Search results for: 'Roll e'

REFERENCE NUMBER: M-4249 (10105MNAD9UC) K SANTEX OPEN WIDTH COMPACTOR YEAR 1996 WIDTH 2200mm SANTEX OPEN WIDTH COMPACTOR WIDTH 2200mm TYPE SANTACOMPACT YEAR 1996 CONSISTS OF: TENSION BAR, LATTICE ROLL GUIDER W/FULL WIDTH SENSOR OPERATOR PLATFORM, OPEN VERTICAL PIN TENTER FOR KNITS, TANDEMATIC SPLIT LEVEL UNCURLERS, OVERFEED, PINNING BRUSHES, STEAMING SECTION, RAIL GUIDES, GUMMING, SELVEDEGE TRIMMING, OPEN WIDTH COMPACTOR FELT TYPE SCRAY, 2 ROLL BATCHER WITH EDGE GUIDING AND INSPECTION BOARD. QUANTITY: 1 Learn More

REFERENCE NUMBER: K-6704 KUSTERS CONTINUOUS BLEACHING RANGE YEAR: 1992 CAPACITY: 2000 METERS KUSTERS CONTINUOUS BLEACHING RANGE YEAR: 1992 UPGRADED IN YEAR: 2011 ROLLER WIDTH: 3400MM FABRIC WIDTH: 3200MM 3 PRE-WASHING COMPARTMENTS IMPREGNATIONS PADDER REACTION CHAMBER WITH ROLLER BED AND TIGHT STRAND CAPACITY 2000 METERS 4 x WASHING COMPARTMENTS EXIT BATCHER INVERTER CONTROL EXCELLENT CONDITION QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5147 (1212NDTYXX11) L COTTON PAD MAKING MACHINE PUT ON MAKE-UP THE COTTON AND KAPOK PRODUCTION PROCESS: THE EQUIPMENT IS DIVIDES CUTS THE GOOD DEGREASING TO LAP, THE ADHESIVE-BONDED CLOTH OR THE GAUZE, LAYING ASIDE RAW MATERIAL AFTER THE COMPACTION, THE HEATING EMBOSSES, ROLLS CUTS PROCESS ONE TIME TO COMPLETE. MAIN FEATURE THE HIGH SPEED PUNCH PRESS REVOLVING BLANKING PRINCIPLE OF WORK, THE TECHNOLOGY IS MATURE, THE WORK IS STABLE, THE SERVICE WORK LOAD ARE FEW, OUTPUT MODE: THE PIPELINE ARRANGEMENT OUTPUT, THE CODE FALLS NEATLY, THE BAGGING IS CONVENIENT, A PERSON THEN OPERATES THE COMPLETE MACHINE, BIG REDUCED ARTIFICIAL AMOUNT OF USE; THE GOOD MAN-MACHINE OPERATION CONTACT SURFACE, MAY UNFOLD THE REAL TIME OPERATION INFORMATION, IS ADVANTAGEOUS FOR THE PRODUCTION MONITORING; THE MOLD REPLACEMENT IS CONVENIENT, THE CONSTRUCTION COST IS LOWER THAN GREATLY ROLLS CUTS THE CARVING FLOWER CUTTER BAR, MOREOVER AFTER THE MOLD WEARS, EASY TO REPAIR, DOES NOT NEED TO DISCARD THE REPLACEMENT, SAVES THE MAINTENANCE COST. PUT ON MAKE-UP THE COTTON AND KAPOK MAJOR TECHNIQUE PARAMETER: PRODUCTION SPEED: 20--30M/MIN PRODUCTION SPECIFICATION: MAY ACCORDING TO THE REQUEST ADJUSTMENT TOTAL POWER: 5KW MACHINE DIMENSION: 3.5M*1.7M*2.5M MODEL: A QUANTITY: 1 Learn More

