Search results for: 'bla''

REFERENCE NUMBER: M-3279

TUFTING GUN

TUFTING GUN IS PRECISION MADE, HIGH-SPEED, LIGHT WEIGHT, VERSATILE, MANEUVERABLE ARE JUST A FEW WORDS TO DESCRIBE THIS ENGINEERING MARVEL WHICH VIRTUALLY OUT-DATES ALL OTHER TUFTING MACHINES.

HAND-TUFTED CARPETS CAN BE PRODUCED AT UNBELIEVABLE SPEEDS WITH THE UTMOST ACCURACY. LIMITED ONLY BY IMAGINATION, CARPETS CAN BE CREATED IN VARIOUS HEIGHTS, IN EITHER CUT OF LOOP PILE OF LIGHT, HEAVY, OR UNCONVENTIONAL YARNS. WITH COMPLETE MANEUVERABILITY, TUFTING CAN BE IN ANY DIRECTION INCLUDING WORK IN LINE, TWISTED MOVEMENTS, OR CIRCULAR WORK OF 360 WITHOUT REMOVING THE CUT FROM THE CANVAS.

MODEL TG FEATURES:

LIGHTWEIGHT, INCLUDING MOTOR

SELF-SHARPENING CUTTING BLADE

UP TO 2050 STITCHES/RPM

CHANGES FROM CUT- TO LOOP-PILE IN SECONDS

DISSEMBLES AND REASSEMBLES IN MINUTES

COMPLETE MANEUVERABILITY

PILE HEIGHTS: CUT - 16-40mm LOOP - 8-40mm

AVAILABLE IN 110V 60 CYCLE, OR 220V/230V 50 CYCLE

SHIPPING WEIGHT: 12LBS AND DIMENSIONS: 15x15x10"

M-6299 BENTLEY MULSANNE MULLINER 4-DOOR SEDAN, YEAR 2016

MAKE: BENTLEY
MODEL: MULSANNE
TRIM: MULLINER
BODY STYLE: SEDAN
DOORS: 4 DOOR
ENGINE: 6.8L V-8 CYLINDER
TRANSMISSION: 8 SPEED AUTOMATIC

QUANTITY: 1

REFERENCE NUMBER: A-1876
END OF LINE UNIT T4.0 FOR NEEDLEPUNCHED PRODUCTS – 4000mm

PRODUCT TO BE PROCESSED: NEEDLEPUNCHED NONWOVENS
PRODUCT WIDTH: 4.000 MM

WORKING SPEED: 1 – 20 M/MIN

QUANTITY: 1

REFERENCE NUMBER: C-4330
FARREL 4LMSD COMPOUNDING LINE, 500 VOLT, CAPACITY 1500 LB/HOUR

FARREL SIZE 4LMSD CONTINUOUS MIXER
1750 RPM DC MOTOR THRU A LUFKIN MODEL S64CH GEARBOX
LUWA MAAG VACOREX MODEL 90/90 GEAR PUMP
FARREL UP-150 HOT OIL HEATED DIE FACE PELLETIZER
BERINGER
GALA SPIN DRYER
GALA 60 GPM WATER SYSTEM
GALA
STERLCO HOT OIL TEMPERATURE CONTROL UNIT
K-TRON WEIGH BELT FEEDER
K-TRON T35 FEEDER
K-TRON S200 FEEDER
(1) 220 KVA
(1) 75 KVA
(1) 63 KVA TRANSFORMERS
AND (2) CONTROL PANELS
PLATFORM
CAPACITY: 1500 LB/HOUR
ABLE TO DO FILLER COMPOUNDING
MASTERBATCH COMPOUDING

