Search results for: 'mac''

TT-4253 SHEEP WOOL MINI CARDING MACHINE SMALL CARDER HIGH EXTRACTION RATE CASHMERE CARDING MACHINE SHEEP WOOL PROCESSING MACHINERY – NEW IF ITS CASHMERE OUTPUT: 5 TO 8KG, AND PROCESS WOOL 40 KG/H STRIPPING METHOD: MOTE KNIFE STRIPPING TOTAL POWER: 16.65KW MACHINE WEIGHT: 20TS OVERALL SIZE: 18670 X 2000 X 2200mm FIBER DAMAGED RATE: <15% COMPREHENSIVE EXTRACTION RATE: >95% QUANTITY: 1 Learn More

YY-2595 1 X 2M COBBLE FRS 12 GAUGE LOOP PILE TUFTING MACHINE (REFURBISHED 2017) (MACHINE ONLY !), WORKING WIDTH 2000mm MANUFACTURER: COBBLE WORKING WIDTH: 2000mm YEAR: REFURBISHED 2017 TUFTING MACHINE ONLY: NO FABRIC ACCUMULATOR NO INSPECTION FRAME NO CREEL QUANTITY: 1 Learn More

J-4504 RUBBER EVA SPLITTING MACHINE (SKIVING MACHINE), WORKING WIDTH 1780mm WEIGHT: ABOUT 3.5 TONS REQUIRES 1 20 FOOT CONTAINER QUANTITY: 1 Learn More

S-1166 SEMI-AUTO TIPPING MACHINE, MACHINE DIMENSION 800 X 650 X 900mm

SEMI-AUTO TIPPING MACHINE
IT IS WIDELY USED FOR TIPPING CORDS, SHOELACES, ROPES ETC
IT IS EASY TO PRODUCE DIFFERENT SIZES OF SHOELACE BY CHANGING THE GEAR
ADOPTING FREQUENCY CONTROL
OUR MACHINES POSSESS AUTO-STOP SYSTEM
WRAPPING CENTER YARN FEEDING SYNCHRONOUSLY
AND THAT CAN ACHIEVE LOW WASTE AND HIGH PRODUCTIVITY
WITH HIGH QUALITY WORK AND REASONABLE STRUCTURES
IT RUNS STABLY IN LONG LIFETIME
WITH GOOD DESIGNATION
EASY AND SECURITY OPERATION
THE MAINTENANCE OF IT IS EASY AND CONVENIENT
ADOPTING FREQUENCY CONTROL MOTOR IS EASY TO CONTROL THE SPEED
AND PROTECT THE LOAD
HANGING INDUSTRIAL CERAMIC EYELETS AT THE YARN OFF-TRACK POINT TO INSTEAD PERFORATION WORK AND IT IS EASY TO CHANGE THE BOBBIN
AND ADJUST THE SPRING FOR THE USING OF NEW TYPE SPINDLE
SEMIAUTOMATIC TIPPING MACHINE:
VOLTAGE: 220VAC, SINGLE PHASE, 50HZ, 0.75KW
OUTPUT CAPACITY: 40 PIECES/MIN
MACHINE WEIGHT: 160 KGS
MACHINE DIMENSION: 800 X 650 X 900mm

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-3674-A
WISE PILLOW MACHINE FILLING MACHINE

 

PLATE INFO FOR THE HOPPER:
DATE: JUNE/00
MOD. NO.: WK 4×36
PLATE INFO FOR THE FIRST BLOWER:
DATE: JUNE/00
MOD. NO.: 4C 113

PLATE INFO FOR THE SECOND BLOWER:
DATE: JUNE/00
MOD. NO.: 4C 113

PLATE INFO FOR THE CONTROL PANEL:
DATE: JUNE/2000
MOD. NO.: SYSTEM 1

NOTE: THE HOPPER APRON WIDTH: 35 ½” INCHES

AFTER THE HOPPER THERE IS ANOTHER MACHINE WHICH MIGHT BE A FINE OPENER WITH (2) BLOWERS, (2) NOZZLES AND (1) CONTROL PANEL

QUANTITY: 1

Learn More

S-1179 FULL AUTOMATIC TIPPING MACHINE, MACHINE DIMENSION 2900 X 1230 X 1660mm

FULL AUTOMATIC TIPPING MACHINE
IT IS WIDELY USED FOR TIPPING CORDS, SHOELACES, ROPES ETC.
IT IS EASY TO PRODUCE DIFFERENT SIZES OF SHOELACE BY CHANGING THE GEAR
ADOPTING FREQUENCY CONTROL
OUR MACHINES POSSESS AUTO-STOP SYSTEM
WRAPPING CENTER YARN FEEDING SYNCHRONOUSLY
AND THAT CAN ACHIEVE LOW WASTE AND HIGH PRODUCTIVITY
WITH HIGH QUALITY WORK AND REASONABLE STRUCTURES
IT RUNS STABLY IN LONG LIFETIME
WITH GOOD DESIGNATION
EASY AND SECURITY OPERATION
THE MAINTENANCE OF IT IS EASY AND CONVENIENT
ADOPTING FREQUENCY CONTROL MOTOR IS EASY TO CONTROL THE SPEED
AND PROTECT THE LOAD
HANGING INDUSTRIAL CERAMIC EYELETS AT THE YARN OFF-TRACK POINT TO INSTEAD PERFORATION WORK AND IT IS EASY TO CHANGE THE BOBBIN AND ADJUST THE SPRING FOR THE USING OF NEW TYPE SPINDLE
AUTOMATIC TIPPING MACHINE:
VOLTAGE: 220VAC, SINGLE PHASE, 50HZ, 1.5KW
OUTPUT CAPACITY: 15000 PAIRS/8H
MACHINE WEIGHT: 700 KGS
MACHINE DIMENSION: 2900 X 1230 X 1660mm

