Search results for: 'CORE'

J-3004 FIBRILLATED RAFFIA TAPE EXTRUSION LINE – NEW, 120mm PP FIBRILLATED YARN EXTRUDER LINE MODEL: NOVASTAR-120 EXTRUSION LINE FOR PRODUCTION OF PP FIBRILLATED YARN RAW MATERIAL: PP GRANULE FINISHED PRODUCTS: NON-TWISTED TAPE YARN, FIBRILLATED YARN FOR TWINE RANGE OF PRODUCT: 10,000 TO 30,000 DENIER 10000 DENIER APPROXIMATELY 17 TO 19 YARN 16000 DENIER APPROXIMATELY 11 TO 12 YARN 22000 DENIER APPROXIMATELY 8 TO 9 YARN 28000 DENIER APPROXIMATELY 6 TO 7 YARN 32000 DENIER APPROXIMATELY 5 TO 6 YARN EXTRUSION THROUGHPUT: 300 KG PER HOUR EXTRUSION CAPACITY: 180 TO 250 KG PER HOUR (PRODUCT CAPACITY DEPEND ON FILAMENT SIZE) EXTRUDER SCREW DIAMETER: Ø 120mm T-DIE WIDTH: 1300mm TAKE-OFF ROLLER WIDTH: 1200mm TAKE-OFF LINE SPEED: 160 METERS PER MINUTE (MAXIMUM) OPERATION SIDE: RIGHT TO LEFT, OR LEFT TO RIGHT Learn More

WALL MOUNTED
SCREEN SIZE: 8" IPS
OPERATING SYSTEM: ANDROID
CPU: QUAD CORE
ROCKCHIP: RK3288
RAM: 2G
ROM: 8G
CAMERA PIXEL: 200W
WORKING METHOD: INFARED FACIAL RECOGNITION AND TEMPERATURE SYSTEM
INSTALLATION: WALL MOUNTING

TABLE MOUNTED
SCREEN SIZE: 8" IPS
OPERATING SYSTEM: ANDROID
CPU: QUAD CORE
ROCKCHIP: RK3288
RAM: 2G
ROM: 8G
CAMERA PIXEL: 200W
WORKING METHOD: INFARED FACIAL RECOGNITION AND TEMPERATURE SYSTEM
INSTALLATION: TABLE INSTALLATION

STANDING ON FLOOR
SCREEN SIZE: 8" IPS
OPERATING SYSTEM: ANDROID
CPU: QUAD CORE
ROCKCHIP: RK3288
RAM: 2G
ROM: 8G
CAMERA PIXEL: 200W
WORKING METHOD: INFARED FACIAL RECOGNITION AND TEMPERATURE SYSTEM
INSTALLATION: FLOOR STANDING

Learn More

REFERENCE NUMBER: X-0008 ELECTRONICALLY CONTROLLED SEMI-AUTOMATIC FILLING FOR PILLOW, CUSHIONS, QUILTS, BABY MATTRESSES AND MORE THIS MACHINE IS A STAND-ALONE AND VERY VERSATILE PILLOW STUFFING AND BAGGING MACHINE. ITS SIMPLE OPERATION ALLOWS TO USE THE SAME EQUIPMENT TO ACCOMPLISH THE TWO PROCESSES: STUFFING A BATT OR A FOAM CORE IN A COVER (OR AN INSERT IN THE FINAL DEC COVER / A PILLOW IN THE FINAL ZIPPERED COVER) AND/OR PUT A FINISHED PILLOW IN A BAG (INDIVIDUAL PE BAG, TWIN-PACK BAG, ZIPPERED VINYL BAG, ETC). THE MACHINE CAN BE LOADED MANUALLY OR WITH A CONVEYOR ON THE REAR PART, WHILE AN OPERATOR IS NEEDED IN THE FRONT: HE PUTS THE COVER/BAG ONTO THE STUFFING BELTS, ACTIVATES THE TENSIONING FORKS WITH THE PEDAL AND HOLDING THE COVER/BAG FACILITATES THE PILLOW STUFFING. POWER SUPPLY IS 400 VOLTS, WILL NEED A TRANSFORMER TO OPERATE ON 480 VOLTS, INQUIRE IF NEEDED Learn More