- MANUFACTURER BENNINGER - YEAR OF CONSTRUCTION 1991 - ROLLERS WIDTH 2.000 mm - WORKING WIDTH 1.800 mm Learn More

REFERENCE NUMBER: A-1184 (1212GHBXX11) A REGGIANI ROTARY PRINTING MACHINE MODEL RQ2, WORKING WIDTH 3200MM, 9 COLORS ROTARY PRINTING MACHINE MANUFACTURER REGGIANI MODEL RQ2 N° 9 MAGNETIC HEADS, (EXPANDABLE UP TO 12 HEADS) N° 9 COLOR PUMPS MAX WORKING WIDTH 3200 MM OVEN WITH 4 CHAMBER OIL HEATED QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5046 (1212SPKZXX11) L RIETER G33 RING SPINNING FRAME YEAR 2001 G33 RIETER RING SPINNING FRAME, YEAR 2001G33 RIETER RING SPINNING FRAME, YEAR 2001 CREEL FOR BOBBIN OF 6” X 16” BOBBIN HOLDERS TYPE KAMPATZU DRAFTING DEVICE RIETER PNEUMATIC TYPE P-3 TYPE OF DRAFT 3 OVER 3 TOP CLEARERS FITTED 1 BOTTOM ROLLER DAIEMETER 27mm, BEARING SKF, 2 BOTTOM ROLLERS DIAMETER 27mm, BEARING SKF DIMENSION OF APRO PR 30, TOP ROLLER WITH PRES FIT YARN BRACKAGE SUCTION SPINDLE BY SPINDLE NUMBER OF SPINDLES 1,008 SPINDLES DRIVED BY TYPE (ONE TYPE 4 SPINDLES) SPINDLES LIFT 170mm TUBE LIFT 210mm WHALVE DIAMETER 20.5mm SPINDLES DRIVEN BY RINGS MAKER, DIAMETER 42mm FLANGE 1, AUTOMATIC DOFFING TYPE RIETER TYPE OF COPS PICKING 210 MEMBRANE DIAMETER 30mm SUCTION FAN 5.5HP MAIN MOTOR HP 37KW TRAVELLING CLEANER ONE EACH MACHINE CENTRALIZED COLLECTION DISTANCE BETWEEN THE MIDDLE THE MACHINE 2500mm VOLTAGE 380.3.50/60HZ QUANTITY AVAILABLE: 3 Learn More

