Search results for: 'gas po'

REFERENCE NUMBER: P-8845 FULLY AUTOMATIC MASK MACHINE THIS EQUIPMENT IS A FULL-AUTOMATIC ONE-TIME PLANE MASK FORMING MACHINE, WHICH IS USED FOR THE FORMING OF ONE-TIME RECTANGULAR EAR HANGING THREE DRAWER MASKS. ONE MAIN MACHINE IS EQUIPPED WITH TWO EAR BELT SPOT WELDING MACHINES (ONE FOR TWO). THE DRIVING MOTOR IS SERVO MOTOR, SO IT HAS THE ADVANTAGES OF HIGH RELIABILITY, EASY OPERATION, ACCURATE TRANSMISSION, STABLE CONTROL, ADJUSTABLE SPEED, LOW COST AND CONVENIENT MAINTENANCE, ESPECIALLY SUITABLE FOR THE PRODUCTION OF HIGH-QUALITY MASKS. SPECIFICATIONS TEMPERATURE: 10 TO 350, HUMIDITY 5 TO 35%, NO FLAMMABILITY AND NONCORROSIVE GAS VOLTAGE: 220V POWER FREQUENCY: 50Hz PER 60Hz TOTAL POWER OF EQUIPMENT: 8.5KW ULTRASONIC FREQUENCY: 5 TO 20KHz MAX FEEDING WITH OVERALL DIMENSION OF EQUIPMENT: 6100 x 3300 x 1800 MACHINE WEIGHT: 2 TONS PRODUCTION EFFICIENCY: 80 TO 120 TABLETS PER MIN (EACH WORKING STATION 60 PCS PER MIN, AS WE HAVE TWO WORKING STATION). OPERATOR: 1 PERSON QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6550

MEDICAL PROTECTIVE CLOTHING BLOOD SYNTHETIC PENETRABILITY TESTER

 

TECHNICAL SPECIFICATIONS AND CONFIGURATION:

1. THE INSTRUMENT ADOPTS AN AIR SOURCE THAT CAN PROVIDE (0.5 ~ 30±0.1) KPA PRESSURE TO CONTINUOUSLY PRESSURIZED THE SAMPLE, WHICH IS NOT RESTRICTED BY THE SPACE OF THE TEST SITE;

2. THE AIR PRESSURE RANGE CAN BE ADJUSTED FREELY, AND THE ADJUSTMENT RANGE (0.5 ~ 30) KPA;

3. COLOR TOUCH SCREEN DISPLAY AND OPERATION;

4. THE SAMPLE CLAMPING PAD IS PROCESSED WITH IMPORTED SPECIAL ALUMINUM PROFILES, WHICH IS LIGHT IN MATERIAL, CLEAN IN SURFACE AND NEVER RUSTS.

5. THE INSTRUMENT ADOPTS IMPORTED SPECIAL ALUMINUM WIRE DRAWING PANEL, EQUIPPED WITH METAL KEYS, SENSITIVE OPERATION, NOT EASY TO DAMAGE;

6. CLAMPING DEVICE FOR INSTRUMENT SAMPLES, EQUIPPED WITH LOCKING PROTECTION, TO PREVENT THE SYNTHETIC BLOOD FROM SPLASHING AROUND;

7. CLAMPING FORCE IS ACCURATE AND RELIABLE;

8. THE TEST TANK IS EQUIPPED WITH A SPECIAL PLACEMENT DEVICE, WHICH IS CONVENIENT FOR CUSTOMERS TO OPERATE;

9. THE TEST TANK IS PROCESSED WITH SPECIAL 316 STAINLESS STEEL, AND THE TOP IS EQUIPPED WITH A SPECIAL COVER FOR HIGH TRANSPARENT PROTECTION;

10. THE WASHER BELOW THE SAMPLE IS MADE OF HIGH-QUALITY PTFE MATERIAL AFTER SPECIAL PROCESSING;

11. SQUARE METAL BLOCK NET: OPEN SPACE ≥50°%; BENDING ≤5mm AT 30KPA;

12. INSTRUMENT TIME CONTROL ACCURACY ≤01 SECONDS;

13. THE SHELL OF THE INSTRUMENT IS MADE OF HIGH-QUALITY METAL BAKING PAINT, WHICH IS BEAUTIFUL AND GENEROUS.

14. EQUIPPED WITH PRINTER INTERFACE, CONNECTED TO THE PRINTER CAN DIRECTLY PRINT DATA REPORTS.

 

TECHNICAL PARAMETERS:

1. SAMPLE SIZE: 75mm X 75mm

2. TEST AREA: 28.26 SQUARE CENTIMETERS

3. AIR PRESSURE ADJUSTMENT RANGE (0.5 ~ 30) KPA

4. EXTERNAL SIZE: 500mm X 500mm X 500mm (L X W X H)

5. WEIGHT OF THE INSTRUMENT: 40 KG

6. POWER SUPPLY: AC220V, 50HZ,SCOPE OF SUPPLY: 1. ONE MAIN MACHINE; 2. TWO PTFE GASKETS; 3. TWO ORDINARY WASHERS; 4. ONE METAL BLOCKING NET; 5. A SET OF SPECIAL LOCKING TOOLS; 6. ONE HIGH-QUALITY SILENT AIR PUMP, [NOTE: SAFETY PRODUCTION LICENSE IS NOT INCLUDED]. 7. EQUIPPED WITH PRINTER INTERFACE; 8. ONE SAMPLE TEMPLATE; 9. ONE PRODUCT CERTIFICATE; 10. ONE COPY OF PRODUCT OPERATION MANUAL.

 

OPERATION INSTRUCTION:

INSERT THE AIR PUMP OUTPUT PIPE INTO THE OIL AND WATER SEPARATOR OF THE INSTRUMENT AS REQUIRED (PRESSURE 0.1-0.3MPA).

AFTER SWITCHING ON THE POWER, THE STARTUP INTERFACE (NAME OF THE DEVICE) IS DISPLAYED.

PRESS THE "ENTER" BUTTON TO ENTER THE TEST INTERFACE, AS SHOWN IN THE FOLLOWING FIGURE:

CLICK "SETTING” BUTTON, GET INTO PARAMETER SETTING SCREEN, AS BELOW THIS SCREEN CAN SET THE SYSTEM TIME, DATE AND TESTING TIME, AFTER SETTING, CLICK "SAVE” BUTTON TO KEEP THE SETTING DATA. (NOTE: IT REQUIRES 5 MINUTES IN THE STANDARD)

 

QUANTITY: 1

Learn More

L-4532 DATGEN ROASTERS

MODELS AVAILABLE: DR 1, 3, 5, 12, 25, & 35

MODEL DR-1
CAPACITY: 0.5 TO 1.25 KGS

MODEL DR-3
CAPACITY: 0.1 KGS TO 2.5 KGS
HOURLY ROAST OUTPUT: 10 KGS
VOLTAGE: 230 VOLTS @ 60 Hz OR 400 VOLTS @ 50 Hz
40,000 BTU, 26.2 KW
FUEL: PROPANE OR NATURAL GAS
ROASTER WEIGHT: 100 KGS
ROASTER DIMENSIONS: 1400mm TALL X 1200mm LONG X 1100mm WIDE
EXHAUST PIPE DIAMETER: 130mm
COMPUTER CONNECTION: RS 485
DRIVE: 4 MOTORS
MOTOR POWER: 1 KW PER HOUR

MODEL DR-5
CAPACITY: 0.5 KGS TO 5 KGS
HOURLY ROAST OUTPUT: 15 KGS
VOLTAGE: 230 VOLTS @ 60 Hz OR 400 VOLTS @ 50 Hz
90,000 BTU, 26.2 KW
FUEL: PROPANE OR NATURAL GAS
ROASTER WEIGHT: 300 KGS
DIMENSIONS: 1470mm TALL x 1750mm LONG X 1140mm WIDE
EXHAUST PIPE DIAMETER: 150mm
DRIVE: 4 MOTORS
MOTOR POWER: 2 KW PER HOUR

MODEL: DR-12
CAPACITY: 0.5 TO 12 KGS PER BATCH (MAX 15 KGS OF GREEN BEANS)
OPERATING TIME: 5 TO 18 MINUTES PER BATCH, DEPENDING ON ROASTING PROFILES
ROASTER DIMENSIONS: 1160mm WIDE X 1430mm LONG X 1800mm TALL
WEIGHT: 410 KGS
POWER: 230 VOLTS @ 60 Hz OR 400 VOLTS @ 50 Hz
FUEL: PROPANE OR NATURAL GAS
GAS PRESSURE: NATURAL GAS ABOVE 2 KPA / PROPANE ABOVE 2.9 KPA
90,000 BTU PER HOUR
EXHAUST PIPE DIAMETER: 150mm
ROAST AIR SCFM/SCMH: 380 SCFM / 650 SCMH

MODEL: DR-30
CAPACITY: 2.5 TO 37.5 KGS

MODEL: DR-60
CAPACITY: 2.5 TO 75 KGS

 

