONTROL THE SPEED OF THE MACHINES, AND ARE AUTOMATICALLY SYNCHRONISED THROUGH ELECTRONIC DRIVES (INVERTER) AND PNEUMATIC DANCER UNITS (COMPENSTAORS) ESTRUDER: CAPACITY UP TO 200 KG/H (DEPENDING ON THE VISCOSITY OF THE ADHESIVE TO BE EXTRUDED) POWER OF THE MOTOR AND RESISTANCES: 90KW MAXIMUM MELTING TEMPERATURE: 220°C MATERIALS TO BE PROCESSED NONWOVENS 30:150 GR/M2 SYNTHETIC AND NATURAL FABRICS (EXCLUDING STRETCHY FABRICS) WITH WEIGHT 100:600 GR/M2 SCRIMS FOR BACKING FABRIC WITH WEIGHT 70:120 G/M2 MAXIMUM THICKNESS OF PU FOAM 15mm MINIMUM THICKNESS OF PU FOAM 2mm DENSITY OF PU FOAM 22/40 KG/M3 THERMOPLASTIC ADHESIVE TO BE COATED THERMOPLASTIC HOTMELTS (COPOLYAMMIDE, COPOLYESTER, EVA AND POLYURETHANE THERMOPLASTIC HOTMELT GRANULES) DATA REFERRING TO PRODUCTION THE PRODUCTION SPEED CAN CHANGE, DEPENDING ON THE KIND OF HOTMELTS, ON THEIR MELTING TEMPERATURE, ON THEIR VISCOSITY, AND ON THE GRAMS PER SQUARED METER TO BE COATED QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4755 (111195DBJ10RL) L BABCOCK STENTER YEAR 1991 WIDTH 2000mm – 8 CHAMBERS (1) X BABCOCK STENTER – 5000 – 5800 TYPE YEAR 1991 8 CHAMBERS (TOTAL LENGTH OF THE DRYING TUNNEL MT. 24 WORKING WIDTH 2000mm BLOWERS MODEL JET-STAR WITH AIR CIRCUIT CIRCULATION TYPE ECON-AIR POSSIBILITY TO ADJUST AIR FLOW INDEPENDENTLY UPPER AND BELOW GAS HEATING SYSTEM HORIZONTAL PIN CHAIN CONICAL INPUT FIELD LENGTH MT. 3.5 TOTAL OVERFEEDING FOR NEEDLE CHAIN (+50%) ENTRY WITH E+L CONICAL FIELD REGULATOR MODEL KR-40 WITH FR1501 PHOTOCELL FEELER GROUP BIG ROLL ARM DEVICE FOR FABRIC OUTPUT ON A-FRAME TROLLEYS SPEED ADJUSTABLE FROM 7.5 TO 150 MT/MIN MACHINE IS PROVIDED OF: (1) X BABCOCK IMPREGNATING/SQUEEZING PADDER – 5805 TYPE 2 CYLINDERS WITH ROLLER WIDTH 2000mm (WORKING WIDTH 1850mm) STAINLESS STEEL IMPREGNATING THROUGH - 2 STAINLESS STEEL EXTERNAL TANKS WITH MIXER D.C. DRIVE WITH SYNCHRONIZATION (1) X MAHLO WEFT STRAIGHTENER RFMC TYPE – 4 OPTICAL HEADS (1) X VACUUM EXTRACTOR WITH FILTER AND WATER RECOVERY – VACUUM PUMP WITH 30HP POWER – TO EXTRACT WATER FROM DELICATE FABRIC BYPASSING THE SQUEEZING PADDER QUANTITY AVAILABLE: 1 Learn More

COMPUTER SHUTTLE LOCK STITCH MULTI-NEEDLE QUILTING MACHINE Learn More