BRUCKNER BOPP EXTRUSION LINE, WIDTH 8200mm, THREE LAYERS, BUILT 1992, COMPLETED WITH AN ATLAS SLITTER/REWINDER, MODEL CW, WIDTH 8200mm. AND FURTHER AUXILIARIES, INCLUDING SPARE PARTS. NAMEPLATE CAPACITY 20,000 T/Y. RAW MATERIALS SECTION - 4 SILOS 250 M3 ALUMINIUM - 2 SILOS 100 M3 ALUMINIUM - 2 SILOS 50 M3 ALUMINIUM - PNEUMATIC TRANSPORT SYSTEM; COMPUTERIZED DOSING SYSTEM, HOPPERS AND SCALES FOR THE THREE EXTRUDERS EXTRUSION SECTION - MAIN EXTRUDERS: 2 MITSUBISHI CASCADE EXTRUDERS Ø 300 mm AND 250 mm - CO-EXTRUDERS: 2 BANDERA EXTRUDERS Ø 100 mm, EQUIPPED WITH MELT PIPES - DIE: SIMPLAST, WIDTH 1,140 mm, GAP 2 - 3.75 mm, 40 PUSH/PULL BOLTS - CHILL ROLL: Ø 3 M, 1,900,000 KJ/H COOLING CAPACITY - WATER BATH: 1.500.000 KJ/H CAPACITY MDO (MACHINE DIRECTION ORIENTATION) SECTION - PREHEATING INFRARED 130 KW - PREHEATING: 16 CHROMIUM PLATED ROLLS Ø 614 mm - STRETCHING: 6 CHROMIUM PLATED ROLLS Ø 180 mm, EQUIPPED WITH RUBBER NIP ROLLS Ø 150 mm - ANNEALING: 2 CHROMIUM PLATED ROLLS Ø 614 mm TDO (TRANSVERSE DIRECTION ORIENTATION) SECTION - TOTAL LENGTH: 66 METER - PREHEATING: 5 SECTIONS - STRETCHING : 5 SECTIONS - ANNEALING : 5 SECTIONS - NEUTRAL : 1 SECTION - COOLING : 2 SECTIONS - INLET 850 – 1,050 mm WIDTH - OUTLET 7,600 – 8,600 mm WIDTH PRS (PULL ROLL STAND) SECTION - EDGE TRIM CUTTERS - ESSECI FLAME TREATER, BURNER, CHROMIUM PLATE ROLL, RUBBER NIP ROLL - CORONA TREATER 1: 3 DISCHARGE BARS, SILICON ROLL, RUBBER NIP ROLL - CORONA TREATER 2: 2 DISCHARGE BARS, EDGE BAR, SILICON ROLL, RUNNER NIP ROLL MEASUREX/HONEYWELL GAUGE CONTROL SYSTEMS - 8.5 M SCANNER FOR FILM - 1.2 M SCANNER FOR CAST SHEET - MAIN THICKNESS CONTROL UNIT CONNECTED TO THE BOLT OF THE EXTRUSION DIE FOR LIP ADJUSTMENT WINDER - 2 TURRETS KAMPF WINDER - AUTOMATIC CUT / TURRET / MILL-ROLL CHANGE - WINDING CORES: 108 STEEL WINDING CORES Ø 500 mm CONTROL UNIT - THE LINE IS EQUIPPED WITH A FULLY INTEGRATED CONTROL SYSTEM SUPPLIED BY BRUCKNER MILL ROLL STAND (SEMI-FINISHED PRODUCTS WAREHOUSE) - 150 TOTAL POSITIONS, OF WHICH 50 IN HEATED CLOSED ROOM - 1 PICK-UP FOR LOADING / UNLOADING WINDER AND SLITTER - 1 MANUAL EMERGENCY PICK-UP FOR LOADING/UNLOADING WI NDER AND SLITTER AND MAINTENANCE - 1 SHUTTLE TO MOVE MILL ROLLS IN AND OUT OF THE WAREHOUSE - 1 MAIN CRANE FOR MOVING MILL ROLLS / EMPTY CORES RECYCLING - HERBOLD GRINDER FOR SCRAP RECOVERY - 4 FLUFF SILOS - 1 EREMA MACHINE FOR REGRANULATION, APPROX. 700 KG/H SLITTER - ATLAS CW MACHINE, BUILT 1992, MAJOR UPGRADE 2010 - INLET MILL-ROLLS MAX Ø 1.2 M, WIDTH 8.2 M - 16 REWINDING STATIONS, WIDTHS FROM 400 mm TO 2450 mm, MAX Ø 1,000 mm - AUTOMATIC KNIVES AND RE-WINDING ARMS POSITIONING PACKING - SEMI-AUTOMATIC BALLOTTI LINE FOR CONDITIONING OF ROLLS AND PALLETS, BUILT 2000 - CONVEYORS - SCALING - STRAPPING - STRETCHING UTILITIES - 3 COMPRESSORS 3 BARS FOR COMPRESSED AIR CIRCUIT FOR RAW MATERIALS HANDLING - 2 COMPRESSORS 6 BARS FOR COMPRESSED AIR - 2 CHILLERS FOR CHILLED WATER PRODUCTION - 2 WATER COOLING TOWERS - 1 BOILER FOR THERMAL OIL PRODUCTION - 3 TRANSFORMERS 15 KV TO 380 V ADDITIONAL EQUIPMENT - SPARE PARTS FOR ALL OF THE ABOVE - TECHNICAL CONSUMABLES - IT EQUIPMENT FOR CONTROLLING THE MANUFACTURING EQUIPMENT AND DATA TRAFFIC, SUCH AS SERVERS, SWITCHES AND CABLING - LABORATORY EQUIPMENT FOR QUALITY CONTROL PURPOSES Line was producing 20 to 40 microns , line can produce down to 10 to 12 microns Learn More

