Search results for: 'oven the'

REFERENCE NUMBER: M-5010 (12123GHBLSD11UN) L COMPLETE GLASS FIBER PROCESSING LINE FIBER PREPARATION & WEB FORMING EQUIPMENT CURING OVEN WITH ALL AUXILIARY EQUIPMENT, CROSS CUTTER, STACKER, AND WINDER RECUPERATIVE THERMAL OXIDIZER (RTO) TO TREAT OVEN EXHAUST DUST FILTRATION SYSTEM WITH RECYCLING OF FIBER AND RESIN PHENOLIC POWDER RESIN SUPPLY SYSTEM COMPLETE ELECTRIC CONTROL SYSTEM (SIEMENS S 7) FIBER BLEND CAPABILITIES: GLASS FIBER E GLASS UP TO STAPLE LENGTH OF 3 1/4 INCH 100% GLASS FIBER BLENDS WITH ANY MAN MADE FIBERS SUCH AS PET-PA OR RAYON GLASS FIBER BLENDS WITH ANY OF THE ABOVE PLUS ORGANIC FIBERS SUCH AS CELLULOSE, WOOD, NEWSPAPER, COTTON, AND ALL NATURAL FIBERS BI-CO FIBERS USED AS BINDER FIBER WITH A STAPLE LENGTH OF 2 INCHES AND A DTEX RANGE FROM 3 TO 10 MINIMUM BLEND RATIO IS 8% FOR EACH FIBER COMPONENT BLEND ACCURACY WITH THE USE OF OUR CONTROLS AND WEIGHING SYSTEM AS OFFERED +/- 2% WEB FORMING CAPABILITES: MINIMUM WEIGHT WITH 100% GLASS FIBER IS 35 TO 40 G/FT² MAXIMUM WEIGHT WITH 100% GLASS FIBER IS 300 G/FT² PRODUCT LOFT WITH 100% GLASS FIBER AT LOWEST WEIGHT AND FIBER LENGTH OF 3 INCH IS 45 TO 55 mm PRODUCT LOFT WITH 100% GLASS FIBER AT HIGHEST WEIGHT IS 250 mm PRODUCT WEIGHT ACCURACY IF OUR WEIGHT AND CONTROL SYSTEM IS IN USE WILL BE +/- 3% IN MACHINE & CROSS MACHINE DIRECTION FIBER DISTRIBUTION AND PRODUCT APPEARANCE AT LOWEST WEIGHT +/- 5% (WINDOWS AND CLOUDS) PHENOLIC RESIN CAPABILITIES: POWDER INTRODUCTION RATE INTO THE WEB FORMER IS MIN OF 10% AND A MAX OF 40% TRADITIONALLY THE AMOUNT OF BINDER RESIN IN USE IS BETWEEN 18 TO 22% IN RELATION TO THE FIBER WEIGHT POWDER DISTRIBUTION WITHIN THE PRODUCT AT AN ACCURACY OF +/- 3% PRODUCTION CAPACITIES PER HOUR WITH A MAXIMUM WORKING WIDTH OF 110 INCHES: WITH THE LOWEST PRODUCTION WEIGHT OF 35 TO 40 G/FT² 14 M/MIN AND 1,660 LB/HR WITH A PRODUCT WEIGHT OF 100 G/FT² 16 M/MIN OR 52 FT/MIN AND 4,000 LB/HR HIGHER PRODUCT WEIGHT (E.G.) 200 G/FT² 8 TO 9 M/MIN OR 26 TO 30 FT/MIN AT 4,000 LB/HR THESE PRODUCTION NUMBERS ARE CONSERVATIVE AND BASED ON ACTUAL TRIALS AND EXPERIENCE THE REAL PRODUCTION OUTPUT PER HOUR CAN BE INCREASED WHEN LOWER QUALITY EXPECTATIONS ARE ACCEPTED AND THE OPERATORS HAVE ACQUAINTED THEMSELVES WITH THE FEATURES OF THE EQUIPMENT QUANTITY: 1 Learn More

REFERENCE NUMBER: M-0630 SIMA PROMATECH EXTRUSION LINE EXTRUSION LINE MADE BY SIMA/PROMATECH AND ESSENTIALLY CONSISTING OF: EXTRUDER 130mm DIAMETER AUTOSCREEN GEAR PUMP DIE 1700mm CHILL ROLL DIAMETER: 450 X 1800 AND AIR KNIFE CUTTING UNIT FIRST GODET, 3 ROLLS, DIAMETER 315 X 1650mm, PLUS 1 NIP ROLL STRETCHING OVEN 5000 X 1600 SECOND GODET, 6 ROLLS, DIAMETER 315 X 1650mm, PLUS 2 NIP ROLLS FIBRILLATOR UNIT ANNEALING GODET, 9 ROLLS + NIP ROLL CENTRAL CABINET HOT OIL EQUIPMENT FOR ANNEALING GODET WASTE SUCTION EQUIPMENT AS NEW QUANTITY AVAILABLE: 1 Learn More

