Search results for: 'cutter 0''

REFERENCE NUMBER: M-1027 NEEDLE PUNCHING PLANT COMPLETE WITH 6 FEHRER NEEDLE LOOMS YEAR 1993 ARTIFICIAL LEATHER PRODUCING AND OTHER HIGH/EXTRA-HIGH DENSITY PRODUCING NONWOVEN NEEDLE PUNCHING LINE COMPLETE WITH 6 SETS FEHRER NEEDLE PUNCHING LOOMS YEAR: 1993 PLANT IS RUNNING CAN BE INSPECTED QUANTITY AVAILABLE: 1 Learn More

M-1520 FEHRER NONWOVEN PRODUCTION LINE WIDTH 4000mm YEAR 1997

OFFER 001
MAKE: FEHRER AG
TYPE: V21/R – K12

OFFER 002
REUKE BALE OPENER 1

OFFER 003
REUKE BALE OPENER 2

OFFER 004
REUKE BALE OPENER 3

OFFER 005
REUKE MIXING BELT

OFFER 006
LTG FILTRATION SYSTEM

OFFER 007
HERGETH FEEDING BOX WITH CONDENSER

OFFER 008
KUKLA WEIGH BAR

OFFER 009
FEHRER AG PRE – WEB FORMING HEAD

OFFER 010
FEHRER AG RANDOM CARD

OFFER 011
SCHOTT & MEISSNER THERMOBONDING OVEN

OFFER 012
SCHIRP CROSS / LENGTHS CUTTER

OFFER 013
KSM STACKER

QUANTITY: 1

Learn More

REFERENCE NUMBER: F-1364 FABRIC AND QUILTED FABRIC WASTE CUTTING MACHINE THIS MACHINE IS USED MAINLY FOR FABRIC WASTE, QUILTED FABRIC WASTE, AND FOAM WASTE CUTTING AND RECYCLING. EQUIPPED WITH 2-SERIES CUTTERS TO CUT THE MATERIALS INTO SMALL PIECES. THE CUTTING TOOL IS SHARP AND DURABLE. SUITABLE FOR CUTTING SOFT MATERIALS. SAVE ON COSTS BY MAKING FULL USE OF FABRIC WASTE QUILTED FABRIC WASTE. DIMENSIONS: 3100 X 3550 X 1360mm POWER: 11kW CAPACITY: 400kg PER HOUR NET WEIGHT: 1200kg QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5147 (1212NDTYXX11) L COTTON PAD MAKING MACHINE PUT ON MAKE-UP THE COTTON AND KAPOK PRODUCTION PROCESS: THE EQUIPMENT IS DIVIDES CUTS THE GOOD DEGREASING TO LAP, THE ADHESIVE-BONDED CLOTH OR THE GAUZE, LAYING ASIDE RAW MATERIAL AFTER THE COMPACTION, THE HEATING EMBOSSES, ROLLS CUTS PROCESS ONE TIME TO COMPLETE. MAIN FEATURE THE HIGH SPEED PUNCH PRESS REVOLVING BLANKING PRINCIPLE OF WORK, THE TECHNOLOGY IS MATURE, THE WORK IS STABLE, THE SERVICE WORK LOAD ARE FEW, OUTPUT MODE: THE PIPELINE ARRANGEMENT OUTPUT, THE CODE FALLS NEATLY, THE BAGGING IS CONVENIENT, A PERSON THEN OPERATES THE COMPLETE MACHINE, BIG REDUCED ARTIFICIAL AMOUNT OF USE; THE GOOD MAN-MACHINE OPERATION CONTACT SURFACE, MAY UNFOLD THE REAL TIME OPERATION INFORMATION, IS ADVANTAGEOUS FOR THE PRODUCTION MONITORING; THE MOLD REPLACEMENT IS CONVENIENT, THE CONSTRUCTION COST IS LOWER THAN GREATLY ROLLS CUTS THE CARVING FLOWER CUTTER BAR, MOREOVER AFTER THE MOLD WEARS, EASY TO REPAIR, DOES NOT NEED TO DISCARD THE REPLACEMENT, SAVES THE MAINTENANCE COST. PUT ON MAKE-UP THE COTTON AND KAPOK MAJOR TECHNIQUE PARAMETER: PRODUCTION SPEED: 20--30M/MIN PRODUCTION SPECIFICATION: MAY ACCORDING TO THE REQUEST ADJUSTMENT TOTAL POWER: 5KW MACHINE DIMENSION: 3.5M*1.7M*2.5M MODEL: A QUANTITY: 1 Learn More