TT-8043 CERUTTI-28/128 R ROTOGRAVURE PRINTING PRESS, 9 COLORS, 1200mm, YEAR 1982 TO 2012 RETROFIT 1. CERUTTI-28/128 R ROTOGRAVURE PRINTING PRESS 2. 9 COLORS 3. YEAR OF CONSTRUCTION: 1982 -1996 + 2012 RETROFIT 4. OFFER EX WORKS, EXCLUDING DISMANTLING LOADING: 5. AGAINST OFFER /GEGEN ANGEBOT 6. N°1 PB 32 - N°1 TR - N°6 ES 288 - N°2 EXTENDED ES 28/8 - N°1 EXTENDED ES 128 L2 - N°1 TR - N*1 RB 28 Learn More

TT-8039 SIEMENS SST-400 30MW STEAM TURBINE+38MW GENERATOR FOR POWER PLANT, YEAR 2011 1. SIEMENS SST-400 30MW STEAM TURBINE+38MW GENERATOR FOR POWER PLANT 2. BRAND: SIEMENS 3. MODEL: SST400 4. TYPE: STEAM TURBINES 5. CONDITION: NEW QUANTITY: 1 Learn More

V-2195 FULLY AUTOMATIC SINGLE SHAFT BALONEY SLITTER, WORKING WIDTH 1850mm APPLICATIONS: SUITABLE FOR VARIOUS TAPE SUCH AS PVC, MASKING, DOUBLE SIDE, OPP PACKAGING AND FOAM TAPES, ETC. QUANTITY: 1 MACHINE NOTE: BLADE SIZE IS PER CUSTOMER REQUIREMENTS Learn More

TT-7714 GOEBEL-SUPER SLITTER-REWINDER, WIDTH 1800mm, YEAR 1993 TO 2010 1. GOEBEL-SUPER SLITTER-REWINDER 2. YEAR: 1993 TO 2010 3. WIDTH: 1800mm 4. 2 SHAFTS 5. BRAND: GOEBEL / GERMANY 6. MODEL: SUPER QUANTITY: 1 Learn More

TT-7656 PCMC IR500 INDUSTRIAL ROLL TOWEL LINE, WIDTH 2743mm, YEAR 2002 1. PCMC IR500 INDUSTRIAL ROLL TOWEL LINE 2. WEB WIDTH: 2743mm 3. 1ST UNWIND ROLL DIAMETER: 1600mm 4. 2ND UNWIND ROLL DIAMETER: 1829mm QUANTITY: 1 Learn More

TT-7648 SOLAR TAURUS 60, YEAR 2001, 50 Hz 1. BRAND SOLAR 2. MODEL TAURUS 60 3. TYPE GAS TURBINES 4. CONDITION USED 5. YEAR 2001 Learn More