QUANTITY: 1 LINE

C-4228 EREMA RM100TVE FILM/FIBER PELLETIZING LINE, EXTRUDER 100mm, YEAR 2000 - NEW

EREMA
MODEL: #RM100TVE FILM/FIBER PELLETIZING LINE NEW
YEAR: 2000
LINE CONSISTS OF THE FOLLOWING:
100mm (4″) EREMA
MODEL: #RM100TVE EXTRUDER
EXTRUDER IS DRIVEN BY A 132 KW AC MOTOR WITH INVERTER
EXTRUDER HAS ELECTRICALLY HEATED WATER COOLED BARREL
DUAL VENT
WITH EREMA STEEL VACUUM PUMP
TEMPERATURE CONTROL PANEL WITH EREMA SERIES 988 INSTRUMENTS (16 ZONE TOTAL)
AND EISENBLISS MODEL EG250 GEARBOX

QUANTITY: 1 LINE

A-1731 GAMBA ROTARY CUTTER, WIDTH 500mm

GAMBA ROTARY CUTTER
WIDTH: 500mm
3 BLADES

QUANTITY: 1

P-2883 PONTOTOC MACHINE WORKS BAND SAW-EXTRA SIZE (ALMOST 8 FEET INSIDE TABLE-2380mm)

QUANTITY: 1

C-3995 MUNCH PELLET MILL SYSTEM, YEAR 2012

MUNCH PELLET MILL SYSTEM
CONSISTING OF:
OFFER 001
VECOPLAN INCLINED FEED CONVEYOR
APPROXIMATELY 60″ WIDE X 26′ LONG

QUANTITY: 1

OFFER 002
ENSIGN DOSING HOPPER
APPROXIMATELY 84″ WIDE X 108″ LONG X 84″ DEEP

QUANTITY: 1

OFFER 003
VECOPLAN INCLINED CONVEYOR TYPE KKF-820-2K-U
APPROXIMATELY 32″ WIDE X 84″ LONG BOTTOM HORIZONTAL SECTION X 30′ LONG INCLINED SECTION

QUANTITY: 1

OFFER 004
ROTARY DRUM MAGNET

QUANTITY: 1

OFFER 005
MUNCH DENSIFIER
APPROXIMATELY 60″ DIAMETER X 60″ DEEP

QUANTITY: 1

OFFER 006
MUNCH RING DIE PELLET MILL
MODEL: RMP660/178
YEAR: 2012

QUANTITY: 1

OFFER 007
FACE ROLLERS
APPROXIMATELY 12-1/2″ DIAMETER X 7-1/8″ FACE ROLLERS

QUANTITY: 2

OFFER 008
VECOPLAN INCLINED CONVEYOR
TYPE: VFB-800-F2
APPROXIMATELY 32″ WIDE X 72″ LONG BOTTOM HORIZONTAL SECTION X 30′ LONG INCLINED SECTION

QUANTITY: 1

OFFER 009
MUNCH PELLET COOLER
MODEL: SDCC10

QUANTITY: 1

OFFER 010
VECOPLAN INCLINED CONVEYOR
TYPE: VFB-800-F2
APPROXIMATELY 32″ WIDE X 120″ LONG BOTTOM HORIZONTAL SECTION X 10′ LONG INCLUDED SECTION

QUANTITY: 1

C-3994 BARGEMOUNTED POWER PLANT, CAPACITY 220MW

A. ONCE THROUGH STEAM GENERATOR
B. BARGE
C. CHILLERS
D. AIR COMPRESSOR
E. GAS TURBINE
F. STEAM TURBINE
G. FEEDWATER SYSTEM
H. CLOSED COOLING WATER SYSTEM
I. AUXILIARY COOLING WATER SYSTEM
J. CONDENSATE POLISHING UNIT (CPU)
K. WASTE WATER SYSTEM
L. PLANT ELECTRICAL SYSTEM
M. BLACK START DG SET
N. PLANT CONTROLS AND INSTRUMENTATION
O. PLANT FIRE FIGHTING SYSTEM
P. START UP VACUUM SYSTEM
Q. STEAM TURBINE DEAERATING CONDENSER

QUANTITY: 1 PLANT

REFERENCE NUMBER: M-6118
ROLANDO ROTARY CUTTING MACHINE WIDTH 600mm

ROTARY CUTTING MACHINE
MAKE: ROLANDO
WORKING WIDTH: 500mm

QUANTITY: 1