REFERENCE NUMBER: M-1585 (66012THSGW5UF) STAPLE FIBER LINE – 20 TO 25 TONS PER DAY PRODUCT SPEC.: 1.4 ~ 20 DE. PET STAPLE FIBER SPINNING LINE CAPACITY: SPINNING: 20 T/D, DRAWING: 25 T/D CURRENTLY IN OPERATION SPINNING LINE DRAW LINE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1186 (1212GHBXX11) A SCHÄRER SCHWEITER METTLER DOUBLER DATA PS6-D YEAR 1994 60 POSITIONS MANUFACTURER: SSM (SCHÄRER SCHWEITER METTLER) MODEL: PS6-D YEAR: 2001 SECTIONS: 12 POSITIONS: 60 (TOTAL) MANUALS: YES (SERVICE) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5010 (12123GHBLSD11UN) L COMPLETE GLASS FIBER PROCESSING LINE FIBER PREPARATION & WEB FORMING EQUIPMENT CURING OVEN WITH ALL AUXILIARY EQUIPMENT, CROSS CUTTER, STACKER, AND WINDER RECUPERATIVE THERMAL OXIDIZER (RTO) TO TREAT OVEN EXHAUST DUST FILTRATION SYSTEM WITH RECYCLING OF FIBER AND RESIN PHENOLIC POWDER RESIN SUPPLY SYSTEM COMPLETE ELECTRIC CONTROL SYSTEM (SIEMENS S 7) FIBER BLEND CAPABILITIES: GLASS FIBER E GLASS UP TO STAPLE LENGTH OF 3 1/4 INCH 100% GLASS FIBER BLENDS WITH ANY MAN MADE FIBERS SUCH AS PET-PA OR RAYON GLASS FIBER BLENDS WITH ANY OF THE ABOVE PLUS ORGANIC FIBERS SUCH AS CELLULOSE, WOOD, NEWSPAPER, COTTON, AND ALL NATURAL FIBERS BI-CO FIBERS USED AS BINDER FIBER WITH A STAPLE LENGTH OF 2 INCHES AND A DTEX RANGE FROM 3 TO 10 MINIMUM BLEND RATIO IS 8% FOR EACH FIBER COMPONENT BLEND ACCURACY WITH THE USE OF OUR CONTROLS AND WEIGHING SYSTEM AS OFFERED +/- 2% WEB FORMING CAPABILITES: MINIMUM WEIGHT WITH 100% GLASS FIBER IS 35 TO 40 G/FT² MAXIMUM WEIGHT WITH 100% GLASS FIBER IS 300 G/FT² PRODUCT LOFT WITH 100% GLASS FIBER AT LOWEST WEIGHT AND FIBER LENGTH OF 3 INCH IS 45 TO 55 mm PRODUCT LOFT WITH 100% GLASS FIBER AT HIGHEST WEIGHT IS 250 mm PRODUCT WEIGHT ACCURACY IF OUR WEIGHT AND CONTROL SYSTEM IS IN USE WILL BE +/- 3% IN MACHINE & CROSS MACHINE DIRECTION FIBER DISTRIBUTION AND PRODUCT APPEARANCE AT LOWEST WEIGHT +/- 5% (WINDOWS AND CLOUDS) PHENOLIC RESIN CAPABILITIES: POWDER INTRODUCTION RATE INTO THE WEB FORMER IS MIN OF 10% AND A MAX OF 40% TRADITIONALLY THE AMOUNT OF BINDER RESIN IN USE IS BETWEEN 18 TO 22% IN RELATION TO THE FIBER WEIGHT POWDER DISTRIBUTION WITHIN THE PRODUCT AT AN ACCURACY OF +/- 3% PRODUCTION CAPACITIES PER HOUR WITH A MAXIMUM WORKING WIDTH OF 110 INCHES: WITH THE LOWEST PRODUCTION WEIGHT OF 35 TO 40 G/FT² 14 M/MIN AND 1,660 LB/HR WITH A PRODUCT WEIGHT OF 100 G/FT² 16 M/MIN OR 52 FT/MIN AND 4,000 LB/HR HIGHER PRODUCT WEIGHT (E.G.) 200 G/FT² 8 TO 9 M/MIN OR 26 TO 30 FT/MIN AT 4,000 LB/HR THESE PRODUCTION NUMBERS ARE CONSERVATIVE AND BASED ON ACTUAL TRIALS AND EXPERIENCE THE REAL PRODUCTION OUTPUT PER HOUR CAN BE INCREASED WHEN LOWER QUALITY EXPECTATIONS ARE ACCEPTED AND THE OPERATORS HAVE ACQUAINTED THEMSELVES WITH THE FEATURES OF THE EQUIPMENT QUANTITY: 1 Learn More

