Search results for: 'Auto+8'

REFERENCE NUMBER: A-1264 (01017149012R) A BALING PRESS FOAM F2500 22KW-415V/50HZ-43A QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-8976 RIETER G33 SPINNING YEAR 1999-2000 RIETER G33 199/2000/1 576 SPINDLES WITH CORE DEVICE AUTODOFF (NOT LINKED) 75mm GAUGE 45mm RING 1 METER WIDE AND 33 METERS LONG WITH AUTOMATIC ROVING BREAK DETECTION STILL INSTALLED ON FACTORY FLOOR POWER IS OFF READY TO DELIVER APPROXIMATELY 1 METER WIDE AND 100 FEET LONG HAVE 3 LONG MACHINES AND 1 SAMPLE MACHINE REMAINING ONE OF THESE HAS PINTER DEVICE FOR CORE YARNS MORE PINTER UNITS AVAILABLE FOR THEM AT EXTRA COST PINTER UNITS – GREY COLORED, YEAR 1995 PINTER UNITS – BLUE COLORED, YEAR 2001 HAVE LYCRA ATTACHMENT AS WELL QUANTITY: 1 SAMPLE + 3 REGULAR LENGTH Learn More

REFERENCE NUMBER: M-5285 (1313JCMNXX12RC) L TEPA JTE-1500 ELECTRONIC ATMOSPHERIC JIGGER YEAR 2001 TEPA ELECTRONIC JIGGER MODEL JTE-1500 TYPE 13000 (ATMOSPHERIC) YEAR 2001 FACE ROLLER WIDTH: 2400mm WORKING WIDTH: 3200mm MAXIMUM WINDING DIAMETER: 1500mm MINIMUM WINDING DIAMETER: 500mm ELECTRONIC DRIVE WITH LENZE INVERTERS SETEX 838 DYE CYCLE CONTROLLER AUTOMATIC DEVICE FOR CENTERING THE FABRIC DURING THE LOAD VAT MAXIMUM CAPACITY 2530 L RUNNING SPEED 20 TO 180 M/MIN FABRIC CAPCITY = 1570/FABRIC THICKNESS IN mm 2 ADDITIONAL VATS EACH 500 L CAPACITY, WITH MIXERS AND ADDITIONAL PUMP WITH BOX FILTER 2 DRAIN VALVES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5283 (13131CKAKT12U) L ELMARCO NANOSPIDER PRODUCTION LINE NANOSPIDER PRODUCTION LINE NS 4S1000U QUANTITY AVILABLE: 1 Learn More

REFERENCE NUMBER: G-8444 PUNCHING MACHINE MODEL FST 11 MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3924 (990RYPLHH8)-D LONG BUN FOAM PEELING MACHINE CUTTING WIDTH: 2150mm CUTTING HEIGHT: 1200mm CUTTING THICKNESS: 2 TO 60Mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-9015 HORIZONTAL MOVING TABLE FOAM CUTTING MACHINE (WITH AUTOMATIC WINDING SYSTEM) TABLE IS 16 METERS LONG, TO ACCOMMODATE 50 FOOT LONG BUNS X 51" MAXIMUM HEIGHT. WITH A 2.15 METER CUTTING WIDTH AND 16 METER MOVING TABLE, THE FLOORSPACE OF THE WHOLE MACHINE IS ABOUT L 35 METERS X W 4200mm X H 2400mm (116 FEET LONG; 165" OVERALL WIDTH) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-6332 BOX MIXING TANK FOR FOAM (NEW) WITH AUTOMATIC COMPUTERIZED CHEMICAL FEED QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-5887 COMPLETE CONTINUOUS FOAM PROCESSING PLANT QUANTITY AVAILABLE: 1 Learn More