Search results for: 'Digital prin'

J-3004 FIBRILLATED RAFFIA TAPE EXTRUSION LINE – NEW, 120mm PP FIBRILLATED YARN EXTRUDER LINE MODEL: NOVASTAR-120 EXTRUSION LINE FOR PRODUCTION OF PP FIBRILLATED YARN RAW MATERIAL: PP GRANULE FINISHED PRODUCTS: NON-TWISTED TAPE YARN, FIBRILLATED YARN FOR TWINE RANGE OF PRODUCT: 10,000 TO 30,000 DENIER 10000 DENIER APPROXIMATELY 17 TO 19 YARN 16000 DENIER APPROXIMATELY 11 TO 12 YARN 22000 DENIER APPROXIMATELY 8 TO 9 YARN 28000 DENIER APPROXIMATELY 6 TO 7 YARN 32000 DENIER APPROXIMATELY 5 TO 6 YARN EXTRUSION THROUGHPUT: 300 KG PER HOUR EXTRUSION CAPACITY: 180 TO 250 KG PER HOUR (PRODUCT CAPACITY DEPEND ON FILAMENT SIZE) EXTRUDER SCREW DIAMETER: Ø 120mm T-DIE WIDTH: 1300mm TAKE-OFF ROLLER WIDTH: 1200mm TAKE-OFF LINE SPEED: 160 METERS PER MINUTE (MAXIMUM) OPERATION SIDE: RIGHT TO LEFT, OR LEFT TO RIGHT Learn More

REFERENCE NUMBER: K-0593 DIGITAL DISPLAY ELECTRONIC UNIVERSAL TENSION TESTING MACHINE MAINLY APPLICABLE TO METALLIC, NONMETALLIC AND COMPOSITES TO TEST MECHANICAL PROPERTIES SUCH AS TENSION, COMPRESSION AND BENDING, ETC PRECISE AUTO CONTROL AND DATA ACQUISITION SYSTEM CAN REALIZE FULL DIGITAL ADJUSTMENT TO DATA ACQUISITION AND CONTROL PROCEDURE DURING TENSILE TEST, IT CAN TEST MAX. TENSION, TENSILE STRENGTH, ELONGATION STRAIN, ELONGATION, ETC ALL THESE PARAMETERS CAN BE AUTOMATICALLY CALCULATED THROUGH MAIN CONTROLLER ACCORDING TO TEST PARAMETERS WHICH ARE SET BEFORE TEST AND MEANTIME DISPLAY TEST RESULTS ALL TEST PARAMETERS CAN BE BOTH INQUIRED AND DISPLAYED AFTER TEST AND ALSO CAN BE PRINTED. THIS MACHINE IS ALSO APPLICABLE TO CEMENTING COMPOUND, TUBES, PIPES, AEROSPACE, PETROCHEMICAL INDUSTRY, WATERPROOF ROLLS, WIRES AND CABLES, TEXTILE, FIBERS, RUBBER, CERAMICS, FOOD, MEDICAL PACKING, GEOTEXTILE, FILM, WOOD, PAPER AND OTHER MANUFACTURING INDUSTRIES AND QUALITY SUPERVISION DEPARTMENTS QUANTITY AVAILABLE: 1 Learn More

YY-3477 FULLY AUTOMATIC ETO STERILIZER MACHINE, H 2200 X W 2800 X L 8000 mm (INNER SIZE) (DOUBLE DOOR) MILD STEEL BODY SIZE: H 2200 X W 2800 X L 8000 mm (INNER SIZE) (DOUBLE DOOR). CONSTRUCTION OF MATERIAL: CONTACT PART MILD STEEL NON-CONTACT PART MILD STEEL. Learn More

T-8176 A8 OPEN END MACHINE, 552 ROTORS, YEAR 2015 A8 OPEN END MACHINE YEAR 2015 552 ROTORS PER SET SAME TIME CAN PRODUCE 3 TYPE YARN 4 PCS ROBOTS COROLAB CLEANER T633BD ROTOR CUP BD174 COMBING ROLLER MOMENT SPINNING 20S COTTON YARN MACHINE WIDTH: 1547mm QUANTITY: 2 Learn More

