Search results for: 'frame 9'

REFERENCE NUMBER: M-3625 (880MQBPHH7)-D COGNETEX/SANT ANDREA RING FRAMES (10) COGNETEX FTC RING FRAMES 512 SPINDLES YEAR 1986 (29) SANT ANDREA FE RING FRAMES 512 SPINDLES YEAR 1986 TOTAL QUANTITY: 39 Learn More

REFERENCE NUMBER: C-1171 MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE, YEAR 2000, WIDTH 3600mm SPECIFICATIONS: MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC ROLLERS WIDTH: 3800 MM WORKING WIDTH: 3600 MM YOC: 2000 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-0001 MEZZERA + RAMALLUMIN CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC 3600mm YEAR 2000 MAKE: MEZZERA/RAMALLUMIN ROLLERS WIDTH: 3800mm WORKING WIDTH: 3600mm YEAR: 2000 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3471 (880OKRSHH7) L NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 4500mm TECHNICAL DATA: RAW MATERIALS: NYLON, POLYESTER, POLYPROPYLENE, GLASS FIBER, ETC. FINENESS OF FIBER: 2.5 TO 10DENIER LENGTH OF FIBER: 38 TO 76mm MIXING RATIO BETWEEN TWO FIBERS: 20 TO 100% SPEED: 6m/min (PER 2.5-6D× 38-51mm) MAX. 5000 KG/DAY (PER 22 HOURS/DAY) RANGE OF GRAM WEIGHT: 100 TO 250g/m2 CARDING MACHINE FEATURES ARE ACCORDING GRAM WEIGHT: 250G/M², 300G/M² PROCESS FLOW CHART: BALE OPENER---PER-OPENER—FINE OPENER--FEEDER---CARDING MACHINE-- CROSSLAPPER--TRANSIT APRON---HIGH-SPEED PRE-NEEDLE LOOM---(2) HIGH-SPEED MAIN NEEDLE LOOM--CALENDER---CUTTER AND REWINDER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1487 (660125KJH5RXM) CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC YEAR 2000 WIDTH 3600mm CONTINUOUS WASHING LINE IN OPEN WIDTH FOR WOVEN FABRIC MEZZERA BIANCO ROLLERS WIDTH: 3800 mm WORKING WIDTH: 3600 mm YEAR OF CONSTRUCTION: 2000 COMPOSED OF: - DOUBLE INTRODUCTION, FRAME MANUFACTURED IN PAINTED FE PROFILES , SLINGING BY ADJUSTABLE FLYWHEELS, 2 GROUPS OF WIDENING-CENTRING ROLLERS E+L KF20, FABRIC GUIDING ROLLERS IN AISI 316, DRAGGING CALANDER WITH 3 ROLLERS. - BY-PASS AND SYNCHRONIZATION BRIDGE COMPOSED OF : FRAME IN CARBON STEEL FE37, GROUP OF GUIDING ROLLERS IN STAINLESS STEEL COMPLETE WITH SELF-ALIGNED BEARINGS TO GUIDE THE FABRIC TO THE FOLLOWING SECTION . - ROLLER WASHING UNIT IN OPEN WIDTH , MOD. ACTIVA 30, WITH DOUBLE FABRIC DWELLING. - 5 INTERMEDIATE SQUEEZERS - SLAT WIDENING UNIT FOR DOUBLE ROW - SQUEEZING SYSTEM WITH : 2 ROLLERS COATED RUBBER/EBONITE, RUBBER HARDNESS 75-80 SHA, WORKING PRESSURE 3000 KG, A.C. MOTOR GEARBOX, INVERTER, PNEUMATIC DRIVE. - ROLLER WASHING UNIT IN OPEN WIDTH , MOD. ACTIVA 30, WITH DOUBLE FABRIC DWELLING. - 5 INTERMEDIATE SQUEEZERS - SLAT WIDENING UNIT FOR DOUBLE ROW - SQUEEZING SYSTEM WITH : 2 ROLLERS COATED RUBBER/EBONITE, RUBBER HARDNESS 75-80 SHA, WORKING PRESSURE 3000 KG, A.C. MOTOR GEARBOX, INVERTER, PNEUMATIC DRIVE. - ROLLER WASHING UNIT IN OPEN WIDTH, MOD. ACTIVA 20, WITH SIMPLE FABRIC DWELLING - INTERMEDIATE SEPARATOR FOR TANK SPLITTING - 5 INTERMEDIATE SQUEEZERS - SLAT WIDENING UNIT FOR DOUBLE ROW - DELIVERY GROUP WITH PNEUMATIC FOULARD OF 10 TON RUBBER/EBONITE, COMPLETE WITH BEARING FRAME AND PROTECTION CASING. RUBBER ROLLER WITH HIGH SQUEEZING EFFECT ROLLIN - SECOND DISCHARGING STACK - PUMP FOR THE BATH RECYCLING IN THE NEUTRALIZATION PART - PH-METER WITH DOSING PUMP TO NEUTRALIZE IN THE FIRST SECTION OF THE LAST TANK - BIG BATCHER, ADHERING TYPE, DRIVEN BY MOTOR WITH VARIABLE SPEED. - SLAT WIDENING UNIT FOR DOUBLE ROW - 2 DUCTING FOR THE WATER RECOVERY BETWEEN THE 2 WASHING UNITS IN OPEN WIDTH - 3 TEMPERATURE AUTOMATIC CONTROLS PER EACH WASHING UNIT - 4 SETS OF PROPORTIONAL VALVES WITH LITER COUNTER - COMPLETE MOTORIZATION OF THE LINE WITH MOTORS GROUP, ELECTRIC CONTROL CABINET AND SYNOPTICAL PANEL. - VERTICAL DRYER RAMALLUMIN COMPOSED OF 2 COLUMNS WITH 8 ROLLERS, IN ORDER TO DRY BOTH FACES OF THE FABRIC, FOR A TOTAL OF 16 DRYING ROLLERS. O MAX. WORKING WIDTH: 3600 mm. O MAX. MECHANICAL SPEED: 80 MT./MIN. O MAX. WEIGHT OF THE FABRIC, IN WIDTH 3400 mm 900 GR./LINEAR METER O FORESEEN WORKING SPEED WITH FABRIC W=3400mm W=850 GR. 40/45 MT./MIN. O FORESEEN WORKING SPEED WITH FABRIC W=3400 W=425 GR. 80 MT./MIN. O MODIFIED, AS FOLLOWS, WITH ADDITIONS OF : 2 COOLING ROLLERS, 1 SET OF ACCESSORIES FOR THE FEEDING AND RETURN OF THE COOLING WATER, SET OF COMPONENTS FOR THE CONTROL, 4 RETURN CYLINDERS, COMPENSATING GROUP ON THE INTRODUCTION SIDE, 3 SUCTIONING HOODS, 1 EXHAUSTER. Learn More