REFERENCE NUMBER: M-4835 (1111VEHJXX10) L POWER AND INDUSTRIAL PLANTS FOR SALE QTY. OUTPUT (MW) DESCRIPTION MANUFACTURER/ TYPE BUILT/ CONDITION 1 230 COMBINED CYCLE GAS TURBINE POWER PLANT SIEMENS V94-2 1988 1 220 COMBINED CYCLE POWER PLANT 50 HZ, FUEL: DUAL FUEL (NATURAL GAS OR HFO/DIESEL) GE FRAME 6B CCPP 1992, RUNNING HOURS: 135 000, PREUSED 1 180 GAS TURBINE 125 MW, STEAM TURBINE 55 MW, 50 HZ, FUEL LFO AND NG GE FRAME 9E CCPP 2005, RUNNING HOURS: 2000 2 128 COMPLETE POWER PLANTS, 15 KV, FUEL: NATURAL GAS AND LIGHT OIL GE FRAME PG9171E NEW 2 127 GAS TURBINE PACKAGES FIAT AVIO MODEL TG 50 – D5 1998,DISMANTLED, OVERHAULED, UPGRADED FROM SIEMENS AND DISMANTLED 2 125 COMPLETE PLANT, 2 UNITS ABB GAS TURBINE PACKAGES, FUEL: DUAL FUEL, 50 HZ ABB, 50WT 18H-66 1995, JUST OVERHAULED, WARRANTY POSSIBLE 1 93 COMBINED CYCLE POWER PLANT. FUEL : NATURAL GAS GE FRAME 6FA 1997 MAJOR INSPECTION IN 2009 1 73 COMBINED CYCLE POWER PLANT. FUEL: NATURAL GAS. 50 HZ. SIEMENS WESTINGHOUSE AND MITSUBISHI. 1999, RUNNING HOURS 97 000 1 70 COMBINED CYCLE POWER PLANT THOMASSEN/ABB 2009, RUNNING HOURS UNDER 90 000 CONDITION GOOD, 2009 OVERHAULED 5 66 GAS TURBINE PACKAGES, 50 OR 60 HZ ROLLS ROYCE, TRENT 60 2014, RUNNING HOURS ZERO 3 49 GAS TURBINE POWER PLANT, 50 HZ 3 UNITS GE LM 6000 PC 2004, RUNNING HOURS 6000 QTY. OUTPUT (MW) DESCRIPTION MANUFACTURER/ TYPE BUILT/ CONDITION 1 46 COMPLETE PLANT, INCLUDES 5 GAS TURBINE PACKAGES, INCLUDING 1 STEAM TURBINE, BOILER AND AUXILIARIES. FUEL: NATURAL GAS AND NAPHTA. 50 HZ. SIEMENS TYPHOON AND ALSTOM. 2000, LOW HOURS, STILL IN OPERATION 1 42 COMBINED CYCLE POWER PLANT. FUEL: NATURAL GAS. 50 HZ. GE LM 6000PA 1997, LAST HOT END OVERHAUL WAS AT 86.080 HOURS IN AUG 2010 1 41 GAS TURBINE PACKAGE WITH HRSG, 50HZ FUEL: NATURAL GAS/FUEL OIL THOMASSEN PG-6541 1995, LAST OVERHAUL AT 118350 1 40 COMBINED CYCLE POWER PLANT. FUEL: NATURAL GAS AND LIGHT OIL. 50 HZ. GE FRAME 6 B, DRY LOW NOX 1992, RECENTLY OVERHAULED, STILL GOOD FOR MORE THAN 24.000 RUNNING HOURS. READY TO SHIP. 5 37 GAS TURBINE PACKAGES, DUAL FUEL, 50/60 HZ SGT 750 SIEMENS NEW, ZERO HOURS 1 31,2 GAS TURBINE PACKAGES, 31,2 MW , 50/60 HZ, SGT 700 NEW, ZERO HOURS 5 31 GAS TURBINE PACKAGES, DUAL FUEL, 50/60 HZ GE TM2500 NEW 1 29,65 GAS TURBINE GENERATOR, 50 HZ, 11 KV SGT 700 2011, RUNNING HOURS ZERO (NEW) 1 27 COMBINED CYLE POWER PLANT, 27 MW, NATURAL GAS GE RLM 2500 PE AND ALSTOM STEAM TURBINE GAS TURBINE 1994, STEAM TURBINE 1996 1 26,59 GAS TURBINE, FUEL: GAS FRAME 5, PG-5371 PA 1995, RUNNING HOURS 174,104 4 24,6 CORE ENGINE FUEL: NATURAL GAS, 50 HZ SIEMENS SGT 600 (EX ABB GT 10B) 1994-1997, ZERO HOUR OVERHAULED 1 16 GAS TURBINE PACKAGE DUEAL FUEL ROLLS ROYCE AVON 1534-102L ZERO HOUR OVERHAULED IN 2008 1 14,25 NATURAL GAS ENGINE SOLAR TITAN 130 SOLONOX, 50 HZ TURBOMACH T19501 2007, ZERO RUNNING HOURS, AS NEW 3 12,9 GAS TURBINES SIEMENS, 60 HZ SIEMENS SGT 400 2014, NEW NEVER USED 1 11,86 GAS TURBINE, 60 HZ SOLAR MARS 100 15000 SOLONOX 1996, RUNNING HOURS 34 000 SINCE LAST OVERHAUL 2 9,2 CHP PLANT ELECTRIC, NATURAL GAS AND LIGHT DIESEL&BOTH SOLAR CENTAUR 50 T5701 2005 AND 2008, RUNNING HOURS 26 000 AND 2 500 1 8,8 COMBINED CYCLE GAS TURBINE POWER PLANT. 60 HZ. SOLAR MARS 90. 1989, LAST MAJOR OVERHAUL IN 2004, ONLY 1225 RUNNING HOURS 1 7,5 NATURAL GAS ENGINE SOLAR TAURUS T70, 50 HZ TURBOMACH SOLONOX + WHRB 2007, ZERO RUNNING HOURS AS NEW 1 5,5 GAS TURBINE, 50 HZ, NATURAL GAS SGT 200 1989, RUNNING HOURS 126 340 QTY. OUTPUT (MW) DESCRIPTION MANUFACTURER/ TYPE BUILT/ CONDITION 1 5,2 DUAL NATURAL GAS AND OIL ENGINE TAURUS 60, 50 HZ SOLAR TAURUS 60, SOLONOX T7301 1998, RUNNING HOURS17 700 1 1,4 GAS TURBINE PACKAGE INCL. HRSG, 50 HZ KAWASAKI KA 1334 1995, RUNNING HOURS AFTER MAJOR OVERHAUL 4000 Learn More