FIBRE OPENING/ AND MIXING LINE: 2 BALE OPENERS TYPE AC-1500, WORKING WIDTH 1500mm, INCL. FEEDING CONVEYOR. 1 BALE OPENER TYPE AS-204 (FOR MELT FIBRE DOSING), WITH ELECTRONIC WEIGHING TYPE SP-205. 1 TYPE AFM 700, WIDTH 700mm, LENGTH 7500mm. 1 MIXING OPENER TYPE AF 700, WORKING WIDTH 700mm., OPENING ROLLERS WITH NEEDLES. 1 FINE OPENER TYPE SF-1500, WORKING WITH 1500mm, 500KG/H WITH DOSING SHAFT. 1 FILTER STATION FOR TRANSPORT AIR, TYPE CF DOUBLE BAG FILTER. 1 ELECTRONIC CONTROL PANEL WITH TOUCHSCREEN. AIRLAID LINE: 1 DOSING MACHINE BEMABLOW, WORKING WIDTH 2500mm WITH ELECTRONIC CONTROLLED DOSING CAPACITY. 1 AIRLAID WEB BUILDER TYPE FORMER T-MAX WORKING WITH 2700mm WEB HEIGHT 50-350mm, WEB WEIGHT 300 TILL 300GT/M2. 1 ELECTRONIC CONTINUING BAND WEIGHING DEVICE BEMAMULTISCALE, FOR WEB FROM AIRLAID WEB BUILDER, WITH FEEDBACK TO AIRLAID MACHINE. 1 FILTER STATION FOR TRANSPORT AIR TYPE CF, DOUBLE BAG FILTER. 1 ELECTRONIC CONTROL PANEL WITH TOUCHSCREEN. SPRAYING AND DRYING. 1 PRAYING CABIN BOMBI, 2600mm WORKING WIDTH. 1 THERMOBONDING OVEN BOMBI 2012, TYPE TFP/2N/2.7M, 2 DRYING SECTIONS, GAS HEATED, INCL. CALIBRATING ZONE, 2 STATIC FILTERS, 11.0 RESP. 5.5KW, OVEN LENGTH 12000mm. 1 CALANDER BOMBI 2012, TYPE CAL/2C/2.7M. 1 COOLING SECTION BOMBI 2012, TYPE RAF. 1 LENGTH- AND CROSS CUTTER BOMBI 2012, TYPE TG2.7/2+2. 1 ELECTRONIC CONTROL PANEL/ PROGRAMMER WITH TOUCHSCREEN. - ABOVE LINE CAN PROCESS FLAX, HEMP, REGENERATED FIBRES, POLYESTER AND LOW MELT FIBRES. - PRODUCTION 500KG/H. - CONSUMPTION: GAS 45M³/H, ELECTRICITY 90KW/H. Learn More

TT-6232 THERMOBONDING AND SPRAY-BONDING LINE, WORKING WIDTH 3200mm, YEAR 1990 THERMOBONDING AND SPRAY-BONDING LINE YEAR: 1990 WORKING WIDTH: 3200mm QUANTITY: 1 Learn More

TT-3478 AIRLAY NEEDLING+THERMOBONDING LINE, WORKING WIDTH 2600mm, YEAR 2016 AIRLAY NEEDLING+THERMOBONDING LINE YEAR: 2016 QUANTITY: 1 Learn More

TT-3476 AIRLAY THERMOBONDING LINE, WORKING WIDTH 2600mm, YEAR 2016 QUANTITY: 1 Learn More

TT-3439 AIRLAY THERMOBONDING LINE, WORKING WIDTH 2500mm, YEAR 2008 TO 2011 AIRLAY THERMOBONDING LINE YEAR: 2008 TO 2011 WORKING WIDTH: 2500mm QUANTITY: 1 LINE Learn More

TT-3253 BONINO TURBO CARD LINE FOR THERMOBONDED NONWOVENS, WIDTH 2500mm, YEAR 2006 TO 2011 BONINO COMPLETE TURBO CARD LINE FOR THERMOBONDED NONWOVENS FOR FURNITURE INDUSTRY FINAL PRODUCT: THERMOBONDED NONWOVENS WEIGHT 60 TO 1000 G/M2 WIDTH 2500mm HEIGHT UP TO 100mm RAW MATERIAL: POLYESTER FIBERS 6-15 DTEX. Learn More

T-8941 THERMOBONDING AND SPRAY-BONDING LINE, WORKING WIDTH 3200mm, YEAR 1990 THERMOBONDING AND SPRAY-BONDING LINE YEAR: 1990 WORKING WIDTH: 3200mm QUANTITY: 1 Learn More

T-8791 NEEDLING+THERMOBONDING LINE, WORKING WIDTH 4500mm, YEAR 1995 TO 2005 QUANTITY: 1 Learn More