(1) MARSHALL AND WILLIAMS TENTER FRAME-100” FABRIC-4 ZONES-CLIP (1) KUSTER PAD (1) MAHLO WEFT STRAIGHTENER (1) SALVAGE EDGE TRIMMER MACHINE (HOME MADE-NO BRAND) (1) A-FRAME WINDER Learn More

TT-8545 CATERPILLAR 772G ROCK TRUCK, YEAR 2017, 9930 HOURS 1. MACHINE HOURS: 9930 - LOAD FACTOR: 22% - NEUTRAL HOURS: 2694 2. CATERPILLAR 772 ROCK TRUCK 3. CATERPILLAR C18 ACERT ENGINE QUANTITY: 1 Learn More

TT-6659 SERVO CI-FLEXOPRESS, 6 COLORS, 1200mm, YEAR 2018 1. SERVO CI-FLEXOPRESS 2. 6 COLORS 3. 1200mm 4. YEAR 2018 5. PRINTPLAS MADE IN ASIA PKF-1200mm 6. 6 COLORS CL-FLEXOPRESS SERVO-DRIVEN 7. FILM PASSING WIDTH: 1250mm 8. PRINTING WIDTH: 1200mm 9. PRINTING LENGTH: 300 TO 900mm 10. PRINTING AVAILABLE: 6+0 11. PRINTING SPEED: MAX 200 METER/MINUTE 12. DUAL UNWIND STATION 13. DUAL REWIND STATION QUANTITY: 1 Learn More

T-9717 COLD PIN PERFORATING UNITS, WORKING WIDTH 1800mm, REFURBISHED COLD PIN PERFORATING UNITS REFURBISHED WORKING WIDTH 1800mm YEAR: UNKNOWN, ESTIMATED TO BE LATE 1990’s WORKS WITH PLASTIC FILM, FOIL OR PAPER AND SOME NONWOVENS COLD PIN PERFORATING UNIT CAN BE USED FOR PERFORATING OR EMBOSSING EASY TEAR LINES FOR BAGS PRODUCT EMBOSSING FOR GRIP OR IDENTIFICATION WEB DRIVEN UNIT DIMENSIONS: 23” (585mm) WIDE X 36” (915mm) TALL X 105” (2667mm) LONG NO PINNED TOOLING IS INCLUDED WITH THE UNIT HOWEVER, A WIDE RANGE OF PINNED TOOLING CAN BE USED WITH THIS UNIT TO CREATE AN ARRAY OF HOLE SIZES AND PATTERNS. QUANTITY: 2 Learn More

REFERENCE NUMBER: C-1198 SINGLE KNIT TEXTILE EQUIPMENT, YEAR 1989 TO 1996, CAMS QUANTITY AVAILABLE: 1 Learn More