TT-8049 FISCHER+KRECKE 16S CI-GEARLESS FLEXOPRESS, WIDTH 1250mm, 8 COLORS, YEAR 2005 1. FISCHER+KRECKE CI-FLEXOPRESS 16S-8 2. 8 COLORS FLEXO ROTARY PRINTING MACHINE 3. BRAND: FISCHER + KRECKE 4. TYPE: FLEXPRESS 16S-8 5. YEAR OF MANUFACTURE: 2005 6. NUMBER OF PRINTING UNITS: 8 COLORS 7. PRINT WIDTH: MAX. 1,250mm 8. MATERIAL WIDTH: MIN. 650mm, MAX. 1,300mm 9. PRINT LENGTH: MIN. 320mm, MAX. 800mm 10. MECHANICAL PERFORMANCE: MAX. 460 M/MIN 11. ROLL DIAMETER: MAX. 1,000mm (UNWINDER/REWINDER) 12. CORE EQUIPMENT: 70, 76, 100, 150mm QUANTITY: 1 Learn More

TT-7378 WINDMOLLER & HOLSCHER NOVOFLEX, YEAR 2005, FLEXO 1. WINDMOLLER & HOLSCHER NOVOFLEX 2. YEAR 2005 3. GEARLESS 4. 10 COLORS CI QUANTITY: 1 Learn More

YY-1136 ULTRAVIOLET STERILIZER MAINTENANCE OF UV STERILIZER: 1 CHECK REGULARLY TO ENSURE THE NORMAL OPERATION OF THE UV LAMP. 2. AFTER 9000 HOURS OR ONE YEAR OF CONTINUOUS USE, THE ULTRAVIOLET LAMP SHOULD BE REPLACED. WHEN REPLACING A NEW LAMP, FIRST UNPLUG THE POWER SOCKET OF THE LAMP AND TAKE OUT THE ULTRAVIOLET LAMP. PAY ATTENTION NOT TO TOUCH THE QUARTZ GLASS OF THE NEW LAMP WITH YOUR FINGERS, BECAUSE THE STAIN WILL AFFECT THE INTENSITY OF THE LIGHT, AND CAREFULLY PUT THE LAMP INTO THE CHAMBER OF THE STERILIZER. Learn More

TILE FACTORY DESIGNED BY SACMI / ITALY
YEAR ESTABLISHED 2014 TO 2016
THIS PLANT IS AN ENVIRONMENTALLY FRIENDLY ENTERPRISE, WHEN IT RECYCLES 100% OF ITS EFFLUENTS AND PERFORMS HEAT RECOVERY, THEREBY SAVING ENERGY

See all pictures:
https://www.flickr.com/photos/183869481@N08/albums/72157710649767958

THE PLANT:
COVERS AN AREA OF 22 THOUSAND SQUARE METERS
THE PRODUCTION CAPACITY IS 7 MILLION SQUARE METERS / YEAR
CERAMIC FLOOR TILES
CERAMIC WALL TILES
BMR POLISHING LINE
BMR SQUARING & CHANFERING LINE
THE MAIN RAW MATERIALS ARE CLAY (DB-4) - 31 %, ALBITE (STD5) - 60 %
NEPHAIIN (PN9595) - 2.5 %, KAOLIN (RHB1) - 6.5 %
ON TOP OF IT THEY ARE USING GLAZE MATERIALS AND PAINTS
•FROM THE MOMENT THE MATERIAL IS PREPARED IT IS BEING DRIED PRESSED ON ONE OF FOUR (4) PRODUCTION LINES.
•TWO (2) LINES ARE WITH SACMI PRESSES OF PH 7,500 TON EACH AND HORIZONTAL DRYERS SACMI
•TWO LINES ARE WITH SACMI PRESSES OF PH 3,590 TON EACH AND VERTICAL DRYERS SACMI
•ALL FOUR (4) LINES HAVE THEIR OWN DIGITAL PRINTING MACHINE INCORPORATED
•ALL PRODUCTS ARE BEING GLAZED AND FIRED ON 1200 DEGREES IN ONE OF THE TWO (2) KILNS, SACMI
FOUR (4) SORTING, PACKING AND PALLETIZING LINES
GLAZE PREPARATION LINE
COMPLETE INSTALLATION FOR SMALL PRODUCTION CAPACITIES
COMPLETE FOILING LINE
COMPLETE ELECTRIC INSTALLATION
POWER GENERATOR UNIT
COMPRESSED AIR INSTALLATION