QUANTITY: 1

Learn More

TT-2363 LION AUTOMATIC BLOWER, NOZZLES 2, YEAR 2011 QUANTITY: 1 Learn More

V-1961 AUTOMATIC PET PAD MAKING MACHINE – 400 PADS PER MINUTE – 350KW-480,000 PADS IN 20 HOURS (PER 3-SHIFT DAY, AFTER REMOVING EFFICIENCIES = 500,000 PADS PER 24 HOURS) FULLY AUTOMATIC PET PAD MAKING MACHINE THE MACHINE OPERATORS JOB IS ONLY TO ADD THE RAW MATERIALS AND VERIFY THAT THE MACHINE IS RUNNING PROPERLY. ABSORBENT CORE CRUSH, MIX AND MAKE THE CORE. TOP SHEET, ABSORBENT CORE, BACK SHEET (PE FILM), LAMINATED. FINAL PRODUCTS ARE FOLDED HORIZONTALLY CUTS PAD INTO FINAL SIZE CREATES VERTICAL FOLD MAIN TECHNICAL PARAMETERS: DESIGN SPEED: 300 METERS PER MINUTE (60mm x 90mm) WORKING SPEED: 250 METERS PER MINUTE (60mm x 90mm) QUALIFIED RATE: >98% EFFICIENCY: >85% INSTALLED POWER: 300 KW (MAIN MACHINE) ELECTRICITY: 480 VOLTS, 60 Hz AIR PRESSURE: 0.6 MPA, 2.6 m3 PER MINUTE TOTAL WEIGHT: 65 TONS PRODUCT SIZE: 400mm x 600mm, 600mm x 600mm, 900mm x 600mm, 560mm x 560mm, 4 SIZES, ACCORDING TO ORDER QUANTITY: 1 Learn More

MODEL 1600-H2Y-1360-1710-C7H SPECIFICATION 1.MIXING BOX: 1400 X 1200 X 2200mm 2.FOAM GRINDER: 2500 X 680 X 860mm 3.FIBER OPENER (1710-A7H): 2200 X 1080 X 1070mm VOLTAGE 220 VOLTS 60Hz POWER 0.75 X 2+5.5+4 +2.2 X 3 KW = 16.2 OUTPUT 100 TO 300 KG/H MIX PERCENTAGE ABOVE 98% LABOR 3 PERSONS WEIGHT 1530 KG LABOR 3 PERSONS WEIGHT 1530KG MACHINE DETAILS ONE FOAM SHREDDING MACHINE , ONE FIBER OPENING MACHINE, ONE FEEDING MACHINE, ONE MIXING BOX, TWO FIBER OR FOAM STUFFING NOZZLES (WITH FANS) STATIONS PRODUCT INTRODUCTION :  THIS MACHINE IS A NEW MACHINE TO FILL PILLOWS, CUSHIONED SOFA SECTIONS, ETC.  ITS GREAT ADVANTAGE IS THAT IT WILL NOT PRODUCE GRANULES AND BALL GRAINS WHEN MIXING CELLUCOTTON AND FOAM, PRODUCING A PRODUCT THAT FILLS WITH EXCELLENT ELASTICITY AND A SMOOTH SURFACE (FOR PILLOWS, A SMOOTH SURFACE IS ESPECIALLY IMPORTANT.)  MAIN FUNCTION : IT CONSISTS OF A FOAM SHREDDER, A FIBER OPENER, A MIXING STATION AND TWO FILLING NOZZLES. BY SIMPLY PUTTING THE FOAM (INCLUDING SCRAP ),RAW COTTON (NON-CARDED AND CELLUCOTTON) INTO THE MACHINE, IT WILL AUTOMATICALLY OPEN THE CELLUCOTTON AND SHRED THE FOAM. THE DOSAGE RATIO OF EACH RAW MATERIAL CAN BE ADJUSTED OPTIONALLY, EVENLY MIX THEM AND THEN FILL INTO THE PRODUCT. QUANTITY: 1 Learn More

TT-8178 TETRA PAK FILLING MACHINE A3 FLEX 7500 BPH, YEAR 2016 1. BRAND: TETRA PAK® 2. MODEL: A3FLEX 3. YEAR: 2016 4. SPEED: 7500 BPH 5. PRODUCTS: DAIRY, JUICE 6. CONTAINERS: BRIK Learn More