Learn More

R-3244 JABEZ BURNS ELECTRIC USED 2 BARREL SAMPLE ROASTER

27" TALL X 15" WIDE X 30" DEEP
6 TO 20 OUNCES OF GREEN PER CYLINDER
122 POUNDS IN WEIGHT PLUS CRATING
ALLOW FOR 200 POUNDS SHIPPING
4" EXHAUST PIPE TO THE OUTSIDE WORLD
220 ELECTRIC SINGLE PHASE
RUNS REALLY GREAT
THIS IS A ONE-OWNER MACHINE - AND IS NO LONGER IN USE DUE TO MOVING TO A NEW BUILDING AND SWITCHING TO A ONE BARREL UNIT - AS THEIR NEED WAS NOT SO GREAT
THIS IS SITTING IN STORAGE.
NOW, THIS IS HISTORY - AS THIS IS THE LAST MACHINE MADE BY JABEZ BURNS AND HAS LOTS OF SENTIMENTAL VALUE DUE TO THAT. PARTS ARE OFF THE SHELF AND EVEN THE HEATING ELEMENTS ARE STANDARD STOVETOP ELEMENTS AVAILABLE AT ANY APPLIANCE PARTS STORE. THE ONLY DOWNSIDE TO THIS ROASTER IS A LONGER HEAT-UP TIME OR WARM-UP THAN A GAS VERSION, BUT THE SMOOTH ROAST IS WHAT MATTERS. THE CHAFF COLLECTION DRAWER IS LOCATED UNDER THE MACHINE AND FRONT REMOVABLE.
SHIPS FROM MIDWEST AS IT IS IN A STORAGE UNIT.

QUANTITY: 1

Learn More

C-3990 HYUNDAI HIMSEN 9H25/33 HFO POWER PLANT, CAPACITY 10.5 MW, YEAR 2014 - NEW

MAKE/MODEL: HYUNDAI HIMSEN 9H25/33
HFO POWER PLANT
CAPACITY: 10.5 MW
WATTAGE: 46,200 KW
YEAR: 2014
HOURS: NEW
FUEL TYPE: HFO
FREQUENCY: 50 HZ
ENCLOSURE: SOUND ATTENUATED ENCLOSURE
MANUFACTURER: HHI
ENGINE MODEL: HYUNDAI HIMSEN 9H25/33
GENERATOR MODEL: HYUNDAI
FOR 50HZ: 2100KW, 6000V, 750 RPM

QUANTITY: 5

Learn More

REFERENCE NUMBER: M-5342 (220KYDTHH1) L USED SOCK MACHINERY FOR SALE Learn More

REFERENCE NUMBER: G-1385 AUTOMATIC CUTTING MACHINE MODEL BF45 RIGHT TABLE: 2200mm (86.6") LEFT TABLE: 2000mm (78.7") WORKING CUTTING LENGTH: 2350mm (92.5") WORKING CUTTING HEIGHT: 1300mm (51") QUANTITY AVAILABLE: 1 Learn More

TT-8645 OPEN WIDTH WASHING MACHINE FOR WOVEN FABRIC, WORKING WIDTH 1800mm, 5 WASHING CHAMBERS, 2 WASHING DRUMS IN EACH CHAMBER 1. OPEN WIDTH WASHING MACHINE FOR WOVEN FABRIC 2. WORKING WIDTH: 1800mm 3. 5 WASHING CHAMBERS 4. 2 WASHING DRUM IN EACH CHAMBER 5. DRIVING SIDE: (PLEASE SPECIFY) Learn More

TT-8339 DIGITAL OSCILLATING CUTTING MACHINE 1. MODEL: 1 DIGITAL KNIFE 5 X 8 FEET 2. MODEL: 2 DIGITAL KNIFE 4 X 4 FEET 3. 1 DIGITAL KNIFE CUTTING TABLE WITH OSCILLATING KNIFE AND VACUUM TABLE MACHINE 4. 2 DIGITAL KNIFE CUTTING TABLE WITH OSCILLATING KNIFE AND VACUUM TABLE MACHINE 5. OSCILLATING KNIFE: OSCILLATING KNIFE FOR CUTTING GASKET, FIBER, RUBBER, SILICONE, CARDBOARD, PAPERBOARD, CORRUGATED BOARD, FOAM, LEATHER, FOAM, PET FELT. ETC Learn More

TT-8316 FABRIC FLAME TEST CHAMBER, 45 DEGREES, SIZE 50mm X 150mm 1. STANDARD: 16 CFR 1610, ASTM D1230, CA TB117, GB/T 14644, JIS L1091 2. TEST CHAMBER: 370mm X 220mm X 350mm, TOP 12 VENTS WITH DIAMETER OF 12.7mm 3. SAMPLE FRAME: 45 ° QUANTITY: 1 Learn More