Search results for: 'Roll e'

REFERENCE NUMBER: M-4514 (1111TDVDXX10) D ROSIQUE CARDING MACHINES AP 2082 1993 MODEL: AP 2082 YEAR: 1993 AUTOLEVELLER USTER EXIT CAN 14” X 42” CHUTE FEED ROSIQUE FROM NEU PROJECT MACHINE WHIT 8 DRUMS (4 WORKER ROLLERS AND 4 STRIPPING ROLLERS) REVOLVING FLAT WHIT 106 FLATS 380 VOLTS 50 HZ QUANTITY AVAILABLE: 7 Learn More

BRUCKNER STENTER MODEL SPLITFLOW TWINAIR YOC 2002 Learn More

SANFORIZING RANGE Learn More

REFERENCE NUMBER: M-1586 (66015TRV5UX) CHIP SPINNING LINES FILAMENT QUANTITY AVAILABLE: 32 UNITS Learn More

SULZER PS 143" ES E6 D1 WORKING WIDTH 3600mm (143") CAM BOX INSTALLEDWITH 6 HARNESS LEVERS SINGLE COLOR ELECTRONIC LET OFF WITH TWIN BEAMS SET UP SINGLE WHIP ROLLS EACH LOOM IS EQUIPPED WITH: 6 HEALD FRAMES 1 WEFT FEEDER 1.25 WARP BEAMS OF 940mm DIAMETER 1.25 CLOTH ROLLS 6000 HEALDSAND DROPPERS 1 CENTRE TUCKING IN Learn More

TORRES MODEL MICROPUNT-153 SUEDING/EMERIZING MACHINE YEAR 2000 WIDTH 2000mm COMPLETE WITH DUST SUCTION FILTERS IT IS THE ONLY MACHINE ON THE MARKET WHICH CAN REALLY SUEDE BOTH HEAVY COTTON TWILL AND A LIGHT AND ELASTIC KNITTED FABRIC SUCH AS LYCRA. AS THE FABRIC CONTENT IS WITHIN THE WORKING AREA (ONLY 65 CM.), THE TENSION OF THE SAME CAN BE CONTROLLED PERFECTLY, AND THIS IS A MUST, IF YOU WANT TO OBTAIN A UNIFORM FINISH. EXTREMELY HIGH ABRASIVE/FABRIC EXCHANGE DUE TO THE FACT THAT ITS SUEDING ROLLERS ARE MANUFACTURED WITH HIGHLY ACCURATE CALIBRATED STEEL TUBE, DYNAMICALLY BALANCED AND TURN AROUND BEARINGS AT EXTREMELY HIGH SPEED (18 M/S). INNER COOLING OF THE SUEDING ROLLERS BY FORCED AIR FLOW. FABRIC SPEED BY MEANS OF ASYNCHRONOUS MOTORS DRIVEN BY A VECTORIAL INVERTER. FABRIC TENSIONING BY MEANS OF A PNEUMATIC SYSTEM OF OUR OWN DESIGN. CONTACT ARC VARIABLE BY MEANS OF A MOTORIZED SYSTEM. POSSIBILITY OF USING A CONVENTIONAL AND/OR A DIAMOND (LONG LIFE) ABRASIVE. AUTOMATIC SEAM PASSAGE. STATIC ELIMINATOR. FABRIC CLEANING BY MEANS OF A BEATING/BRUSHING PROCESS WITH A SUCTION NOZZLE. DUST SUCTION AND COLLECTION SYSTEM. ALL THE WORKING PARAMETERS ARE SHOWN ON THE PANEL AND THEY MAY BE REPRODUCED FAITHFULLY Learn More

SULZER RUTI P7200 (K3) WIDTH 153" (3900mm) YEAR 1993 CARBON PROJECTILE CAM MOTION LET OFF ELECTRONIC TAKE UP MECHANICAL 6 HEALD FRAMES (C.TYPE) 6000 HEALD WIRES AND DROPPERS 1 ACCUMULATOR PER LOOM IRO LASER MODEL 1 FEEDER PER LOOM ORIGINAL 8 TO 10 HARNESS LEVERS PER LOOM 4 PIECE SERATED/DROPPER BAR PER LOOM 1.5 BEAMS-CLOTH ROLLERS = 3 BEAMS-CLOTH ROLLERS PER LOOM NEEDLE SYSTEM: SIDE TUCKING NO CENTER TUCKING NO DOBBY 2 COLOR LOOMS 1 COLOR RUNNING 6 CAMS - 3/1 & 1/1 PER MACHINE QUANTITY: 32 Learn More

REFERENCE NUMBER: K-2008

TANDEM SET OF GESSNER LYNX 2000 NAPPERS YEAR 1997

 

TWO GESSNER LYNX 2000 KNIT GOODS AND DOUBLE ACTING 108” ELECTRONIC NAPPERS

VERY GOOD CONDITION

INCLUDES TWO SETS OF SPARE NAPPER ROLLS, ROLL SHARPENER AND GRINDER, FLOCK HOUSING

RACKS NOT INCLUDED WITH SPARE ROLLERS

YEAR:  1997

108” FACE WIDTH

ELECTRIC DRIVE

TWO NAPPERS ONE IN FRONT OF THE OTHER

24-ROLL NAPPERS

DOUBLE ACTING HAS TO DO WITH THE TYPE WIRE ON THE ROLLS AND THE DIRECTION THAT THE CYLINDER TURNS.

THE GESSNER “LYNX” ELECTRONIC NAPPER IS MADE TO RUN EITHER KNITS OR WOVENS; THERE IS A KEY WHICH YOU TURN TO SELECT THE MODE YOU WANT, KNIT-OR-WOVENS, AND THE CYLINDER REVERSES.

 

QUANTITY:  1

 

(EMAIL US FOR PICTURES)

Learn More

C-3994 BARGEMOUNTED POWER PLANT, CAPACITY 220MW

A. ONCE THROUGH STEAM GENERATOR
B. BARGE
C. CHILLERS
D. AIR COMPRESSOR
E. GAS TURBINE
F. STEAM TURBINE
G. FEEDWATER SYSTEM
H. CLOSED COOLING WATER SYSTEM
I. AUXILIARY COOLING WATER SYSTEM
J. CONDENSATE POLISHING UNIT (CPU)
K. WASTE WATER SYSTEM
L. PLANT ELECTRICAL SYSTEM
M. BLACK START DG SET
N. PLANT CONTROLS AND INSTRUMENTATION
O. PLANT FIRE FIGHTING SYSTEM
P. START UP VACUUM SYSTEM
Q. STEAM TURBINE DEAERATING CONDENSER

QUANTITY: 1 PLANT

Learn More

REFERENCE NUMBER: K-3351 CHICKEN SLAUGHTERING LINE – 1000 TO 1500 BIRDS PER HOUR QUANTITY AVAILABLE: 1 Learn More