REFERENCE NUMBER: M-4497 (1111TSDGXX10) D BENNINGER MERCERIZING LINE FOR WOVEN FABRICS 1992 3200MM YEAR: 1992 ROLLER WIDTH: 3400MM WORKING WIDTH: 3200MM COMPOSED OF: HIGH FABRIC FEEDING FRAME WITH TENSIONER PRE-WETTING DEVICE ROLLER MERCERIZING SECTION STABILIZING SECTION 3 WASHING AND NEUTRALIZING COMPARTMENTS WITH INTERMITTENT SQUEEZERS COMPLETE ELECTRIC CONTROL CABINET 380V, 50HZ MACHINE IN EXCELLENT CONDITION STILL ERECTED ON MILLS FLOOR AND CONNECTED TO POWER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3489 (880NWTYXX7)-D AUTOMATIC MATTRESS WRAPPER SINGLE/QUEEN/KING (88” WIDE) GOOD FOR 18”-20” HIGH MATTRESS AUTOMATIC MATTRESS WRAPPER SINGLE/QUEEN/KING WITH 14 ROLLERS AT THE ENTRANCE CONVEYOR WIDTH OF ROLLERS: 86” WITH (2) SEALERS: LENGTH 100” MAX. DISTANCE BETWEEN THE SEALERS: 80 ¾” MAX. HEIGHT OF SEALERS FROM TABLE: APPROX. 9” THIS WRAPPER HAS A FIXED HEIGHT OF 17” IT INCLUDES (1) METAL TABLE AT THE END OF THE ENTRANCE WIDTH OF TABLE: 72” DEPTH OF TABLE: 51” WRAPPER EXIT WIDTH: 83” MAX. DISTANCE BETWEEN RIGHT AND LEFT SIDE OF THE BAGGER: 89 ½” MAX. WORKING HEIGHT: 17” (430mm) THE INSIDE DISTANCE BETWEEN THE RIGHT SEALER AND LEFT SEALER: 76 ½” QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3006

AUTOMATIC MATTRESS WRAPPER SINGLE/QUEEN/KING (88” WIDE)

 

AUTOMATIC MATTRESS WRAPPER

SINGLE/QUEEN/KING

WITH 14 ROLLERS AT THE ENTRANCE CONVEYOR

WIDTH OF ROLLERS: 86”

WITH (2) SEALERS: LENGTH 100”

MAX. DISTANCE BETWEEN THE SEALERS: 80 ¾”

MAX. HEIGHT OF SEALERS FROM TABLE: APPROX. 9”

THIS WRAPPER HAS A FIXED HEIGHT OF 17”

IT INCLUDES (1) METAL TABLE AT THE END OF THE ENTRANCE

WIDTH OF TABLE: 72”

DEPTH OF TABLE: 51”

WRAPPER EXIT WIDTH: 83”

MAX. DISTANCE BETWEEN RIGHT AND LEFT SIDE OF THE BAGGER: 89 ½”

MAX. WORKING HEIGHT: 17” (430mm)

THE INSIDE DISTANCE BETWEEN THE RIGHT SEALER AND LEFT SEALER: 76 ½”

Learn More