MACHINES ARE MADE BY:
SACMI: ITALY
NUOVA ERA / ROBOBOX: ITALY
BMR: ITALY
IN.TE.SA: ITALY
CUCCOLINI: ITALY
SYSTEM CERAMICS: ITALY
TGMAC SR.L: ITALY
DURST: GERMANY
ROTOCOLOR MAG: ITALY
NUOVA FIMA: ITALY
OMS: ITALY
MARPAK OMS: ITALY
MESSERSI PACK: ITALY

TILE SIZES
THE FACTORY MANUFACTURES TILES OF VARIOUS SIZES FROM 300 X 300 TO 1200 X 1200mm IN VARIOUS TEXTURES AND DESIGNS USING DIGITAL PRINTING MACHINES
PRODUCTION CAPACITY IS 7 MILLION SQUARE METERS / YEAR
THE FACTORY IS FULLY AUTOMATED AND USING ADVANCED CONTROL SYSTEMS!

HUGE AMOUNT OF ORIGINAL SPARE PARTS AVAILABLE WITH THIS PLANT
THIS PLANT IS AVAILABLE WITH THE COMPLETE ELECTRIC, AIR, GAS, RECYCLING INSTALLATION

THIS PLANT CAN BE SOLD: WITH 4 LINES OR 2 AND 2 LINES

 

Learn More

REFERENCE NUMBER: T-6864 ZIMMER ROTARY PRINTING MACHINE, WIDTH 3300mm, YEAR 2008 ZIMMER ROTARY PRINTING MACHINE TYPE ZTT VISIONPRINT CLOSED VP-C 002 YEAR 2008 12 COLORS INSTALLED (POSSIBILITY FOR 15) WIDTH 3300mm MAX WORKING WIDTH 3250mm MIN WORKING WIDTH 1600mm FABRIC FEEDING SYSTEM CF-W-2S WINDING SYSTEM STORK R640 REPEAT 640 TO 1018mm (25” 40”) MAGNETIC SQUEEZERS WORKING SPEED: 4 TO 100 M/MIN BLANKET WASHING AND DRYING WATER SAVING SYSTEM DRIVE UNIT: INDIVIDUAL STEPPER MOTORS WITH DIGITAL SYNCHRONIZATION HIGH-PRODUCTION DRYER TYPE COMPACT HC-G WITH VERTICAL FABRIC FEEDING AND STRUCTURE FOR THE UPPER POSITIONING 4 SECTIONS, 3 PASSAGES NATURAL GAS HEATING WEISSHAUPT GAS BURNERS WITH AUTOMATIC TEMPERATURE CONTROL WORKING TEMPERATURE 150 TO 180°C SPEED SYNCHRONIZATION SYSTEM BETWEEN THE DRYER AND THE PRINTING MACHINE RWA-A-PA EXIT SYSTEM PIGMENTS THERMOFIXING SYSTEM COMPUTERIZED VISIONREMOTE CONTROL VISIONCONTROL SOFTWARE IN ENGLISH TOUCH SCREEN CYLINDERS WASHING SWB-2S SQUEEZES WASHING RGW-BRG-MAN DELIVERY READY QUANTITY: 1 Learn More

J-4684 DIGITAL KNIFE CUTTING MACHINE, WORKING AREA 2500mm x 1600mm, FOR SINGLE PLY FILM CUTTING WORKING AREA: LENGTH 2500 x WIDTH 1600mm MAIN CUTTING CONFIGURATION: 1) AUTO FEEDING TABLE 2) BELT DRIVE SYSTEM 3) 8 INDEPENDENT SUCTION ZONES (UNDERNEATH THE MACHINE TABLE THERE ARE 8 TUBES CONNECTING TO THE VACUUM PUMP. THERE IS ONE SOLENOID VALVE WHICH CONTROLS THE OPENING AND CLOSING) 4) 7.5 KW VACUUM PUMP 5) ONE KNIFE HOLDER 6) OSCILLATING KNIFE QUANTITY: 1 Learn More