Search results for: 'hydraulic po'

C-3994 BARGEMOUNTED POWER PLANT, CAPACITY 220MW

A. ONCE THROUGH STEAM GENERATOR
B. BARGE
C. CHILLERS
D. AIR COMPRESSOR
E. GAS TURBINE
F. STEAM TURBINE
G. FEEDWATER SYSTEM
H. CLOSED COOLING WATER SYSTEM
I. AUXILIARY COOLING WATER SYSTEM
J. CONDENSATE POLISHING UNIT (CPU)
K. WASTE WATER SYSTEM
L. PLANT ELECTRICAL SYSTEM
M. BLACK START DG SET
N. PLANT CONTROLS AND INSTRUMENTATION
O. PLANT FIRE FIGHTING SYSTEM
P. START UP VACUUM SYSTEM
Q. STEAM TURBINE DEAERATING CONDENSER

QUANTITY: 1 PLANT

Learn More

REFERENCE NUMBER: G-5286-A FOAM BLOCK MOULDING MACHINE (NEW) MODEL: F-2 HYDRAULIC 4 HYDRAULIC CYLINDERS : 63mm DIAMETER x 1500mm LONG QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-0272 CATTLE SLAUGHTER LINE 60 PER HOUR SHIFT PRODUCTION: 100 TONS (60 CATTLE PER HOUR) QUANTITY AVAILABLE: 1 Learn More

TT-4060-B GENERAL ELECTRIC LM2500 SAC COMPLETE POWER PLANT, 22MW, YEAR 2022, 5000 HOURS, 50Hz WE OFFER TWO TURBINES AND GENERATOR ALONE OR THE TURBINE ALONE, GENERATION 2 QUANTITY: 2 Learn More

YY-2215 USED GRANUTECH SATURN MODEL 62-40 HT DUAL SHAFT SHREDDER, CUTTER DIAMETER 20.5" AT HOOKS INLET 55" X 38"; OUTSIDE DIMENSIONS ARE 130" X 61" X 43"; POWER UNIT DIMENSIONS ARE 96" X 86" X 96"; WEIGHT IS 20.000 LBS; POWER UNIT IS 8000 LBS (DRY); CUTTER SHAFT TORQUE: FAST 64.776 FT/LBS, TORQUE: SLOW 78.653 FT/LBS; CUTTER SHAFT SPEED: FAST 22, SPEED: SLOW 18; CUTTER FORCE FAST: 77.732 LBS, SLOW: 94.383 LBS; CUTTER DIAMETER 20.5" AT HOOKS; POWER UNIT OPEN LOOP, SKID MOUNTED; ELECTRICAL POWER 200 HP (2 X 100) (OPTIONAL 150-300HP); HYDRAULIC FLOW 156 GPM; QUANTITY: 1 Learn More

REFERENCE NUMBER: R-6814 

LIROPOL TOWEL KNITTING MACHINES, RIUS WARPER, CREELS

 

(2) X LIROPOL TOWEL KNITTING MACHINES – RUNNING,

MODEL 114133 – YEAR 1994

MACHINE WIDTH 2500mm

GAUGE 12  (NEEDLES PER INCH) 

(1) X RIUS WARPER MODEL A-3 30/30

 

(1) X CREEL WITH STOP MOTION 260 POSITIONS – FOR COTTON

 

(1) X CREEL FOR WARPER 260 POSITIONS, FOR POLYESTER YARN, WITH HYDRAULIC TENSION CONTROL

 

(60) X ALUMINUM WARP BEAMS FOR COTTON 21 x 30

 

(30) X WARP BEAMS, 21 x 21 FOR POLYESTER

 

(1) X MOTORIZED PLATFORM FOR RIUS WARPER

Learn More

YY-2411 HIGH PRECISION BEAM CUTTING PRESSES-MANUAL STYLE WITH PCL SCREEN 220V, 60Hz, 3PHASE TOTAL QUANTITY: 2 Learn More

TT-8474 EREMA PC1007T FILM RECLAIM LINE UPTO 430 KGS PER HOUR, 42 KW, YEAR 2012 1. BRAND: EREMA 2. MODEL PC1007T 3. SINCE YEAR 2012 4. CATEGORY EXTRUDERS AND EXTRUSION PLANTS 5. CONDITION USED 6. CAPACITY 430 KG PER HOUR 7. POWER 42 KW 8. DELIVERY TIME 1 WEEK 9. RATED AT 350 TO 430 KGS/HOUR ON LDPE AND LLDPE AND 300 KGS/HOUR ON HDPE. QUANTITY: 1 Learn More

TT-2600 VECOPLAN VAZ 100/80U SINGLE SHAFT SHREDDER PAPER RECYCLING LINE, 16.5 HP, 11KW, 1 TON PER HOUR, RECONDITIONED BRAND VECOPLAN MODEL VAZ 100/80U CATEGORY SIZE REDUCTION / GRANULATORS / SHREDDERS CONDITION USED QUANTITY: 1 Learn More

YY-2424 USED NGR REGRANULATION LINE for BOPP FILM, FLUFF, LUMPS, MDO WASTE 900 TO 1000 KG PER H OVERCONSUMPTION: 500 KW OUTPUT: 1000 KGS PER HOUR INTENDED FOR THE FOLLOWING WASTE: OUTPUT; BOPP FILM, FLUFF, LUMPS, MDO WASTE: 900 TO 1000 KG/H; CPP FILM, FLUFF, LUMPS: 900 TO 1000 KG/H; PERFORMANCE IS PROVIDED FOR REFERENCE ONLY. THE CAPACITY OF THE DEVICE DEPENDS ON THE PROPERTIES OF THE MATERIAL, E.G. MOISTURE CONTENT, PRINTING, WEIGHT, MELT INDEX, CONTAMINATION AND DEGREE OF FILTRATION. AVERAGE POWER CONSUMPTION: 500 KW; AVERAGE COOLING WATER DEMAND: 668 L/MIN; AVERAGE FRESH WATER CONSUMPTION: 34 L/H; MAXIMUM COMPRESSED AIR CONSUMPTION: 100 L/MIN. THE VALUES GIVEN ABOVE ARE ONLY REFERENCE VALUES AND MAY DIFFER FROM THE VALUES FINAL VALUES OBTAINED AFTER CALIBRATION OF THE DEVICE. THIS DATA SHOULD NOT BE USED FOR PLANNING. Learn More