INVENTORY NUMBER: E-6265-A COMPLETE FOAM PLANT FOR ROUND LOGS AND PEELER PROCESSING ONLY FOR SALE: FOAM MAKING MACHINE FOAM BLOCK FORMING MACHINE MODEL F-3# WITH AUTOMATIC HYDRAULIC BOX LIFTING BY 4 HYDRAULIC CYLINDERS QUANTITY: 1 PEELER FOAM PEELER CUTTING SIZE: 2000 MM X 2150 MM DIAMETER CUTTING THICKNESS: 2 - 25 MM CUTTER BAND TOTAL LENGHT: 8640 MM TURNING SPEED: 35 M - 30 M/MIN POWER: 4.69 KW MACHINE WEIGHT: 1800 KG MACHINE EXTERNAL SIZE: W 1650 X L 4750 X H 1678 MM QUANTITY: 1 GRINDING MACHINE FOAM GRINDER (CRUSHING) MACHINE MODEL: HSFS-22 BREAKING SPEED: 100 - 200 KG/HOUR BREAKING PARTICULATE MIN: 3 MM - 20 MM MOTOR POWER: 22 KW SCREEN: 3 PCS (8 MM - 18 MM - 30 MM) FAN: 4 KW MACHINE WEIGHT: 1500 KG MACHINE SIZE: W 1100 MM X L 2900 MM X H 1000 MM QUANTITY: 1 ROUND BLOCK MOLD ROUND FOAM MOLD: ROUND MOLD TO FEED PEELER MACHINE MODEL Y-1# QUANTITY: 2 HORIZONTAL ROUND BLOCK BORING MACHINE FULL SET OF SPARE PARTS ESTIMATED NEEDED FOR 1 YEAR FULL SET OF MECHANICAL AND ELECTRICAL DIAGRAMS PLANT BLOCK PRODUCTION: 24 TO 40- BLOCKS/8 HR SHIFT FLOORSPACE REQUIREMENTS: 5000 SQ FT FOR MACHINERY (RAW MATERIAL AND FINISHED PRODUCT NOT INCLUDED IN THIS FIGURE) QUANTITY: 1 QUANTITY AVAILABLE: 6 Learn More

REFERENCE NUMBER: M-1758 (6602BHBBE5U) GEOTEXTILE CALENDER MACHINE -5700mm- YEAR 2004 MAKE: BOMBI MECCANICA ITALY 5.7 M WIDE GEOTEXTILE CALENDER MACHINE YEAR: 2004 IS IN PERFECT CONDITION FEW HOUR PRODUCTION IT IS CONNECTED AND CAN BE SHOWN TO CUSTOMERS VOLTAGE: 440V / 60 HZ / 3 PHASES UNWINDER ACCUMULATORS WITH ROLLS, 50M OF CONTENT 2 ROLLS CALENDER 5.7 WIDE 200,000 KCAL/HR GAS OIL HEATER UPPER HOOD FOR THE SMOKE COLLECT METAL DETECTOR INSTALLED ON TOP OF CALENDER ADJUSTING 2 ROLLS TEMPERATURE INDEP. ACCUMULATORS WITH ROLLS, 50 M LONG CROSS CUTTER W/6 LONG SLITTERS, AND EXIT BELT WINDER OPTION ROLL DISCHARGER 2.3 M WINDER, SPEED UP TO 30 M/MIN, READY TO BE SYNCHRONIZED 2.3 M WIDE, EDGE TRIMMERS WITH 2 DISC BLADES FELT WIDTH: 5.5 METER WEB THICKNESS AT ENTRY: AROUND 1 TO 2 mm WEB PREPARATION AT THE INLET: CROSS LAPPING AND NEEDLING PRODUCTION LINE SPEED: UP TO 25 M/MIN TYPE OF TREATMENT: HEAT SETTING, SMOOTHING OF THE SURFACES AND CALIBRATION, CUTTING AND ROLLING UP FELT WEIGHT: 90 TO 300 GSM FIBERS: POLY COTTON BLEND, POLYESTER, ACRYLIC, POLYPROP THERMOSETTING TEMEPRATURE: UP TO 225°C QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3744 (9902TGML8U)-D ATLANTA ATTACHMENT BAND AND HEALTH MACHINE MEASURES BORDER, SETS HANDLES (4 OR 8), MEASURES, CUTS AND CLOSES BORDER ACCOMMODATES 8 ROLLS OF HANDLE FOR QUICK CHANGEOVER AUTOMATICALLY DETECTS AND CUTS OUT SPLICES AND DEFECTS LOCKSTITCH SEWING HEAD FOR CLOSING BORDER WITH NEEDLE POSITIONER, AUTOMATIC THREAD TRIMMER & PRESSER FOOTLIFT FEEDS PRE-MADE HANDLES FROM ROLL CAPACITY UP TO 15" BORDERS STORES UP TO 22 STYLES PROGRAMMABLE BOX "X" TACKER SERIAL BUS CONTROL SYSTEM WITH TOUCH SCREEN UNCONDITIONALLY GUARANTEED THREE YEARS SELF-DIAGNOSTIC SOFTWARE HEAVY-DUTY GUILLOTINE CUTTER WITH TEMPERED BLADES HEAVY-DUTY FEEDING MODULE WITH URETHANE ROLLERS QUANTITY AVAILABLE: 1 Learn More